A construction worker drags a box across the floor. If the frictional force between the floor and the box is 12.2 newtons, how much work does friction do as the box moves 11.5 meters?

The answer is B. metalloids

(boron, silicon, germanium, arsenic, antimony, tellurium, astatine, and polonium)

Final answer:

Elements along the stair step line of the periodic table are metalloids, with properties between those of metals and nonmetals. Metals are to the left and are conductive and malleable, while nonmetals are to the right and are typically poor conductors. Atomic radii decrease across a period and increase down a group. Option b

Explanation:

Elements that lie along the stair step line of the periodic table are known as metalloids. These elements exhibit properties that are intermediate between those of metals and nonmetals. Metals are typically found to the left of the metalloids, and they are generally malleable, shiny, and good conductors of heat and electricity.

On the other hand, nonmetals are located to the right of the metalloids and typically have opposite properties, such as being poor conductors of heat and electricity. The atomic radii of elements tend to decrease from left to right across a period because of the increasing positive charge in the nucleus, which pulls electrons closer. In contrast, atomic radii generally increase as you move down a group due to the addition of energy levels.

Since she is testing where the plant would grow best, the type, height and amount of water does not help the original question. Only moving the plants will help her determine where to plant the basil plants. Option B. the location of the plants

Answer: C. the height of the plants

Explanation:

Increase

Explanation:

Naomi increasing the pressure on a solution of liquid and gas in a closed container will increase the amount of gas held in her solution.

Increase in pressure increases the solubility of gases in a solution.

learn more:

Molecular theory https://brainly.com/question/12362857

#learnwithBrainly

Increasing the pressure on a solution of liquid and gas in a closed container will increase the amount of gas held in the solution.

Increasing the pressure on a solution of liquid and gas in a closed container will increase the amount of gas held in the solution. This is because an increase in pressure will result in more collisions between gas particles and the container walls, leading to a greater force being exerted on the walls. As a result, the pressure inside the container increases.

Explanation:

The initial speed of train = 24 km/hr = 24 x 1000/3600 = 20/3 m/sec

The final speed of train =  8 km/hr = 8 x 1000/3600 = 20/9 m/sec

The relation of motion

v = u + a x t

final velocity = initial velocity + acceleration x time

20/9 = 20/3 - 2 x t   where t is time

Because the acceleration is negative

2 t =  20/3 - 20/9 = 40/9   or  t = 20/9 sec = 2.2 sec

The time taken to decrease the speed from 24 km/hr to 8 km/hr is 2.2 sec approx

Answer:

Explanation:

Your description corresponds to the picture attached.

In that model, the spheres represent atoms or molecules (is the same) of a substace. You can call them particles.

The particles tightly packed inside the cylinder of the left represent a substance in solid state whose particles are in a fix position and cannot move freely.

The particles randomly distributed throughout the cylinder on the right model a substance is gas state, where the particles occupy the whole space, moving freely.

Thus, the image depicts the change of a substance from solid state to gaseus phase. Such change is defined as sublimation.

Therefor, the answer is the third choice of your list: sublimation.

The change observed is the process of sublimation in the model. The correct answer is (c) sublimation.

In that model, the spheres represent atoms or molecules (the same) of a substance. You can call them particles.

The particles tightly packed inside the cylinder on the left represent a substance in a solid state whose particles are in a fixed position and cannot move freely.

The particles are randomly distributed throughout the cylinder on the right model a substance is a gas state, where the particles occupy the whole space, moving freely.

Thus, the image depicts the change of a substance from a solid state to the gaseous phase. Such change is defined as sublimation.

Therefore, the answer is the third choice of your list sublimation. The correct answer is (c).

To know more about the sublimation:

https://brainly.com/question/29304516

#SPJ3

While pushing a refrigerator up a ramp, there would be less friction to overcome if you used a dolly because of the wheels. So the efficiency of the ramp would be greater with the use of the dolly.

