the answer is very clearly C.
a common example is scissors
Answer:
The correct option is: A machine is classified as a compound machine if it C. is made up of two or more simple machines that operate together.
Explanation:
Composite machines are mechanical devices that have been formed from two or more simpler machines which are connected in series. In this way, when one of these parts of the composite machine is activated, the rest work in a coordinated manner, being able to offer together a function that individually could not.
Composite machines have operators that work in coordination. These operators can be:
Mechanical operators : They are the elements that allow the operation of the machine turning the force into movement. This set is what is called a mechanism. Energy operators: are responsible for storing energy or force and transform it into another type so that the device can be activated and perform its function.In short, the correct option is: A machine is classified as a compound machine if it C. is made up of two or more simple machines that operate together.
Heat transfer from the Sun to the Moon is mostly through the process of *
Radiation
Radioactivity
Conduction
Refraction
Convection
radiation since the suns rays are ultraviolet which is a form of radiation
Heat transfer from the Sun to the Moon is mostly through the process of Radiation.
Explanation:
In space, the heat is being transferred through the process of radiation. There is no atmosphere in the moon so it will get heat or cool by the process of conduction or convection.
In space, heat gets transferred by radiation which mainly takes place in the infrared band of electromagnetic waves. Radiation can transmit heat by the electromagnetic wave. It can take the heat transfer process in the vacuum.
Which of the following has to happen before the eardrum begins to vibrate with the same frequency as the source of the sound waves? A. Vibrations have to be transmitted to the fibers of the auditory nerve. B. Impulses have to be sent to the brain through the auditory nerve. C. The outer ear has to collect the sound waves and lead them to the middle ear. D. The brain has to interpret the direction from which the sounds are being delivered.
Answer:
C. The outer ear has to collect the sound waves and lead them to the middle ear.
Explanation:
In the process of hearing, the first thing that happens is that sound waves enter the outer ear through a passage called "auditory canal" that reaches the eardrum.
The movement of the incoming sound waves causes the eardrum to vibrate and transmit these vibrations to three tiny bones of the middle ear.
Answer: i think its c
why did scientist reject Lamarck's idea of evolution?
A. Organisms have not changed through earths history.
B. Organisms cannot change their characteristics during their life time.
C. Traits acquired during a lifetime are not passed through offspring.
D. Traits acquired during a lifetime are of no use to an individual.
Explanation:
Lamarck's theory of evolution, also called as theory of inheritance of acquired traits was rejected because he suggested that the acquired characteristics which an organisms acquires through its life experiences are transferred to its next generation, which is not possible since acquired characters does not bring any change to an individuals set of genes.
Answer: Traits acquired during a lifetime are not passed through offspring. (C.)
Kinetic energy and mass are
proportional.
kinetic energy and mass are dieectly proportional
Answer:
Kinetic energy and mass are directly proportional to each other
Explanation:
As we know by the formula of kinetic energy
[tex]KE = \frac{1}{2}mv^2[/tex]
now we know that
kinetic energy depends on the mass of object and it is product of mass and square of the speed.
Here we can say that if mass is doubled then kinetic energy also get double and if mass is decreased then kinetic energy also decreases
This type of relationship is known as direct relationship and here since it shows direct relationship so correct answer will be
Kinetic energy and mass are directly proportional to each other
An X-ray tube emits X-rays with a wavelength of 1.0 X 10^-11 m. Determine the energy, in electron volts, possessed by the incident electrons
Answer:
[tex]1.25\cdot 10^5 eV[/tex]
Explanation:
The energy of the incident electron is equal to the energy acquired by the X-rays photon emitted by the tube, which is given by
[tex]E=\frac{hc}{\lambda}[/tex]
where
h is the Planck constant
c is the speed of light
[tex]\lambda[/tex] is the wavelength
In this problem, the wavelength of the photon is
[tex]\lambda=1.0\cdot 10^{-11} m[/tex]
Therefore, the energy is
[tex]E=\frac{(6.63\cdot 10^{-34} Js)(3\cdot 10^8 m/s)}{1.0\cdot 10^{-11} m}=2.0\cdot 10^{-14} J[/tex]
And keeping in mind that
[tex]1 eV = 1.6\cdot 10^{-19} J[/tex]
We find the energy in electron volts:
[tex]E=\frac{2.0\cdot 10^{-14}J}{1.6\cdot 10^{-19} J/eV}=1.25\cdot 10^5 eV[/tex]
A student dropped some nails into a trash can half filled with wood shavings. Which way to seperate the mxture of nails and shavings?
