Answer:. 4. dialog metaphor
Explanation:
This is a metaphor of HCI in which interacting with the computer is much like carrying on a conversation or dialog. The user asks the computer for something, and the computer responds. The computer might then ask the user for something, and the user responds. The text provides an example that describes a manager and an assistant carrying on a conversation about messages .
N2O5 decomposes to form NO2 and O2 with first-order kinetics. The initial concentration of N2O5 is 3.0 M and the reaction runs for 3.5 minutes. If the rate constant, k, equals 5.89 × 10−3, what is the final concentration of N2O5?
Answer : The final concentration of [tex]N_2O_5[/tex] is, 2.9 M
Explanation :
Expression for rate law for first order kinetics is given by:
[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]
where,
k = rate constant = [tex]5.89\times 10^{-3}\text{ min}^{-1}[/tex]
t = time passed by the sample = 3.5 min
a = initial concentration of the reactant = 3.0 M
a - x = concentration left after decay process = ?
Now put all the given values in above equation, we get
[tex]3.5=\frac{2.303}{5.89\times 10^{-3}}\log\frac{3.0}{a-x}[/tex]
[tex]a-x=2.9M[/tex]
Thus, the final concentration of [tex]N_2O_5[/tex] is, 2.9 M
To determine the final concentration of N2O5 after 3.5 minutes using the provided rate constant and first-order kinetics, the integrated rate law is used, where the time is converted to seconds and calculations are made using the initial concentration, resulting in a final concentration of 0.17 M.
Explanation:The student is asking about the final concentration of N2O5 after a first-order decomposition reaction where the initial concentration and rate constant are provided. To find the final concentration of N2O5 after a period of 3.5 minutes, we use the first-order integrated rate law:
ln[A] = -k * t + ln[A0]
Where:
[A] is the final concentration of N2O5k is the rate constant (5.89 × 10⁻³ s⁻¹)t is the reaction time in seconds[A0] is the initial concentration of N2O5 (3.0 M)Since the time given is in minutes, we first convert it to seconds: t = 3.5 min × 60 s/min = 210 s. Now we can use the integrated rate law to find the final concentration:
ln[3.0] = -5.89 × 10⁻³ × 210 + ln[3.0]
Solving for [A], we find that the final concentration of N2O5 is 0.17 M (using appropriate exponential and logarithmic operations).
What alkene gives a mixture of acetone and propanoic acid on reaction with potassium permanganate in the presence of strong acid and water?
Answer:
(CH3)2C=CHCH2CH3
2-methylpent-2-ene
Final answer:
Propene is the alkene that when reacted with potassium permanganate in strong acidic conditions, yields acetone and propanoic acid due to the oxidative cleavage of its double bond.
Explanation:
The alkene that gives a mixture of acetone and propanoic acid when reacted with potassium permanganate in the presence of strong acid and water is propene. During this reaction, propene undergoes oxidative cleavage with potassium permanganate as the oxidizing agent. The double bond in propene is cleaved to form acetone and propanoic acid under these reaction conditions.
Oxidative cleavage of alkenes with potassium permanganate can produce various products such as ketones, acids, or even carbon dioxide, depending on the structure of the alkene and the reaction conditions. The mechanism involves the formation of a diol intermediate through syn-hydroxylation, which is then cleaved to give the resultant products.
A solution has a [OH−] of 1 x 10−9. What is the pOH of this solution?
a) 5
b) 7
c) 9
d) 12
Answer:
C) 9
General Formulas and Concepts:Math
Algebra I
LogarithmsChemistry
Acid-Base Equilibrium
Acid/BasesTitrationspH and pOH: take -log of concentrationExplanation:Step 1: Define
[OH⁻] = 1 × 10⁻⁹ M
Step 2: Find pOH
Simply take negative log₁₀ of the concentration.
Set up: pOH = -log(1 × 10⁻⁹ M)Evaluate: pOH = 9What salt is formed during the neutralization reaction between sulfuric acid left-parenthesis H subscript 2 S O subscript 4 right-parenthesis and lithium hydroxide (LiOH)?
Answer:
Li₂SO₄ is the formed salt
Explanation:
We determine the reactants dissociations:
H₂SO₄ → 2H⁺ + SO₄⁻²
LiOH → Li⁺ + OH⁻
The 2H⁺ link the OH⁻ to form water, but there is one more H⁺, so we need another OH⁻ to finally produce 2 moles of H₂O
In conclussion to determine the lithium sulfate, which is the formed salt, Li will release 2 e⁻ as this equation shows:
2Li → 2Li⁺ + 2e⁻
Now the neutralization reaction is:
2LiOH + H₂SO₄ → Li₂SO₄ + 2H₂O
The neutralization reaction between sulfuric acid (H₂SO₄) and lithium hydroxide (LiOH) results in the formation of lithium sulfate (Li₂SO₄).
The neutralization reaction between sulfuric acid (H₂SO₄) and lithium hydroxide (LiOH) is a chemical process that involves the combination of an acid and a base to form a salt and water. In this reaction, the hydrogen ions (H⁺) from sulfuric acid react with the hydroxide ions (OH⁻) from lithium hydroxide to form water (H₂O). The remaining ions combine to form the salt, which is lithium sulfate (Li₂SO₄).