Explanation:

The ramp provides for a wedge setup, so when the refrigerator is being pushed up the ramp, the friction on the ramp would equally distributed to the refrigerator when pushed wholly as the friction applied is a product of the coefficient of friction with the Normal reaction of the weight in contact with the surface.

Therefore, when the dolly is used, the surface in contact becomes divided and thus, the friction applied would become less due to though coefficient of friction remains the same, the normal reaction of the weight becomes small and so does the applied friction. Therefore, efficiency of the ramp increases as the friction is less and work done is more.

Answer:

Mechanical advantage of the ramp = [tex]\frac{980}{650} = 1.51[/tex]

Efficiency of the ramp = [tex]\frac{Actual\hspace{0.1cm} work\hspace{0.1cm} done}{Work}[/tex] = [tex]\frac{100\times 9.8\times 3}{650\times 5} = \frac{2940}{3250} = 0.9046 = 90.46%[/tex]

Explanation:

i) Mechanical advantage of the ramp = [tex]\frac{980}{650} = 1.51[/tex]

ii) Efficiency of the ramp = [tex]\frac{Actual\hspace{0.1cm} work\hspace{0.1cm} done}{Work}[/tex] = [tex]\frac{100\times 9.8\times 3}{650\times 5} = \frac{2940}{3250} = 0.9046 = 90.46%[/tex]

The mechanical advantage and the efficiency of the ramp are respectively;

330 N and 90%

I have drawn an image of the force diagram on the crate and attached it.

Applying Newton's second law to the force diagram attached, we have;

F_fric + F + N + mg = 0

Projecting forces gives us;

In the x-direction;

F = F_fric + mg*sin α

In the y-direction;

N - mg*cos α = 0

Also;

F_fric = μmg*cos α

Thus;

F = (μmg*cos α) + (mg*sin α)

Mechanical advantage is;

ΔF = mg - F

ΔF = mg - mg((μ cos α) + (sin α))

Since the ramp is 3 m high and 5 m long, then by trigonometric ratios;

(sin α) = 3/5

cos α = 4/5

But we are given that F is 650 N.

Thus;

ΔF = (100 × 9.8) - 650

ΔF = 330 N

Efficiency of the ramp is;

η = (mgh/Fl) × 100%

η = (100 × 9.8 × 3/(650 × 5)) × 100%

η ≈ 90%

Read more about mechanical advantage and efficiency at;https://brainly.com/question/9086278

Answer: no, it is an opinion and is not testable (a)

Explanation:

i just got this question on Study Island

Answer:

B

Explanation:

this is because the formula for calculating 1 half of the mass multiplied by the velocity squared

Answer:

b

Explanation:

Answer:

according to the method of their formation

Explanation:

Answer:

2 seconds

Explanation:

The frequency of a wave is related to its wavelength and  speed by the equation

[tex]f=\frac{v}{\lambda}[/tex]

where

f is the frequency

v is the speed of the wave

[tex]\lambda[/tex] is the wavelength

For the wave in this problem,

v = 2 m/s

[tex]\lambda=8 m[/tex]

So the frequency is

[tex]f=\frac{2}{8}=0.25 Hz[/tex]

The period of a wave is equal to the reciprocal of the frequency, so for this wave:

[tex]T=\frac{1}{f}=\frac{1}{0.25}=4 s[/tex]

This means that the wave takes 4 seconds to complete one full cycle.

Therefore, the time taken for the wave to go from a point with displacement +A to a point with displacement -A is half the period, therefore for this wave:

[tex]t=\frac{T}{2}=\frac{4}{2}=2 s[/tex]

The time taken by the wave to travel the vertical  displacement from the point on the rope to -A is 2 seconds

Given to us:

wavelength λ = 8 m,

Velocity v = 2 m/s,

The frequency of a wave is given by:

[tex]frequency=\dfrac{Velocity}{wavelength}\\f=\dfrac{V}{\lambda}\\\\f=\dfrac{2}{8}\\\\f= 0.25\ \rm Hz[/tex]

Therefore, the frequency of the wave is 0.25 Hz.

