A construction company needs to remove 2 1/6 tons of dirt from a construction site. They can remove 710 tons of dirt each hour. What is the total number of hours it will take to remove the dirt?

Answer:

a) 91% of the scores were at or below her score.

b) 9% of the scores were above her score.

Step-by-step explanation:

When a value V is said to be in the xth percentile of a set, x% of the values in the set are lower than V and (100-x)% of the values in the set are higher than V.

In this problem, we have that:

Angela scored on the 91st percentile.

(a) What percentage of the scores were at or below her score?

Since Angela scored on the 91st percentile, 91% of the scores were at or below her score.

(b) What percentage were above?

Since Angela scored on the 91st percentile, 9% of the scores were above her score.

Angela scored higher than or equal to 91% of her peers, meaning 9% scored above her.

If Angela scored in the 91st percentile on her general aptitude test, that means she scored higher than or equal to 91% of the other scores. Therefore, (a) 91% of scores were at or below Angela's score. As for (b), if you subtract her percentile from 100%, you can determine that 9% of scores were above hers.

https://brainly.com/question/34021797

#SPJ3

Answer:

The measure of dispersion which is likely to vary most between your first and second samples is the range.

Step-by-step explanation:

The range and standard deviation of a data are measures of dispersion, i.e. they measure the degree to which the data is dispersed.

The formula to compute the range is:

[tex]Range=X_{max}-X_{min}[/tex]

The formula to compute the sample standard deviation is:

[tex]s=\sqrt{\frac{1}{n-1}\sum (X-\bar X)^{2} }[/tex]

The sample size is: n = 50.

Thus, the measure of dispersion which is likely to vary most between your first and second samples is the range.

Final answer:

The range is more likely to vary between two samples from a population due to its sensitivity to extreme values, whereas the standard deviation is a more stable measure of dispersion that accounts for all values in the dataset.

Explanation:

The measure of dispersion most likely to vary between the first and second samples from the population is the range. The range is sensitive to the particular values in the dataset because it only takes into account the smallest and largest values. Since each sample may have a different set of extreme values, the range can vary greatly from sample to sample. In contrast, the standard deviation is less likely to vary significantly between samples, as it measures the amount of variation or dispersion from the mean of a dataset and takes into account all the values in the set.

When drawing multiple samples from a population, the distribution of the sample means will tend to form a normal distribution around the population mean according to the Central Limit Theorem. In the case of a normally distributed population with a known mean and standard deviation, the sampling distribution of the sample mean will have a standard deviation equal to the population standard deviation divided by the square root of the sample size (known as the standard error).

Answer: m= 18g

Step-by-step explanation:

Let m= miles you can drive

g = g for gallons in tank

We know that there is directly proportional relation between the distance traveled by vehicle and the number of gallons of gas.

Then, rate of miles driven by you per gallon = [tex]\dfrac{m}{g}[/tex]

Since , rate of miles driven by you per gallon  = 18 miles per gallon (given)

Then,

[tex]\dfrac{m}{g}=18\\\\ m= 18g[/tex]

Hence, the equation to model this situation : m= 18g

Answer:1.04 ml/g.

Step-by-step explanation:

The formula we use to find the density :

[tex]\text{Density}=\dfrac{\text{Volume}}{\text{Mass}}[/tex]

We are given that ,

Volume of a sample of water = 11.4 mL

Mass of sample of water = 10.98 g

Then , the experimental density of the water sample will be :-

[tex]\text{Density}=\dfrac{11.4}{10.98}=1.03825136\approx1.04[/tex]  

Hence, the experimental density of the water sample is 1.04 ml/g.

Answer:

There are 320 milliliters of orange juice in the glass.

Step-by-step explanation:

Unit conversion problems can be solved by rules of three.

We have that each dL is worth 100 mL(milliliters).

How many milliliters of orange juice are in the glass?

How many ml are 3.2dL of juice?

1 dL - 100 mL

3.2 dL - x mL

[tex]x = 100*3.2[/tex]

[tex]x = 320[/tex]

There are 320 milliliters of orange juice in the glass.