The balanced chemical equation for this neutralization reaction is:
H₂SO₄ + 2LiOH → Li₂SO₄ + 2H₂O
In this equation:
- H₂SO₄ is sulfuric acid, which provides the H⁺ ions.
- 2LiOH is lithium hydroxide, which provides the OH⁻ ions.
- Li₂SO₄ is lithium sulfate, the salt formed as a result of the reaction.
- 2H₂O represents the water produced.
Lithium sulfate (Li₂SO₄) is an ionic compound composed of lithium ions (Li⁺) and sulfate ions (SO₄²⁻). It is a white crystalline solid that is soluble in water and commonly used in various industrial and laboratory applications.
This type of neutralization reaction is essential in chemistry, as it demonstrates the principles of acid-base reactions and the formation of salts. It also has practical applications in various chemical processes and industries where the control of pH and the creation of specific salts are important.
For more such questions on Acid-Base Reactions
https://brainly.com/question/10467673
#SPJ3
If 180 grams of potassium iodide is dissolved in 100 cm3 of water at 30oC, a(n) _______________ solution is formed.
Super saturated solution is formed.
Explanation:
Solubility is the property of any substance's capacity, that is the solute of the substance is dissolved in the given solvent to form the solution. We have three different types of solution, unsaturated, saturated and supersaturated solution.
Unsaturated solution is a solution with lesser amount of solute than its solubility at equilibrium.Saturated solution is a solution with the maximum solute dissolved in the solvent.Super saturated solution is a solution with more solute than it is required.The solubility of KI at 30°C is 153 g / 100 ml. Here 180 g of KI in 100 ml of water at 30°C is given, which has more solute than required, so it is super saturated solution.
Answer:
A) Saturated
Explanation:
Got it right on USA Test Prep
You take an aspirin tablet (a compound consisting solely of carbon, hydrogen, and oxygen) with a mass of 1.00 g, burn it in air, and collect 2.20 g of carbon dioxide and 0.400 g water. The molar mass of aspirin is between 170 and 190 g/mol. The molecular formula of aspirin is
Answer:
The formula of aspirin = [tex]C_9H_8O_4[/tex]
Explanation:
Mass of water obtained = 0.400
Molar mass of water = 18 g/mol
Moles of [tex]H_2O[/tex] = 0.400 g /18 g/mol = 0.0222 moles
2 moles of hydrogen atoms are present in 1 mole of water. So,
Moles of H = 2 x 0.0222 = 0.0444 moles
Molar mass of H atom = 1.008 g/mol
Mass of H in molecule = 0.0444 x 1.008 = 0.0448 g
Mass of carbon dioxide obtained = 2.20 g
Molar mass of carbon dioxide = 44.01 g/mol
Moles of [tex]CO_2[/tex] = 2.20 g /44.01 g/mol = 0.05 moles
1 mole of carbon atoms are present in 1 mole of carbon dioxide. So,
Moles of C = 0.05 moles
Molar mass of C atom = 12.0107 g/mol
Mass of C in molecule = 0.05 x 12.0107 = 0.6005 g
Given that the aspirin acid only contains hydrogen, oxygen and carbon. So,
Mass of O in the sample = Total mass - Mass of C - Mass of H
Mass of the sample = 1.00 g
Mass of O in sample = 1.00 - 0.6005 - 0.0448 = 0.3547 g
Molar mass of O = 15.999 g/mol
Moles of O = 0.3547 / 15.999 = 0.0222 moles
Taking the simplest ratio for H, O and C as:
0.0444 : 0.0222 : 0.05
= 8 : 4 : 9
The empirical formula is = [tex]C_9H_8O_4[/tex]
Molecular formulas is the actual number of atoms of each element in the compound while empirical formulas is the simplest or reduced ratio of the elements in the compound.
Thus,
Molecular mass = n × Empirical mass
Where, n is any positive number from 1, 2, 3...
Mass from the Empirical formula = 9×12 + 8×1 + 16×4= 180 g/mol
The molar mass of aspirin is between 170 and 190 g/mol
So,
Molecular mass = n × Empirical mass
170 < n × 180 < 190
⇒ n = 1
The formula of aspirin = [tex]C_9H_8O_4[/tex]
The molecular formula for aspirin can be determined through the quantities of CO2 and H2O produced by burning it. This involves calculating the quantities of each element present and obtaining an empirical formula that must be scaled to match the molar mass of aspirin. Through this process, aspirin's molecular formula is found to be C9H8O4.
Explanation:The empirical formula of aspirin can be determined by understanding the quantity of each element present in the provided quantities of Carbon Dioxide (CO2) and water (H2O) produced by burning the aspirin. From the 2.20 g of CO2, the amount of carbon is calculated to be: mass CO2 x (atomic mass of C/molar mass of CO2). Similarly, from the 0.400 g of water, the quantity of hydrogen is calculated to be: mass H2O x (2 x atomic mass of H/molar mass of H2O). The balance of the original aspirin's 1.00 g mass constitutes oxygen.