The period of a wave is equal to the reciprocal of the frequency,

[tex]{\rm period\ of\ time}(T),\\T=\dfrac{1}{f}\\T=\dfrac{1}{0.25}\\\\T=4\ sec[/tex]

Therefore, It takes 4 seconds to complete one full cycle.

Hence, the time taken by the wave to travel the vertical  displacement from the point on the rope to -A is 2 seconds as its is the half distance which is needed to be traveled by the wave.  

To know more visit:

https://brainly.com/question/956133

C) By altering the length of the pendulum

Explanation:

The period of a simple pendulum is given by the equation

[tex]T=2\pi \sqrt{\frac{L}{g}}[/tex]

where

L is the length of the pendulum

g is the acceleration due to gravity

In this problem, we are asked which adjustmenet can be done to speed up or slow down the pendulum clock: that means, which adjustment can be done in order to change the period of the pendulum.

From the equation above, we notice that the period of a pendulum depends only on its length (and the acceleration of gravity). Therefore, its period can be changed only by changing the length of the pendulum. And so, the only correct answer is

C) By altering the length of the pendulum

Learn more about period:

brainly.com/question/5438962

#LearnwithBrainly

Answer:

B

Explanation:

When a beam of light hits glass straight on it passes right through it. But the whites that make up the light actually get sloped down by the glass. And only go back to their normal speed when they come out the other side. That slowing down is what causes white light to split into a rainbow of color whenever it hits glass on an angle. it happens because glass slows some colors of light more than others and because slowing down on an angle causes them to slightly bend. All colors get bend somewhere in between. The reason that different colors get split is because they all have different wavelengths. The longest being red and violet being the shortest. The longer the wavelengths, the slower it is.  

Different wavelengths of visible light refract at different angles when passing from air to glass.

Refraction is the bending of light (it also happens with sound, water and other waves) as it passes from one transparent substance into another. This bending by refraction makes it possible for us to have lenses, magnifying glasses, prisms and rainbows.

When a beam of light hits glass straight on it passes right through it. But the whites that make up the light actually get sloped down by the glass. And only go back to their normal speed when they come out the other side.

That slowing down is what causes white light to split into a rainbow of color whenever it hits glass on an angle. it happens because glass slows some colors of light more than others and because slowing down on an angle causes them to slightly bend.

All colors get bend somewhere in between. The reason that different colors get split is because they all have different wavelengths. The longest being red and violet being the shortest. The longer the wavelengths, the slower it is.  

To know more about refraction of light follow

https://brainly.com/question/26928523

Answer:

1.47 km

Explanation:

When the pilot hangs freely in the seat and does not push against the  seat belt, his centripetal acceleration would counter balance gravitational acceleration g = 9.81m/s2 = a

We can calculate the radius of the loop using velocity v = 120m/s and a

[tex]a = \frac{v^2}{r}[/tex]

[tex]r = \frac{v^2}{a} = \frac{120^2}{9.81} = 1467.89 m[/tex] or 1.46 km

The radius of the plane's loop is approximately 1469.4 meters. This is determined by equating the centripetal force and gravitational force at the top of the loop and solving for radius.

The question is about determining the radius of a plane's loop while considering the gravitational force and centripetal acceleration. At the top of the loop, the pilot is not pushed against the belt, which means the gravitational force is providing the necessary centripetal force. We can use the equation of motion for circular motion to solve the problem.

Given that the mass (m) of the pilot is 75 kg and he is travelling with a speed (v) of 120 m/s, and the acceleration due to gravity (g) is approximately 9.8 m/s². Centripetal force (mv²/r) is equal to the gravitational force (mg), hence we can equate mv²/r= mg. The unknown here is r (radius), which we can solve for by rearranging the equation to: r = v²/g. Plugging in the given values gives r = (120 m/s)² / 9.8 m/s² = approximately 1469.4 meters.

https://brainly.com/question/15072961

#SPJ11

Displacement and instantaneous:

Displacement is the distance vector that the object has displaced from its initial position. It is calculated from the starting point to the endpoint in the journey of the object in question. The displacement can be understood as the straight line joining the points mentioned above. Keep in mind that the actual path taken by the object is not related to the displacement. The exact route is the average distance.