The measure of juice is 320 milliliters.

Given that

A glass of orange juice contains 3.2 dL of juice.

We have to determine

How many milliliters of orange juice is in the glass?

According to the question

To determine the measure of juice in milliliters following all the steps given below.

A glass of orange juice contains 3.2 dL of juice.

Here 1 dL = 100 milliliters

Then,

The measure of juice in milliliters is,

[tex]\rm = 3.2 \times 100\\\\= 320 \ milliliters[/tex]

Hence, The measure of juice is 320 milliliters.

To know more about Units click the link given below.

https://brainly.com/question/1373943

Answer:

option b

-x^2 + 3x - 11

Step-by-step explanation:

we have to add the X of the same order

x^2

-3x^2 + 2x^2 = -x^2

x^1

4x + ( -x ) = 3x

x^0

0 + (-11) = -11

finally we accommodate and get the final result

-x^2 + 3x - 11

Answer:-x^2 + 3x - 11

Step-by-step explanation:

I got it right on the test

Answer:

There were 28.75 large boxes and 96.25 small boxes.

Step-by-step explanation:

Create a system of equations to solve.

State your variables

let x be the number of small boxes

let y be the number of large boxes

35x + 55y = 4950               Equation for weight

x + y = 125                          Equation for number of boxes

Rearrange equation for number of boxes to isolate "x".

x = 125 - y

Substitute the new equation into the equation for weight

35x + 55y = 4950

35(125 - y) + 55y = 4950

Expand the brackets

4375 - 35y + 55y = 4950       Combine like terms

4375 + 20y = 4950

Start isolating "y"

4375 + 20y = 4950

4375 - 4375 + 20y = 4950 - 4375         subtract 4375 from both sides

20y = 575

20y/20 = 575/20                         divide both sides by 20

y = 28.75                   number of large boxes

Calculate "x". Rearrange the equation for number of boxes to isolate "y".

y = 125 - x                    Substitute this expression

35x + 55y = 4950                          equation for weight

35x + 55(125 - x) = 4950                 expand the brackets

35x + 6875 - 55x = 4950                     combine like terms

6875 - 20x = 4950                              start isolating "x"

6875 - 6875 - 20x = 4950 - 6875            subtract 6875 on both sides

-20x = -1925

-20x/-20 = -1925/-20                     divide both sides by -20

x = 96.25                    number of small boxes

There is a mistake with this question because you should not be able to have partial boxes. However, the answer is:

There were 28.75 large boxes and 96.25 small boxes.

Answer:

a. The angle [tex]\phi[/tex] between the vectors [tex]\mathbf{u}=\left(\sqrt{3}, 1\right)[/tex] and [tex]\mathbf{v}=\left(0, 5\right)[/tex] is [tex]\phi=\frac{\pi}{3}[/tex] or [tex]60\º[/tex].

b. The angle [tex]\phi[/tex] between the vectors [tex]\mathbf{u}=\left(0, 4, 4\right)[/tex] and [tex]\mathbf{v}=\left(3, -3, 0\right)[/tex] is [tex]\phi=\frac{2 \pi}{3}[/tex] or [tex]120\º[/tex].

Step-by-step explanation:

a. To calculate the angle [tex]\phi[/tex] between the vectors [tex]\mathbf{u}=\left(\sqrt{3}, 1\right)[/tex] and [tex]\mathbf{v}=\left(0, 5\right)[/tex] you must:

Step 1: Calculate the dot product.

The dot product is given as [tex]\displaystyle{\large{{\left({u}_{{x}},{u}_{{y}}\right)}\cdot{\left({v}_{{x}},{v}_{{y}}\right)}={u}_{{x}}\cdot{v}_{{x}}+{u}_{{y}}\cdot{v}_{{y}}}}[/tex].

So,

[tex]\left(\sqrt{3}, 1\right)\cdot\left(0, 5\right)=\left(\sqrt{3}\right)\cdot\left(0\right)+\left(1\right)\cdot\left(5\right)=5[/tex]

Step 2: Find the lengths of the vectors.