Using atomic masses (C = 12.01 g/mol, H = 1.008 g/mol, O = 16.00 g/mol), you generate the empirical formula with the simplest ratio of these elements. However, this formula will not match the molecular mass of 180.15 amu for aspirin. Therefore, a multiple is required to transform the empirical formula into the molecular formula. The required multiple is calculated as (molar mass of aspirin / molar mass of empirical formula).
Applying these calculations and steps reveals that the molecular formula for aspirin is indeed C9H8O4.
Learn more about the Molecular formula of aspirin here:https://brainly.com/question/34715205
#SPJ3
Which of the following chemical agents is used for sterilization? Which of the following chemical agents is used for sterilization? chlorine supercritical fluids Iodine mercury
Answer:
The correct answer is super critical fluids.
Explanation:
Supercritical fluids are the fluids which are compressed below their critical temperature, kept in liquid state and used above their boiling point.The most common example of this are : liquid carbon dioxide gas and water.
They have properties of gas and liquid.They can easily effuse through solids like gas and dissolves other substance in them like liquid.Chlorine and iodine are used for sterilization purposes, with chlorine commonly used as a disinfectant while iodine is used for skin disinfection in medicine. Supercritical fluids are a sterilization technique but not a chemical agent.
Explanation:Among the chemical agents listed, both chlorine and iodine are used for sterilization purposes. Chlorine, in the form of a bleach solution, is a commonly used disinfectant that kills a wide range of microorganisms. Iodine, on the other hand, is used in medicine for skin disinfection before and after surgery. However, it is to note that the term 'supercritical fluids' is a technique used for sterilization but not a chemical agent. Mercury is not a sterilizing agent either but a toxic element that is hazardous to health.
Learn more about Chemical Sterilization here:https://brainly.com/question/33573709
#SPJ6
Diffusion bonding can be used to join (check the reference book before answer): Group of answer choices Only metals, but the metals can be dissimilar Most combinations of metals and/or ceramics Only ceramics Only similar metals
Explanation:
Most combinations of metals and/or ceramics is the correct option suitable for the given statement. Diffusion bonding or diffusion welding is a process in which solid-state joining is done that is used for joining a number of similar and dissimilar metals and ceramic combinations. It produces both small and large components after the diffusion bonding. The process is usually dependent on time, the pressure applied, bonding between the bonds, the temperature, and the method of applying heat. The principle used in this process is of solid-state diffusion. In this principle, the atoms of two solid, or metal surfaces intermix themselves over time.A saturated solution of Pb(IO3)2 in pure water has a lead ion concentration of 5.0 x 10-5 Molar. What is the Ksp value of Pb(IO3)2? A. 1.0 x 10-5 Molar B. 5.0 x 10-5 Molar C. 1.0 x 10-13 Molar D. 2.5 x 10-13 Molar E. 5 x 10-13 Molar
Answer:
Option (E) is correct
Explanation:
Solubility equilibrium of [tex]Pb(IO_{3})_{2}[/tex] is given as follows-
[tex]Pb(IO_{3})_{2}\rightleftharpoons Pb^{2+}+2IO_{3}^{-}[/tex]
Hence, if solubility of [tex]Pb(IO_{3})_{2}[/tex] is S (M) then-
[tex][Pb^{2+}]=S(M)[/tex] and [tex][IO_{3}^{-}]=2S(M)[/tex]
Where species under third bracket represent equilibrium concentrations
So, solubility product of [tex]Pb(IO_{3})_{2}[/tex] , [tex]K_{sp}=[Pb^{2+}][IO_{3}^{-}]^{2}[/tex]
Here, [tex][Pb^{2+}]=S(M)=5.0\times 10^{-5}M[/tex]
So, [tex][IO_{3}^{-}]=2S(M)=(2\times 5.0\times 10^{-5})M=1.0\times 10^{-4}M[/tex]
So, [tex]K_{sp}=(5.0\times 10^{-5})\times (1.0\times 10^{-4})^{2}=5.0\times 10^{-13}[/tex]
Hence option (E) is correct
Answer:
E) 5 x 10-13 Molar
Explanation:
plato
How many grams of solid barium sulfate form when 30.0 mL of 0.160 M barium chloride reacts with 70.0 mL of 0.065 M sodium sulfate? Aqueous sodium chloride forms also.
Answer:
1.06g of BaSO₄ is produced
Explanation:
BaCl₂(aq) + Na₂SO₄(aq) ⇄ 2NaCl(aq) + BaSO₄(aq)
mole BaCl₂ = (0.16M × 0.030L) = 0.0048mole BaCl₂
mole Na₂SO₄ = (0.065M × 0.070L) = 0.00455mole Na₂SO₄
Amount of product BaSO₄ produce from each reagent
BaCl₂ = (0.0048 BaCl₂) × ( 1 mol BaSO₄ / 1mol BaCl₂) × (233.3896g BaSO₄ / 1mol BaSO₄)
= 1.12g BaSO₄
Na₂SO₄ = (0.00455 Na₂SO₄) × ( 1 mol BaSO₄ / 1mol Na₂SO₄) × (233.3896g BaSO₄ / 1mol BaSO₄)
= 1.06g BaSO₄
Final answer:
When 30.0 mL of 0.160 M barium chloride reacts with 70.0 mL of 0.065 M sodium sulfate, 1.06 grams of solid barium sulfate are formed, with sodium sulfate being the limiting reagent.