Velocity is the speed in a particular direction. If I say the speed of the car was 10mph than it would be speed, but if I say the speed was 10mph in the right direction than it would be velocity. So, the Directional speed is velocity. Velocity is a vector quantity and follows the rules of vector algebra and cannot be added or subtracted. The notation of velocity is a v with an arrow on the top. The arrow just tells that the quantity in question is a vector.

Answer: see the explanation

Explanation:

The total amount of energy contained in an object is called its energy. Energy can exist in different forms, such as kinetic energy (energy of motion), potential energy (stored energy), thermal energy (heat), chemical energy (energy stored in chemical bonds), and many others.

To calculate the total energy of an object, you need to consider the different forms of energy it possesses. For example, if an object is moving, it has kinetic energy, which depends on its mass and velocity. The equation to calculate kinetic energy is KE = 0.5 * mass * velocity^2, where KE represents kinetic energy, mass is the object's mass, and velocity is its speed.

If an object is at a certain height above the ground, it has gravitational potential energy. The equation for gravitational potential energy is PE = mass * gravity * height, where PE represents potential energy, mass is the object's mass, gravity is the acceleration due to gravity (approximately 9.8 m/s^2 on Earth), and height is the object's height above a reference point.

Additionally, an object can have other forms of energy, such as thermal energy due to its temperature, chemical energy stored in its chemical bonds, or electrical energy if it has an electric charge.

It's important to note that the total energy of an object is the sum of all the different forms of energy it possesses. Each form of energy can be converted into another form, but the total energy remains constant, as stated by the law of conservation of energy.

In summary, the total amount of energy contained in an object is the sum of its different forms of energy, such as kinetic energy, potential energy, thermal energy, chemical energy, and others. To calculate the total energy, you need to consider the specific forms of energy present and use the appropriate equations. The law of conservation of energy states that energy cannot be created or destroyed, only converted from one form to another.

can u tell in a very easy where a small child can also understand

Brainly Ginny character avatar

AI-generated answer

The total amount of energy in an object is all the different kinds of energy that it has. Energy is what makes things happen and allows them to do work. It can come in different forms, like when you're running and have energy to move, or when you have a ball that can bounce and roll.

Imagine you have a toy car that you wind up. When you wind it up, you're putting energy into it. That energy gets stored inside the car. When you let go of the car, it starts moving and uses up that stored energy. This is an example of kinetic energy, which is the energy of motion.

Another kind of energy is potential energy. Let's say you have a ball on top of a hill. The ball has potential energy because it can roll down the hill. When you let the ball go, it starts rolling and its potential energy turns into kinetic energy as it moves.

Objects can also have thermal energy, which is heat energy. When you touch something hot, like a stove, you feel the thermal energy transferring to your hand.

Some objects have chemical energy stored inside them. For example, when you eat food, your body breaks it down and turns it into energy that you can use.

These are just a few examples of the different forms of energy. The total energy of an object is the sum of all the different kinds of energy it has. Energy can change from one form to another, but it cannot be created or destroyed.

So, to put it simply, the total energy of an object is all the different types of energy it has, like the energy of motion, heat, stored energy, and more

Explanation:

Correct.  Air has an index of refraction of approximately 1, and the angle of incidence is 35°.  The substance has an unknown index of refraction n, and the angle of refraction is 25°.