[tex]\left|\mathbf{u}\right|=\sqrt{\left(u_x\right)^2+\left(u_y\right)^2}=\sqrt{\left(\sqrt{3}\right)^2+\left(1\right)^2}=2[/tex]

[tex]\left|\mathbf{v}\right|=\sqrt{\left(v_x\right)^2+\left(v_y\right)^2}=\sqrt{\left(0\right)^2+\left(5\right)^2}=5[/tex]

Step 3: The angle is given by [tex]\cos\left(\phi\right)=\frac{\mathbf{u} \cdot \mathbf{v}}{\left|\mathbf{u}\right| \cdot \left|\mathbf{v}\right|}[/tex]

[tex]\frac{5}{2 \cdot 5}=\frac{1}{2}[/tex]

[tex]\phi=cos^{-1}\left(\frac{1}{2}\right)=\frac{\pi}{3}=60^0[/tex]

b. To calculate the angle [tex]\phi[/tex] between the vectors [tex]\mathbf{u}=\left(0, 4, 4\right)[/tex] and [tex]\mathbf{v}=\left(3, -3, 0\right)[/tex] you must:

Step 1: Calculate the dot product.

[tex]\left(0, 4, 4\right)\cdot\left(3, -3, 0\right)=\left(0\right)\cdot\left(3\right)+\left(4\right)\cdot\left(-3\right)+\left(4\right)\cdot\left(0\right)=-12[/tex]

Step 2: Find the lengths of the vectors.

[tex]\left|\mathbf{u}\right|=\sqrt{\left(u_x\right)^2+\left(u_y\right)^2+\left(u_z\right)^2}=\sqrt{\left(0\right)^2+\left(4\right)^2+\left(4\right)^2}=4 \sqrt{2}[/tex]

[tex]\left|\mathbf{v}\right|=\sqrt{\left(v_x\right)^2+\left(v_y\right)^2+\left(v_z\right)^2}=\sqrt{\left(3\right)^2+\left(-3\right)^2+\left(0\right)^2}=3 \sqrt{2}[/tex]

Step 3: The angle is given by [tex]\cos\left(\phi\right)=\frac{\mathbf{u} \cdot \mathbf{v}}{\left|\mathbf{u}\right| \cdot \left|\mathbf{v}\right|}[/tex]

[tex]\cos\left(\phi\right)=\frac{\mathbf{u} \cdot \mathbf{v}}{\left|\mathbf{u}\right| \cdot \left|\mathbf{v}\right|}=\frac{-12}{4 \sqrt{2} \cdot 3 \sqrt{2}}=- \frac{1}{2}[/tex]

[tex]\phi=cos^{-1}\left(- \frac{1}{2}\right)=\frac{2 \pi}{3}=120^0[/tex]

To find the angle between two vectors, use the dot product formula. For the vectors (√3,1) and <0, 5 >, the angle is π/3 radians. For the vectors <0,4,4> and <3,-3,0>, the angle is 2π/3 radians.

To find the angle between two vectors, we can use the dot product formula. Let's start with the first set of vectors (√3,1) and <0, 5>. We can calculate the dot product by multiplying the corresponding components and adding them up: (√3)(0) + (1)(5) = 5. Next, we need to calculate the magnitudes of each vector. The magnitude of (√3,1) is √(√3)^2 + 1^2 = √4 = 2. The magnitude of <0, 5> is √0^2 + 5^2 = √25 = 5. Now, we can calculate the angle between the vectors using the formula: cosθ = dot product / (magnitude 1 * magnitude 2). Plugging in the values, cosθ = 5 / (2 * 5) = 1/2. Taking the inverse cosine of 1/2 gives us the angle in radians: θ = acos(1/2) = π/3 ≈ 1.047.