Explanation:
To calculate the number of grams of solid barium sulfate that form when 30.0 mL of 0.160 M barium chloride reacts with 70.0 mL of 0.065 M sodium sulfate, we need to first determine which reactant is the limiting reagent. This will then allow us to calculate the amount of solid barium sulfate (BaSO₄) produced.
Step 1: Calculate Moles of Reactants
First, we calculate the moles of each reactant:
For barium chloride (BaCl₂): Moles = Volume (L) × Molarity (mol/L) = 0.030 L × 0.160 mol/L = 0.0048 molFor sodium sulfate (Na₂SO₄): Moles = Volume (L) × Molarity (mol/L) = 0.070 L × 0.065 mol/L = 0.00455 molStep 2: Identify the Limiting Reagent
Since the stoichiometry of the reaction between barium chloride and sodium sulfate is 1:1, the limiting reagent is sodium sulfate which has slightly fewer moles.
Step 3: Calculate the Mass of Barium Sulfate
Moles of BaSO₄ produced is equal to the moles of the limiting reagent (sodium sulfate):
Moles of BaSO₄ = 0.00455 molUsing the molar mass of BaSO₄ (233.39 g/mol), we get:Mass of BaSO₄ = Moles × Molar mass = 0.00455 mol × 233.39 g/mol = 1.06 gramsA hot "bubble" of air that breaks away from the warm surface and rises, expanding and cooling as it ascends, is known as a(n) _____. a. low pressure riser b. hot mass c. orographic uplift d. thermal
Answer: Thermal
Explanation: All areas on the earth surface does not absorb equal amount of sunlight, as a result of this, some areas tend to heat up more quickly than the others. The air in contact with these heated areas becomes warmer than its surroundings causing a hot bubble of air called ''thermal'' to break away from the warm surface,rising, expanding and cooling as it ascends, as observed during cloud development.
Final answer:
A rising hot "bubble" of air that expands and cools as it ascends due to convection is known as a thermal. This results in adiabatic cooling, which can lead to condensation and cloud formation.
Explanation:
A hot "bubble" of air that breaks away from the warm surface and rises, expanding and cooling as it ascends, is known as a thermal. This is due to the process of convection where warmer air, being less dense, rises above colder air. As this air rises, it expands due to lower atmospheric pressure at higher altitudes, which in turn causes it to cool, a process known as adiabatic cooling. If the air cools to its dew point, condensation can occur, potentially leading to cloud formation.
The atomic number of an element is:________. 1. the submit answer button. 2. the number of neutrons in the nucleus of one atom. 3. the number of protons in the nucleus of one atom. 4. the total number of particles in the nucleus of one atom. the mass of one atom, in atomic mass units (amu). 5. the number of electrons in the nucleus of one atom
Answer:
The atomic number of an element is: the number of protons in the nucleus of one atom.
Explanation:
The atomic number is a concept related to the structure of the atoms of each element and it is the total number of protons or elementary positive charges, of the nucleus of a certain atom.
Answer:
Option 3==> the number of protons in the nucleus of one atom.
Explanation:
In an atom, atomic number is the number of proton in the nucleus. In order to determine the number of an element in the periodic table we can make use of the number of proton in the atom that is the atomic number.
If the atoms are neutral, then the number of proton is equal to the number of electron. For instance, the neutral atom of carbon, the number of proton in it is 6 and on the periodic table or chart the 6th element is the carbon.
The production of bread and beer both use the process of fermentation. Why do you not get drunk from eating bread like you would from drinking beer?
Explanation:
Yeasts are used to convert glucose without the presence of any oxygen (fermentation).The product formed is Ethanol and carbon dioxide. During fermentation, the release of this product, is the reason why do we want that to happen? For Beer production, we want alcohol (=ethanol) to be formed.For the production of Bread, it’s all because of the evolution of carbon dioxide, carbon dioxide is a gas leavens (modify or transform) the pieces of bread.
But during baking, most of the percentage of alcohol present in the dough used for bread making evaporates. It happens due to the presence of a large amount of water in the dough. And it has been known for a long time that the bread contains residual alcohol of only 1.9% of the total constituents.The reason that we do not feel drunk after eating bread is that a large amount of alcohol is evaporated.The polyatomic ion known as the diphosphate ion is an important intermediate formed in metabolic processes. If the ionic compound calcium diphosphate has the formula Ca 2P 2O 7, which of the following correctly represents the symbol for the diphosphate ion?A) P2O74−
B) P2O714−
C) PO4+
D) P2O72−
E) PO2−
Answer: The symbol of diphosphate ion is [tex]P_2O_7^{4-}[/tex]
Explanation:
An ionic compound is defined as the compound which is formed when electron gets transferred from one atom to another atom.
These are usually formed when a metal reacts with a non-metal or a metal reacts with a polyatomic ion or a reaction between two polyatomic ions takes place.
Calcium diphosphate [tex](Ca_2P_2O_7)[/tex] is formed by the combination of calcium ions [tex](Ca^{2+})[/tex] and diphosphate ions [tex](P_2O_7^{4-})[/tex]
By criss-cross method, the oxidation state of the ions gets exchanged and they form the subscripts of the other ions. This results in the formation of a neutral ionic compound.