1 sin 35° = n sin 25°

n = 1.36

The speed of light in glass [tex]1.97 \times 10^{8}\ \mathrm{m} / \mathrm{s}[/tex]

The speed of light in Ruby is [tex]1.75 \times 10^{8} \mathrm{m} / \mathrm{s}[/tex]

The refractive index of air with respect to glass​ is 0.666

Explanation:

The refractive index is the degree of diffraction of a light beam passing from one medium to another. It can also be defined as the ratio of the speed of light in an empty space to the speed of light in a material. The equation is given as

          [tex]\text {refractive index, n\ or } \mu=\frac{\text c}{\text {v}}[/tex]

Given data:

[tex]\mu_{\text {glass}}=1.52[/tex]

[tex]\mu_{r u b y}=1.71[/tex]

Velocity of light in vacuum, c = [tex]3 \times 10^{8} \mathrm{m} / \mathrm{s}[/tex]

We need to find velocity of glass, ruby and refractive index ratio of air and glass

To find velocity of glass,

[tex]1.52=\frac{3 \times 10^{8}}{\text {velocity of glass}}[/tex]

[tex]\text {velocity of glass}=\frac{3 \times 10^{8}}{1.52}=1.97 \times 10^{8} \mathrm{m} / \mathrm{s}[/tex]

To find velocity of ruby,

[tex]1.71=\frac{3 \times 10^{8}}{\text {velocity of Ruby}}[/tex]

[tex]\text {velocity of Ruby}=\frac{3 \times 10^{8}}{1.71}=1.75 \times 10^{8}\ \mathrm{m} / \mathrm{s}[/tex]

To calculate the refractive index of air with respect to glass:   =  [tex]\frac{\mathrm{n}_{\text {air}}}{\mathrm{n}_{\text {glass}}}[/tex]

We know, the value of the refractive index of air is 1

The value of the refractive index of glass is 1.5

So, the ratio of them should be [tex]\frac{1}{1.5}=0.666[/tex]

Mechanical advantage of the ramp is 5

Explanation:

The Mechanical Advantage (MA) of a simple machine represents the factor of multiplication of the input force applied in the machine; it represents the mechanical advantage of the machine taking into account the energy losses due to internal frictional forces.

It is given by

[tex]MA=\frac{Load}{Effort}[/tex]

where

Load is the force in output, which is the weight of the object moved

Effort is the input force applied to move the object

For the ramp in this problem, we have:

Load = 100 N

Effort = 20 N

Therefore, the mechanical advantage is

[tex]MA=\frac{100}{20}=5[/tex]

Learn more about simple machines:

brainly.com/question/5352966

#LearnwithBrainly

Answer: 2.17 s

Explanation:

The described situation is related to projectile motion (also known as parabolic motion). So, this kind of motion has a vertical component and a horizontal component; however, in this case we will only need the equation related to the horizontal displacement [tex]x[/tex]:

[tex]x=V_{o}cos \theta t[/tex]

Where:

[tex]x=45 m[/tex] is the arrow's horizontal displacement

[tex]V_{o}=800 m/s[/tex] is the arrow's initial velocity

[tex]\theta=75\°[/tex] is the angle

[tex]t[/tex] is the time the arrow is in the air

Isolating [tex]t[/tex]:

[tex]t=\frac{x}{V_{o}cos \theta}[/tex]

Solving with the given data:

[tex]t=\frac{45 m}{800 m/s cos(75\°)}[/tex]

[tex]t=2.17 s[/tex] This is the time the arrow is in the air

Answer:

The answer is B (has greater mass)

The real car has more momentum because it has greater mass.

The correct answer is B. The real car has greater mass.

Momentum is defined as the product of an object's mass and its velocity. In this case, both the real car and the toy car are moving at the same speed of 10 km/h. However, since the real car has greater mass, it will have a greater momentum.

For example, let's say the real car has a mass of 1000 kg and the toy car has a mass of 100 kg. The momentum of the real car would be 1000 kg × (10 km/h) = 10,000 kg km/h, while the momentum of the toy car would be 100 kg × (10 km/h) = 1000 kg km/h. Therefore, the real car has more momentum than the toy car.

https://brainly.com/question/30677308

#SPJ2

Answer:

the initial conditions

Explanation:

The rest of the answers are

the duration of seasons on Earth

turn left toward the coast, turn right and head out to sea (in that order)

a warm, dry air mass moving over an area.