For the second set of vectors <0,4,4> and <3,-3,0>, we will follow the same steps. The dot product is (0)(3) + (4)(-3) + (4)(0) = -12. The magnitude of <0,4,4> is √0^2 + 4^2 + 4^2 = √32 = 4√2. The magnitude of <3,-3,0> is √3^2 + (-3)^2 + 0^2 = √18 = 3√2. Plugging in the values, cosθ = -12 / (4√2 * 3√2) = -1/2. Taking the inverse cosine of -1/2 gives us the angle in radians: θ = acos(-1/2) = 2π/3 ≈ 2.094.

https://brainly.com/question/25987114

#SPJ3

Answer:

a) Selling price y= a + b (age x)

b)

a= 728.025

b= -38.217

c)

Selling price y = 728.025 - 38.217 age x

d)

SSE=8280.25

Step-by-step explanation:

a)

The regression model can be written as

y=a+bx

Here y=selling price and x is age.

So, the regression model will be

Selling price y= a + b (age x)

b)

We have to find the values of "a" and "b"

[tex]b=\frac{nsumxy-(sumx)(sumy)}{nsumx^{2} -(sumx)^2}[/tex]

sumx=5+10+12+14+15=56

sumy=500+400+300+200+100=1500

sumxy=5*500+10*400+12*300+14*200+15*100=14400

sumx²=5²+10²+12²+14²+15²=690

n=5

[tex]b=\frac{5(14400)-(56)(1500)}{5(690) -(56)^2}[/tex]

b=-12000/314

b=-38.217

ybar=a+bxbar

a=ybar-bxbar

ybar=sumy/n=1500/5=300

xbar=sumx/n=56/5=11.2

a=300-(-38.217)(11.2)

a=300+428.025

a=728.025

c)

Selling price y = a - b(age x)

Selling price y = 728.025 - 38.217 age x

d)

SSE known as sum of square of error can be calculated as

SSE=sum(y-yhat)²

y  500 400 300 200 100

x   5      10    12     14    15

yhat= 728.025 - 38.217 age x 536.940  345.855 269.421  192.987  154.770

y-yhat  -36.940  54.145  30.579 7.013  -54.770

(y-yhat)² 1364.56  2931.68  935.08  49.18  2999.75

SSE=sum(y-yhat)²

SSE=1364.56 +2931.68 +935.08 +49.18 +2999.75

SSE =8280.25

Answer:

[tex]1332.1 \:cm^3[/tex] is neither significantly low nor significantly high.

Step-by-step explanation:

From the information given, we know that:

The mean is [tex]\bar{x}=1105.1 \:cm^{3}[/tex] and the standard deviation is [tex]\sigma=123.5 \:cm^{3}[/tex].

The range rule of thumb says that:

[tex]minimum \:usual \:value=\bar{x}-2\sigma\\\\maximum \:usual \:value=\bar{x}+2\sigma[/tex]

Applying these definitions, we get that

[tex]minimum \:usual \:value=1105.1-2(123.5)=858.1 \:cm^3\\\\maximum \:usual \:value=1105.1+2(123.5)=1352.1 \:cm^3[/tex]

We note that [tex]1332.1 \:cm^3[/tex] is between [tex]858.1 \:cm^3[/tex] and [tex]1352.1 \:cm^3[/tex], which indicates  [tex]1332.1 \:cm^3[/tex] is neither significantly low nor significantly high.

Answer:

Step-by-step explanation:

Given:

[tex]P(S\cap F)=0.44\\P(S\cap F^{c})=0.13\\P(S^{c}\cap F^{c}) = 0.32\\P(S^{c}\cap F) = 0.11[/tex]

The rule of total probability states that:

[tex]P(A) = P(A\cap B) + P(A\cap B^{c})[/tex]

Compute the individual probabilities as follows:

[tex]P(S) = P(S\cap F) + P(S\cap F^{c})\\=0.44+0.13\\0.57[/tex]

[tex]P(S^{c}) = 1 - P(S)\\=1-0.57\\=0.43[/tex]

[tex]P(F) = P(S\cap F) + P(S^{c}\cap F)\\=0.44+0.11\\=0.55[/tex]