A. Sifting
B. Flotation
C. Evaporation
D. Using Filter
Answer:
A. Sifting since the wood shavings are small enough to fall through the sift but nails are not.
From that particular list of choices, Flotation is the best. (B) Fill the trash can with water and stir it up. The nails will sink to the bottom, and the wood shavings will float on top, and you can skim them off.
But then what have you got ? You've got wet nails that'll rust if you don't dry them off in a hurry, and you've got a sticky wet pile of soggy wood shavings.
Can I suggest a better way to separate them ? Dump everything out on the ground, and pass a humongous magnet over it. The wood shavings will just lay there, but the nails will jump out and stick to the magnet. And everything will stay dry.
What is the length of the hypotenuse of a right triangle, whose legs have lengths of 12 meters and 35 meters?
Answer:
c
Explanation:
Which conditions are necessary for clouds to form?
Final answer:
Clouds form when water vapor condenses into tiny droplets that aggregate around small particles or nuclei and then fall as precipitation.
Explanation:
Clouds form under specific conditions. The necessary conditions for clouds to form include:
Rising air currents that carry water vapor into the atmosphereThe cooling of water vapor as it rises, causing it to condense into tiny droplets of liquid waterThe droplets reaching a certain size and aggregating around small particles or nucleiIf the droplets become large enough, they fall as precipitation, such as rain, snow, or hailThese processes are part of the water cycle, where water evaporates from the ocean, condenses in the atmosphere, and eventually falls back to the Earth as precipitation.
How do you sound waves transfer energy
In electromagnetic waves, energy is transferred through vibrations of electric and magnetic fields. In sound waves, energy is transferred through vibration of air particles or particles of a solid through which the sound travels. In water waves, energy is transferred through the vibration of the water particles.
MARK ME BRAINLIEST PLEASE!!!!
Answer:
Sound waves transfer energy by causing successive compressions and rarefactions in the particles of the medium without transporting the medium particles themselves.
Explanation:
Sound in solids can also manifest as transverse waves, causing crests and troughs in the propagation medium. Waves can be characterized by two basic parameters: amplitude and frequency. Focusing on a single point vibrating in a medium excited by a sound wave, amplitude is the maximum distance traveled by the vibrating point relative to its rest position. Taking a snapshot of a propagating sound wave at any instance shows consecutive compressions and rarefactions, regions in which the medium material is compressed together and spread widely apart, respectively. The distance between the centers of two successive compressions or rarefactions is the wavelength of the wave. The frequency is the inverse of the wavelength, so the larger the frequency, the smaller the wavelength. Having a higher frequency makes the wave have a larger number of more closely-grouped compressions and rarefactions as it propagates. As the amplitude and frequency of the wave increase, the energy transferred by the propagation of the wave also increases. Extremely short but low-amplitude ultrasonic waves can be used to heat polymer materials and weld them together.
what happens when you "crack/pop your knuckles?
It could result in it not being good for your joints, as well as in the long run but shouldn't cause problems when your a child. I hope this helps your question!
is a brick an alloy or ceramic
Answer:
Its a ceramic
Explanation:
Brick does not contain any metal so it couldnt be an alloy.
Answer:
Brick is a ceramic
Explanation:
Alloy is a metal made up by combining two or more metallic elements. for example, bronze is made up by alloying tin with copper. Ceramic materials is an inorganic,non metallic which is often crystalline oxide,nitride or carbide material. For example, Tiles are made up of natural clay sand and water.
PLEASE MARK BRAINLIEST
it takes a school bus full of kids longer to stop than it does a small car with a single passenger. which law is this an example o?
Newton´s second law of motion
Final answer:
The reason a school bus full of kids takes longer to stop than a small car can be attributed to Newton's Second Law of Motion and the fact that kinetic energy increases with the square of the speed, requiring more work to stop a more massive vehicle like a school bus.
Explanation:
The phenomenon where a school bus full of kids takes longer to stop than a small car can be explained by Newton's Second Law of Motion, which states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass. The more mass an object has, like a school bus with children, the more force is needed for it to change its state of motion. When stopping, the required force translates to the braking force, which must overcome the kinetic energy of the vehicle. Since kinetic energy increases with the square of the speed, and because a school bus has a greater mass, it has significantly more kinetic energy than a small car at the same speed. This results in a longer stopping distance for the school bus, as the brakes need to do more work to reduce its kinetic energy to zero.