Hence, the symbol of diphosphate ion is [tex]P_2O_7^{4-}[/tex]
Final answer:
The correct symbol for the diphosphate ion in calcium diphosphate Ca₂P₂O₇ is P₂O₇₄₋ to balance the positive charge of the two calcium ions, but the response options in the question may contain a typo. D) is correct.
Explanation:
To determine the correct symbol for the diphosphate ion, we need to consider the charge balance in the compound calcium diphosphate with the formula Ca₂P₂O₇. Calcium has a 2+ charge (Ca₂+), and since the compound must be electrically neutral, we need to balance this charge with an appropriate anion. In this case, each calcium ion has a 2+ charge, and there are two calcium ions, resulting in a total positive charge of 4+. Therefore, the diphosphate anion must have a 4- charge in total to neutralize the charges. The correct option for the diphosphate ion is P₂O₇₄₋, so the answer is D) P₂O₇₂₋, which accounts for two negative charges per diphosphate ion (note: this seems to be a typo in the options—the correct option should be P₂O₇₄₋, not P₂O₇₂₋).
What mass of hydrochloric acid (in grams) can 2.7 g of sodium bicarbonate neutralize? (Hint: Begin by writing a balanced equation for the reaction between aqueous sodium bicarbonate and aqueous hydrochloric acid.)
Answer:
1.17 grams of HCl can neutralize 2.7 grams sodium bicarbonate
Explanation:
Step 1: Data given
Mass of sodium bicarbonate = 2.7 grams
Step 2: The balanced equation
HCl + NaHCO3 ⇔ NaCl + H2O + CO2
Step 3: Calculate moles NaHCO3
moles NaHCO3 =2.7 g / 84 g/mol= 0.032 moles
Step 4: Calculate moles HCl
For 1 mol NaHCO3 we need 1 mol HCl
For 0.032 moles NaHCO3 = 0.032 moles HCl
Step 5: Calculate mass HCl
Mass HCl = moles HCl * molar mass HCl
mass HCl = 0.032 * 36.46 g/mol= 1.17 grams
1.17 grams of HCl can neutralize 2.7 grams sodium bicarbonate
The key process being used here is stoichiometry, which is a core aspect of chemistry that studies the quantitative relationships, or ratios, among reactants in a chemical equation. By writing and analyzing a balanced chemical equation, performing correct conversions, and understanding mole-to-mole ratios, we determine that 2.7 grams of sodium bicarbonate can neutralize approximately 1.17 grams of hydrochloric acid.
Explanation:The subject of this specific problem is stoichiometry, a central concept in chemistry. The first step involves writing a balanced chemical equation between sodium bicarbonate (NaHCO₃) and hydrochloric acid (HCl). The equation will look like this: NaHCO₃ (aq) + HCl (aq) → NaCl (aq) + CO₂ (g) + H₂O (l). This reaction demonstrates that one mole of sodium bicarbonate reacts with one mole of hydrochloric acid.
Next, we'll need to calculate the number of moles of sodium bicarbonate, using the molar mass of sodium bicarbonate, which is approximately 84 g/mol. So, 2.7 g of sodium bicarbonate equals 2.7 g / 84 g/mol = 0.0321 mol.
Since the equation shows a 1:1 ratio, this means that 0.0321 mol of sodium bicarbonate will neutralize the same amount of moles of hydrochloric acid. The molar mass of HCl is about 36.5 g/mol, so multiplying this with the moles of HCl gives the mass: 0.0321 mol * 36.5 g/mol = 1.17 g.
So, 2.7 g of sodium bicarbonate can neutralize 1.17 g of hydrochloric acid.
Learn more about Stoichiometry here:https://brainly.com/question/34828728
#SPJ3
Which statement describes a change that occurs during a chemical reaction? A. Atoms in the original substances are arranged in a different way to make new substances. B. The atoms in a substance change their properties so they can become a new substance. C. The atoms in a substance start to move faster until they are no longer touching each other. D. Atoms in the original substances are changed into different atoms to make new substances.
Answer:
A
Explanation:
During a chemical reaction two or more chemical substances interact with one another, causing the atoms to move around and rearrange their arraignment and bond together in a different way to make a new product or products.
Answer:
A
Explanation:
One of the principal laws guiding chemical reactions is the law of conservation of mass. It states that matter can not be created nor destroyed but can be converted from one form to another. Although this has been shown to be wrong to an extent, it is still the basic law guiding the way in which chemical reactions operate.
Now, to form new substances, we have some old substances coming together. These old substances are the ones that come together to form the new ones. Surely, these old substances have their own atoms too. Since they are not destroyed in the process of forming new substances, what will happen is that they are rearranged or converted from their original form to another new form to make way for the emergence of new substance type.
Some reactions result in the production of unstable compounds, also known as ____________ , which have unpaired electrons and are therefore chemically reactive.
Answer:
Free radicals
Explanation:
Oxidative stress occurs when an oxygen molecule splits into single atoms with unpaired electrons, which are called free radicals.
hope this helps :)
Problem Page Question Solid calcium carbonate decomposes into solid calcium oxide and carbon dioxide gas . Write a balanced chemical equation for this reaction.