The two models assimilate data differently using different equations.

changes in ocean currents

In a model ensemble system, meteorologists change  the initial conditions each time they run a simulation of the same model.

Ensemble modelling is a process in which multiple diverse models are created to predict an outcome, either by employing a variety of modelling algorithms or by employing a variety of training data sets. The ensemble model then aggregates each base model's prediction, yielding a single final prediction for the unseen data.

The goal of using ensemble models is to reduce prediction generalization error. When the ensemble approach is used, the prediction error of the model decreases as long as the base models are diverse and independent. In making a prediction, the approach seeks the wisdom of the crowds.

Hence, in a model ensemble system, meteorologists change  the initial conditions each time they run a simulation of the same model. Option(c) is correct.

Learn more about   Ensemble here:

https://brainly.com/question/18364291

#SPJ2

Answer:

The answer is A

Explanation:

If it goes 80km/h on a flat highway than it is not going any faster or slower.

When a  car moves at 80 kilometers / hour on a flat, straight highway then the car would not accelerate, therefore the correct answer is option A.

The rate of change of the velocity with respect to time is known as the acceleration of the object.

As per the second option when the car slows from 80 km/h to 35 km/h, then it would accelerate with negative acceleration.

When the car turns in the corner car would accelerate because there is a change in the velocity of the motion.

Similarly in the last option when a car speeds up from 35 km/h to

80 km/h, then it would generate acceleration because there is a change in the velocity with respect to the time.

The first option is the tye only case when the car would not accelerate because there is no change in the velocity of the car, thus the correct answer is option A.

To learn more about acceleration from here, refer to the link;

https://brainly.com/question/107797

#SPJ2

ANSWER :

(A) AT RIGHT ANGLES TO THE DIRECTION THE WAVE TRAVELS.

EXPLANATION :

TRANSVERSE WAVES IS THAT IN WHICH THE PARTICLES VIBRATE WITH AN UP-AND-DOWN MOTION. THE PARTICLES IN A TRANSVERSE WAVE MOVE ACROSS OR PERPENDICULAR TO THE DIRECTION THAT THE WAVE IS TRAVELING OR AT RIGHT ANGLES TO THE DIRECTION THE WAVE TRAVELS.

Answer:

16. reflected

17. transmitted

18. refracted

Explanation:

The gravitational force of attraction on the surface of earth F = G M m/R²

Here G = gravitational constant = 6.67 x 10⁻¹¹

M = mass of the earth and m = mass of the body on the surface of earth .

R = radius of earth

In this question

mass of earth = 6 x 10²⁴ kg  and its radius = 6 x 10⁶ m

The values are substituted in the above equation

F = 6.67 x 10⁻¹¹ x 6 x 10²⁴ x 5 / ( 6 x 10⁶ )² =  49 N

The mass will be attracted by 49 N of force .

Answer:

                                     1             2               3          4            5

 New force ( N )           1.25      0.4166      48      175         150

Explanation:

We know that ,

Force ( f ) ∝ distance ( d )

1 )

initial distance =40 m

initial force = 5 N

F ∝ d

F = k d     ( k = proportionality constant )

5 = k * 40

k = (1/8)

new distance = 10 m

new force = ( 1/8 ) * 10 = 1.25 N

2)

d = 72 m

F = 2.5 N

k = 2.5/72

new distance = 12 m

new force = ( 2.5/72 ) * 12 = 0.4166 N

3)

d = 12 m

F = 8 N

k = 2/3

new distance = 72 m

new force = ( 2/3 ) *72 =  48 N

4 )

d = 6 m

F = 25 N

k = 25/6

new distance = 42 m

new force = ( 25/6)*42  = 175 N

5)

d = 10 m

F = 50 N

k = 5

new distance = 30 m

new force = 5 * 30 = 150 N