The force of air particles over an area is A.) temperature B.) pressure C.) Volume D.) Kelvins
Answer:The anwser is B i Promise ok
Explanation:
Answer: B
Explanation: I just did it.
Which choice describes how energy is transferred at the particle level through the process of conduction?
A. The fast-moving particles in the colder material collide with the slow-moving particles in the hotter object. The collisions transfer energy from the fast-moving particles to the slow-moving particles, increasing their speed and thermal energy.
B. The fast-moving particles in the hotter material collide with the slow-moving particles in the colder object. The collisions transfer energy from the fast-moving particles to the slow-moving particles, increasing their speed and thermal energy.
C. The fast-moving particles in the colder material move into the hotter material. The slow-moving particles in the hotter material move into the colder material. The two materials switch temperatures.
D. The fast-moving particles in the hotter material move into the colder material. The slow-moving particles in the colder material move into the hotter material. The two materials switch temperatures.
The answer is B. Because the two materials will not switch temperature, heat is only transferred from a hotter material to a colder material to achieve equilibrium in temperature. Thus, option C and D is out. Option A is also wrong because the faster moving particles should be in the hotter material not the colder material, this is because when the material is hot, the kinetic energy of the particles increase, causing it to move faster.
On the decibel scale, an increase of 10 decibels means an intensity increase of __________times?
Answer:
10
Explanation:
The decibel or decibel, is a unit that relates two values of sound pressure, and electrical power. the base unit is the bel, but given the amplitude but for practicality, a submultiple, the decibel, is used. It is a scalar expression .
Zero belios is the reference value used as a base, hence a bel is equivalent to 10 decibels and means that there is a power increase of 10 times over the reference value.
does anyone know this???
Answer:
C
Explanation:
which part of the ear receives the signal from the eardrum?
The ossicles, a trio of tiny bones in the middle ear, receive sound vibrations from the eardrum and transfer them to the cochlea, which then converts them into electrical signals for the brain.
The part of the ear that receives the signal from the eardrum is the ossicles in the middle ear. Once the eardrum, or tympanic membrane, vibrates in response to sound waves, it transfers these vibrations to the ossicles. These three tiny bones - the malleus (hammer), incus (anvil), and stapes (stirrup) - act as a lever system, amplifying the sound vibrations and transmitting them to the cochlea in the inner ear. Inside the cochlea, the mechanical vibrations are converted into electrical signals by hair cells, and these signals are then transmitted to the brain via the auditory nerve.
a tennis ball has a mass of 57.5 g, how much does it weigh? (do a conversion)
Answer:
0.1267658 pounds
0.0575kg
Explanation:
You were not specific at to which measurement you would have liked me to convert it to. I assume it would be in kilograms since that is the measurement used in science for weight. I have added pounds as well in case you were looking for an alternative weight.
Which of the following is the best definition of light energy?
A.
The energy that travels as longitudinal pressure waves.
B.
The form of energy that travels as electromagnetic waves.
C.
The form of energy associated with the random motion of atoms or molecules within a substance.
D.
Energy that is stored in an object due to its position or configuration.
Answer:
B.
The form of energy that travels as electromagnetic waves.
Explanation:
Light energy, or electromagnetic field energy, is the form of energy that travels as electromagnetic waves. These waves do not need a medium through with to travel, so they are able to travel through the vacuum of outer space. Some types of light can be sensed by the human eye.
The best definition given is B: light energy is the form of energy that travels as electromagnetic waves, and this form of energy includes both wavelike behavior and particle-like characteristics as photons.
Explanation:The best definition of light energy among the given options is B. The form of energy that travels as electromagnetic waves.
Light energy is a form of electromagnetic radiation that moves through a vacuum at a constant speed of approximately 3 × 108 meters per second. This radiation exhibits wavelike behavior, which includes a frequency (v) and a wavelength (λ), adhering to the equation c = λv, where c represents the speed of light. Additionally, light can be described as a stream of particles called photons, capturing the dual nature of electromagnetic radiation as both waves and particles, a concept referred to as wave-particle duality.