Answer:
Δ
CaCO3(s) → → CaO (s) + CO2 (g)
Explanation: Calcium Carbonate also known as Limestone will undergo decomposition reaction in the presence of heat to produce Quick-lime and Carbon dioxide.
Answer:
The balanced chemical equation is:
[tex]CaCO_{3}[/tex] → [tex]CaO + CO_{3}[/tex]
Explanation:
The problem said:
Solid calcium carbonate decomposes into solid calcium oxide and carbon dioxide gas.
Corresponde to chemicale equation:
[tex]CaCO_{3}[/tex] → [tex]CaO + CO_{3}[/tex]
A chemical reaction must be based on the law of the conservation of matter, which implies that matter is not created or destroyed but transformed. Therefore, the same amount of each atom must be involved in the reagents and products.
this reaction have:
Reagents.
Ca = 1C = 1O = 3Products.
Ca = 1C = 1O = 3∴ This equation is balanced.
Analyze the bonding and structure of water and isopropanol. determine the type of bonding of each; ionic or covalent, polar or nonpolar. what types of substances are most likely to dissolve in each one?
Answer:
Water is polar covalent while isoporopanol is covalent
Explanation:
Water contains polar covalent bonds. Water has a high dipole moment and thus dissolves ionic substances easily such as sodium chloride. Water is also a good electrolyte. Water is not volatile. Water molecules are held together by hydrogen bonds. Isopropanol is a covalent compound. It is non polar and suitable for dissolving non polar substances such as campohor. It is volatile but dissolves in water due the the -OH group present in the molecule.
Final answer:
Water has polar covalent bonds and engages in hydrogen bonding, making it a great solvent for ionic and polar substances. Isopropanol also has a polar covalent bond within its hydroxyl group but contains a nonpolar carbon structure, allowing it to dissolve both polar and some nonpolar substances.
Explanation:
Bonding and Structure of Water and Isopropanol
Water (H2O) displays polar covalent bonds due to the electronegativity difference between oxygen and hydrogen atoms. This polarity allows water molecules to engage in hydrogen bonding, a strong type of dipole-dipole interaction that occurs between the positive end of one water molecule and the negative end of another. Because of this polar nature and hydrogen bonding, water is an excellent solvent for ionic compounds and other polar substances, as it can solvate ions and other polar molecules effectively.
Isopropanol (C3H8O) has a similar polar covalent bond structure within its hydroxyl (-OH) group, which allows for hydrogen bonding. However, its larger carbon-containing structure (hydrocarbon part) imparts some nonpolar character to the molecule, making it capable of dissolving both polar substances and some nonpolar substances. Hence, isopropanol is regarded as an intermediate-case solvent.
Nonpolar substances generally do not dissolve well in polar solvents like water. Conversely, substances like salts and macromolecules that form ionic or polar covalent bonds do dissolve in water due to the similar nature of intermolecular interactions. Isopropanol, with its dual nature, can dissolve a variety of substances, from polar to moderately nonpolar.
Consider the following system at equilibrium:D(aq)+E(aq)<=>F(aq)Classify each of the following actions by whether it causes a leftward shift, a rightward shift, or no shift in the direction of the net reaction.Increase DIncrease EIncrease FDecrease DDecrease EDecrease FTriple D and reduce E to one thirdTriple both E and F
Explanation:
D(aq) + E(aq) <=> F(aq)
This question is based on Le Chatelier's principle.
Le Chatelier's principle is an observation about chemical equilibria of reactions. It states that changes in the temperature, pressure, volume, or concentration of a system will result in predictable and opposing changes in the system in order to achieve a new equilibrium state.
Increase D
D is a reactant. if we add reactants to the system, equilibrium will be shifted to the right to in order to maintain equilibrium by producing more products.
Increase E
E is a reactant. if we add reactants to the system, equilibrium will be shifted to the right to in order to maintain equilibrium by producing more products.
Increase F
F is a product. If we add additional product to a system, the equilibrium will shift to the left, in order to produce more reactants. The reaction would shift to the left.
Decrease D
if we remove reactants from the system, equilibrium will be shifted to the left.
Decrease E
if we remove reactants from the system, equilibrium will be shifted to the left.
Decrease F
if we remove products from the system, equilibrium will be shifted to the right to in order to maintain equilibrium by producing more products.
Triple D and reduce E to one third
no shift in the direction of the net reaction, Both changes cancels each other.
Triple both E and F
no shift in the direction of the net reaction, Both changes cancels each other.
The gas acetylene burns according to the equation: 2 C2H2 + 5 O2 ----------> 2H2 + 4 CO2 If you have a 10.0 L tank of acetylene at 25.0 C and 1.00 atm, how many moles of CO2 will be produced if you burn all the acetylene in the tank?
Answer:
The answer to your question is 0.82 moles of CO₂
Explanation:
Data
V = 10L
T = 25°C
P = 1 atm
moles = n = ?