Light energy is best defined as the form of energy that travels as electromagnetic waves. Light is an example of a transverse wave, where the oscillations occur in the electric and magnetic fields perpendicular to the direction of motion. It exhibits both wave-like and particle-like behavior, known as wave-particle duality, and can be described as a stream of particles called photons, with energy related to the frequency or wavelength of the light.
metal cutters have long handles. why
Explanation:
To provide the leverage needed to produce enough force to overcome what you're trying to cut.
A power plant needs to slow down the fission reactions in its nuclear reactor. In which direction should the uranium-containing rods in the diagram be moved?
A)Left
B)right
C)up
D)down
Answer:
D. Down
Explanation:
The uranium-containing rods in the diagram should be moved down in order to slow down the fission reactions in its nuclear reactor.
What is nuclear fission?Nuclear fission is the process of splitting the nucleus of heavier atoms to produce two or more atoms of lighter nucleus with the release of large amounts of energy.
In order to slow down the fission reactions in its nuclear reactor, neutron absorbers are introduced and the uranium-containing rods are removed from the nuclear reactor.
Therefore, the uranium-containing rods in the diagram should be moved down in order to slow down the fission reactions in its nuclear reactor.
Learn more about nuclear fission at: https://brainly.com/question/3992688
#SPJ2
calculate the electrical energy consumed by 1200 W toaster in 30 min
Electrical energy = Power x time.
30 minutes = 0.5 hours.
Electical energy = 1200W x 0.5 hours = 600W/hour = 0.6kWh
A baseball with a mass of 300 g has a kinetic energy of 304 J. Calculate the speed of the baseball
The formula for kinetic energy is equal to 1/2mv^2, where "m" is the mass of the object (in kilograms) and "v" is equal to the velocity of the object (in meters per second). To calculate the speed, simply plug in the values and solve.
KE = 0.5mv^2
304 J = 0.5(0.3 kg)v^2 -mass converted from grams to kilograms
v = 45.02 m/s
The baseball is travelling about 45.02 meters per second.
Hope this helps!
The speed of the baseball is 45.02 metres per seconds square.
Given the following data;
Mass = 300 grams Kinetic energy = 304 JoulesConversion:
1000 grams = 1 kilogram
300 grams = X kilograms
Cross-multiplying, we have;
X × [tex]1000[/tex] = [tex]300[/tex]
X = [tex]\frac{300}{1000} = 0.3[/tex] kilograms.
To find the speed of the baseball;
Kinetic energy can be defined as an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex]K.E = \frac{1}{2}MV^2[/tex]
Where;
K.E represents kinetic energy measured in Joules. M represents mass measured in kilograms. V represents speed measured in metres per seconds square.Substituting the values into the formula, we have;
[tex]304 = \frac{1}{2}[/tex] × [tex]0.3[/tex] × [tex]V^{2}[/tex]
[tex]608 =[/tex] [tex]0.3[/tex] × [tex]V^{2}[/tex]
Dividing both sides by 0.3, we have;
[tex]V^{2} = \frac{608}{0.3}\\\\V^{2} = 2026.67[/tex]
Taking the square root of both sides, we have;
[tex]V = \sqrt{2026.67}[/tex]
V = 45.02 metres per seconds square.
Therefore, the speed of the baseball is 45.02 metres per seconds square.
Find more information: https://brainly.com/question/18479892
Unlike velocity, speed is scalar, which means it is described by only.
There are two qualities that can describe most variables - direction and magnitude. A vector possesses both a direction and magnitude, while a scalar possesses only a magnitude.
Hope this helps!
Answer:
It can be described on by its magnitude
MAGNITUDE
Explanation:
Vector quantities are described by their magnitude and their direction both
so all vector quantities like velocity etc need direction and magnitude both like velocity is given as 60 km/h towards North direction
But for scalar quantities we defined them only by their magnitudes
Like here if we define mass then we do not require any direction for its complete explanation.
so here correct answer will be
MAGNITUDE
Which of the following chemical reactions expressed correctly the role of the catalyst in the reaction?
Answer:
d
Explanation:
because i know
Answer:
Explanation:
D
A catalyst starts out with the reactants and winds up with the products. It does not take any part of the reaction. It just lowers the activation energy (usually) making it easier to get from the left side of the equation to the right side.
B is the second best answer, and had you not chosen B and gotten wrong, I think I would have agreed with you.
What does the diagram represent?