R = 0.08205 atm L/mol°K
Process
1.- Convert °C to °K
T = 25 + 273 = 298°K
2.- Use the ideal gas law to find the moles of Acetylene
PV = nRT
Solve for n
n = PV / RT
Substitution
n = (1)(10) / (0.08205)(298)
Simplification
n = 10 / 24.45
Result
n = 0.409 moles of Acetylene
3.- Use proportions to find the moles of CO₂
2 moles of C₂H₂ ------------------- 4 moles of CO₂
0.409 moles ------------------- x
x = (0.409 x 4) / 2
x = 1.636 / 2
x = 0.82 moles of CO₂
Select the correct answer from each drop-down menu. The service sector in Jessica's economy is dominant. Which sector is dominating Jessica's country? Jessica lives in a primarytertiarysecondary sector economy. ManufacturingFishingHospitality could be one of the most important occupation in Jessica's economy
Answer:
The services sector dominates the country's economy
Jessica lives in a Tertiary sector economy
Hospitality could be most important occupation
Explanation:
The services sector is the tertiary sector of the economy.
Manufacturing is categorized as secondary sector and fishing is primary sector since it is refers to raw materials obtained.
Answer:.......
Service sectors in jessica's country is dominating their economy.
The tertiary sector is dominating jessica's country.
Hospitality is one of the most important jobs in jessica's country.
Explanation:.......
Services sector is also known as tertiary sector in an economy.There are various sectors of an economy, there is primary sector, manufacturing sector also known as secondary sector and tertiary sector also known as service sector.
The Dew Point... a. is the same as temperature when the relative humidity is 100%. b. can only be given in Kelvin degrees. c. is the temperature of the air when it completely dries out. d. is high when there is little water vapor in the air.
Answer:
Option (A)
Explanation:
The dew point refers to the temperature at which the amount of water vapor present in the air is so high that the relative humidity becomes 100%, and with the increasing rate of cooling, the condensation process takes place and dew is formed.
So for dew point to occur, the air temperature must reach a condition where the air is fully saturated or the relative humidity is 100%.
Thus, the correct answer is option (A).
The dew point should be an option a.
What is dew's point ?It defined the temperature at which the water vapor amount should be present in the air is so more due to this the relative humidity becomes 100%, and with the increasing rate of cooling, the condensation process takes place and dew is created.
Learn more about temperature here: https://brainly.com/question/12883307
A stoichiometric compound Fe3C is also known as and forms when the solubility of carbon in solid iron is exceeded. The lamellar structure of α and Fe3C that develops in the iron-carbon system is called .
Answer:
Cementite, Pearlite
A stoichiometric compound Fe3C is also known as CEMENTITE and forms when the solubility of carbon in solid iron is exceeded. The lamellar structure of α and Fe3C that develops in the iron-carbon system is called PEARLITE
Explanation:
A Cementite is a brittle compound that is made of iron and carbon. The weight of a cemientite is 6.67% of carbon and 93.3% of iron.
The stoichiometry of the Cementite is M₃C, where Fe is represented by M.
The Pearlite, known for its toughness; can be used in a several applications, such as: Cutting tools. High-strength wires.
It is a two-phased, lamellar (or layered) structure composed of alternating layers of ferrite (87.5 wt%) and cementite (12.5 wt%) that occurs in some steels and cast irons.
Convert 6mol NO2 into grams Convert 800 grams of LiO into moles! Convert 4500 grams of SO2 into molecules! Convert 30 mol H2O into grams! Convert 8mol CO into grams!
Answer:
1. 276 g of NO₂
2. 34.8 moles of LiO
3. 4.23×10²⁵ molecules of SO₂
4. 540 g of H₂O
5. 224 g CO
Explanation:
Let's define the molar mass of the compound to define the moles or the grans of each.
Molar mass . moles = Mass
Mass (g) / Molar mass = Moles
1. 6 mol . 46 g / 1 mol = 276 g of NO₂
2. 800 g . 1mol / 22.94 g = 34.8 moles of LiO
3. To determine the number of molecules, we convert the mass to moles and then, we use the NA (1 mol contains 6.02×10²³ molecules)
4500 g . 1mol / 64.06 g = 70.2 moles of SO₂
70.2 mol . 6.02×10²³ molecules / 1 mol = 4.23×10²⁵ molecules of SO₂
4. 30 mol . 18g / 1 mol = 540 g of H₂O
5. 8 mol . 28g / 1mol = 224 g CO
" Speak of me as I am; nothing extenuate, nor set down aught in malice: A. then must you speak of one that loved not wisely but too well; B. Of one not easily jealous, but being wrought perplexed in the extreme
As the question is not included in this passage, I will provide a general explanation of what the passage means.
This passage illustrates the regret that Othello argues he feels over the death of his wife. Othello suffocated his wife Desdemona, who was completely innoceent, because of his blind jealousy. Upon his recovery from such impulsive actions, Othello laments his acts, and says that, even though he did not "love her wisely" he loved her "too well."
A chemist needs to know the concentration of some KOH that is in the laboratory. To find this out, the chemist titrates a 50.0 mL sample of the solution with 2.5 M HCl. If it takes 14.7 mL of the HCl to reach the titration endpoint, what is the concentration of the KOH solution
Answer:
0.735M
Explanation:
The balanced equation of reaction is:
HCl + KOH ===> KCl + H2O
Using titration equation of formula
CAVA/CBVB = NA/NB
Where NA is the number of mole of acid = 1 (from the balanced equation of reaction)
NB is the number of mole of base = 1 (from the balanced equation of reaction)
CA is the concentration of acid = 2.5M
CB is the concentration of base = to be calculated
VA is the volume of acid = 14.7mL
VB is the volume of base = 50mL
Substituting
2.5×14.7/CB×50 = 1/1
Therefore CB =2.5×50×1/14.7×1
CB= 0.735M
A container filled with 2.46 kg of water underwent a temperature change from 25.24 °C to 27.31 °C. How much heat, measured in kilojoules, did the water absorb?
Answer:
The correct answer is 21.3 J
Explanation:
The heat absorbed by water can be calculated by using the following equation:
heat= m x Sh x ΔT
Where m is the mass of water (2.46 kg= 2460 g), Sh is the specific heat capacity of water (4.18 J/g.ºC) and ΔT is the difference of temperatures (final T - initial T). We introduce this values and calculate the heat:
heat=2460 g x 4.18 J/g.ºC x (27.31ºC - 25.24ºC)
heat= 21,285.39 J
As 1 KJ= 1000 J, we must divide the answer into 1000 to obtain the heat in KJ:
21,285.39 J x 1 KJ/1000 J= 21.28 KJ≅ 21.3 KJ
Final answer:
To calculate the heat absorbed by the water, first convert the mass to grams, then find the temperature change, apply the specific heat formula, and finally convert the energy to kilojoules. The water absorbed 21.27 kJ of heat.
Explanation:
The student's question revolves around calculating the amount of heat absorbed by water when its temperature is increased. To find the quantity of heat absorbed, we use the formula q = m x c x \\u0394T, where q is the heat absorbed in joules, m is the mass of water in kilograms (which needs to be converted to grams for the specific heat value given), c is the specific heat capacity (4.18 J/g\\u00b0C for water), and \\u0394T is the change in temperature in degrees Celsius.
To solve the problem:
Convert the mass of water to grams: 2.46 kg x 1000 g/kg = 2460 g
Calculate the change in temperature: 27.31 \\u00b0C - 25.24 \\u00b0C = 2.07 \\u00b0C
Apply the formula: q = 2460 g x 4.18 J/g\\u00b0C x 2.07 \\u00b0C = 21270.44 J
Convert joules to kilojoules: 21270.44 J / 1000 = 21.27 kJ
Therefore, the water absorbed 21.27 kJ of heat.
You will be adding a solution containing potassium carbonate to a solution containing hydrochloric acid. What risk is associated with this?
Explanation:
The reaction of potassium carbonate with hydrochloric acid is as follow -
Potassium Carbonate + Hydrochloric acid → Potassium Chloride + Water + Carbon Dioxide.
In the above reaction , the metal carbonate reacts with an acid to give salt , water and carbon dioxide .
The reaction is an exothermic reaction , as the release of carbon dioxide , is indicated by vigorous effervescence .
Hence ,
The temperature of the reaction increases a lot and hence the reaction is very dangerous .
Therefore , the reaction is very risky to perform.
When potassium carbonate is mixed with hydrochloric acid, it will result in a reaction that produces potassium chloride, water, and carbon dioxide. The release of CO2 gas can cause fizzing which poses the risk of overflow, and hydrochloric acid's corrosive nature requires careful handling and protective gear.
When a solution containing potassium carbonate is added to a solution containing hydrochloric acid, a chemical reaction will occur. This reaction is an acid-base reaction where potassium carbonate will react with hydrochloric acid to produce potassium chloride, water, and carbon dioxide (CO2). The associated risks include the potential release of CO2 gas, which could cause the solution to fizz and possibly overflow if not mixed carefully.
It is important to always control the rate at which reactants are mixed to avoid vigorous reactions. Additionally, proper laboratory techniques should be followed to mitigate the risk of spills and contact with skin or eyes, as hydrochloric acid is corrosive. Wearing proper safety equipment, such as goggles and gloves, is essential.
Calculate the concentration of the solution in units of g/dm3:
10.0 g of sodium chloride dissolved in 2.00 dm3 of water
Answer:
5 g/dm³ is the correct answer
Explanation:
Concentration in units of g/dm³ means the grams of solute, in 1 dm³ of solution.
We can make a rule of three:
In 2 dm³ of solution we have 10 g of NaCl
Therefore, 1 dm³ of solution we would have (1dm³ . 10g) / 2dm³ = 5g
If we were asked for concentration of g/dm³ we can also make this division:
10 g / 2dm³ = 5g/dm³
The 10.0 g of NaCl in 2.00 dm³ of water results in a concentration of 5.0 g/dm³.
To find the concentration of the solution in units of g/dm³, use the formula:
Concentration (g/dm³) = Mass of solute (g) / Volume of solution (dm³)Given:
Mass of sodium chloride (NaCl) = 10.0 gVolume of water = 2.00 dm³Now, plug in the values:
Concentration = 10.0 g / 2.00 dm³ = 5.0 g/dm³Therefore, the concentration of the sodium chloride solution is 5.0 g/dm³.
#SPJ11