Answer:
this is a diagram illustrating the valance electrons on an oxygen atom
The diagram represents an oxygen atom Option A
An oxygen atom is a chemical element represented by the symbol "O" on the periodic table. It is classified as a non-metal and has an atomic number of 8, indicating the number of protons in its nucleus. The most common isotope of oxygen, found in nature, is oxygen-16, meaning it has 8 protons and 8 neutrons.
Oxygen is essential for life and is a crucial component of many compounds, including water (H2O) and various organic molecules. It plays a vital role in cellular respiration, the process by which living organisms extract energy from nutrients.
The electron configuration of an oxygen atom is 1s² 2s² 2p⁴, indicating the distribution of its eight electrons in different energy levels and orbitals.
Oxygen atoms tend to form covalent bonds with other atoms, sharing electrons to achieve a stable configuration. Molecular oxygen (O2) is a diatomic molecule, consisting of two oxygen atoms bonded together.
In a longitudinal wave, particle displacement is
perpendicular to the direction of wave motion
parallel to the direction of wave motion
opposite to the direction of wave motion
above the direction of wave motion
In a longitudinal wave, particle displacement is parallel to the direction of wave motion.
(In a transverse wave, particle displacement is perpendicular to the direction of wave motion .)
Answer:
it is B
Explanation:
Simple question please help! A ball is thrown 19.0 m/s at an angle of 40.0º with the horizontal. Assume the ball is thrown at ground level 22.0 meters away. a. How long does it take the ball to reach the wall? b. At what height does the ball hit the wall?
a. 1.51 s
In this part of the problem, we are only interested in the horizontal motion of the ball. Along the horizontal direction, the motion of the ball is a uniform motion with constant velocity, which is equal to the horizontal component of the initial velocity:
[tex]v_x = v_0 cos \theta = (19.0 m/s)(cos 40^{\circ})=14.6 m/s[/tex]
So, the ball travels horizontally at a speed of 14.6 m/s; in order to cover the distance of d = 22.0 m that separates it from the wall, the time need is
[tex]t=\frac{d}{v_x}=\frac{22.0 m}{14.6 m/s}=1.51 s[/tex]
b. 7.25 m
We now know that the ball takes 1.51 s to hit the wall, 22.0 away. Now we have to analyze the vertical motion of the ball, which is an accelerated motion with constant acceleration g =9.8 m/s^2 towards the ground (acceleration due to gravity).
The initial vertical velocity is
[tex]v_{y0}=v_0 sin \theta=(19.0 m/s)(sin 40^{\circ})=12.2 m/s[/tex]
The vertical position of the ball at time t is given by the equation
[tex]y(t)=v_{0y} t -\frac{1}{2}gt^2[/tex]
We know that the ball hits the wall at t=1.51 s, so if we substitute this value into the previous formula, we find at what height y the ball hits the wall:
[tex]y(1.51 s)=(12.2 m/s)(1.51 s)-\frac{1}{2}(9.8 m/s^2)(1.51 s)^2=7.25 m[/tex]
A satellite orbits the Earth at constant speed. Is this an unbalanced or balanced force?
Answer:
An unbalanced force is one that causes a change in the motion of the object to which the force is applied. An object at rest or an object in steady motion continues at rest or in unchanged motion unless it is subjected to an unbalanced force.
Balance forces are two forces acting in opposite directions on an object, and equal in size. Anytime there is a balanced force on an object, the object stays still or continues moving continues to move at the same speed and in the same direction.
Explanation:
A satellite orbiting Earth at constant speed would be considered an unbalanced force because it is an object in steady motion and it will remain in steady motion unless it is subjected to an unbalanced force.
Answer:
An unbalanced force is one that causes a change in the motion of the object to which the force is applied. An object at rest or an object in steady motion continues at rest or in unchanged motion unless it is subjected to an unbalanced force.
Explanation:
What can cause the loss of soil that is not protected by plant cover?
Loss of soil not protected by plant cover can be caused by erosion, pollution, and overuse/improper farming practices.
Explanation:Loss of soil that is not protected by plant cover can be caused by various factors:
Erosion: Without plant cover to hold the soil in place, wind and water can easily carry away the top layer of soil, causing erosion.Pollution: Chemicals and pollutants can leach into the soil, making it less fertile and unsuitable for plant growth.Overuse and improper farming practices: Continuous farming on the same land without proper crop rotation or allowing the land to rest can deplete the nutrients in the soil, leading to its loss.Learn more about Causes of soil loss here:https://brainly.com/question/12535915
#SPJ3