[tex]P(F^{c})=1-P(F)\\=1-0.55\\=0.45[/tex]

Conditional probability of an event A given B is:

[tex]P(A|B)=\frac{P(A\cap B)}{P(B)}[/tex]

         [tex]P(S|F)=\frac{P(S\cap F)}{P(F)}\\=\frac{0.44}{0.55}\\=0.80[/tex]

        [tex]P(S|F^{c})=\frac{P(S\cap F^{c})}{P(F^{c})}\\=\frac{0.13}{0.45}\\=0.289[/tex]

        [tex]P(S^{c}|F)=\frac{P(S^{c}\cap F)}{P(F}\\=\frac{0.11}{0.55}\\=0.20[/tex]

       [tex]P(S^{c}|F^{c})=\frac{P(S^{c}\cap F^{c})}{P(F^{c})}\\=\frac{0.32}{0.45}\\=0.711[/tex]

The probability of successful product given favorable test market is 0.80, and the probability of successful product given unfavorable test market is 0.29. The probability of unsuccessful product given favorable test market is 0.20, and the probability of unsuccessful product given unfavorable test market is 0.71.

To solve this, we first need to determine the total probability of each market test outcome. The probability that the market test is favorable (P(favorable test market)) can be found by summing the probabilities of a successful product with a favorable test market and an unsuccessful product with a favorable test market. Therefore, P(favorable test market) = 0.44 + 0.11 = 0.55. Similarly, P(unfavorable test market) = 0.13 + 0.32 = 0.45.

To find the conditional probabilities, we use the formula P(A|B) = P(A and B) / P(B):

https://brainly.com/question/32171649

#SPJ3

Final answer:

The appropriate conclusion from the survey is that the true percentage of all people who regularly use sunscreen in the region is estimated to be between 18% and 20%, considering the margin of error of 1 percentage point.

Explanation:

Based on the estimate and the margin of error, an appropriate conclusion is that it can be said with a certain level of confidence, usually 95%, that the true percentage of all people living in that region who regularly use sunscreen when going outdoors is between 18% and 20%. The margin of error gives a range around the estimate to account for the sampling error, and it implies that the actual value in the population should fall within this range. This helps to understand the precision of the survey result and allows for the natural variability that comes from the fact that not every individual in the region was surveyed.

The variability also depends on the size of the sample, which relates to the confidence interval. For example, smaller samples tend to have larger margins of error, while larger samples tend to lead to smaller margins of error and thus, more precise estimates of the population parameter.

Answer:

a) 52.15

b) 58.53

c) 62.98        

Step-by-step explanation:

We are given the following information in the question:

Mean, μ = 56

Standard Deviation, σ = 3

We are given that the distribution of x is a bell shaped distribution that is a normal distribution.

Formula:

[tex]z_{score} = \displaystyle\frac{x-\mu}{\sigma}[/tex]

a) We have to find [tex]x_0[/tex] such that

P(X < x)  = 0.1

[tex]P( X < x) = P( z < \displaystyle\frac{x_0 - 56}{3})=0.1[/tex]  

Calculation the value from standard normal z table, we have,  

[tex]P(z < -1.282) = 0.1[/tex]

[tex]\displaystyle\frac{x_0 - 56}{3} = -1.282\\\\x_0 = 52.15[/tex]

b) We have to find [tex]x_0[/tex] such that

P(X < x)  = 0.8

[tex]P( X < x) = P( z < \displaystyle\frac{x_0 - 56}{3})=0.8[/tex]  

Calculation the value from standard normal z table, we have,  

[tex]P(z < 0.842) = 0.8[/tex]

[tex]\displaystyle\frac{x_0 - 56}{3} = 0.842\\\\x_0 = 58.53[/tex]

c) We have to find [tex]x_0[/tex] such that

P(X > x)  = 0.01

[tex]P( X > x) = P( z > \displaystyle\frac{x - 56}{3})=0.01[/tex]  

[tex]= 1 -P( z \leq \displaystyle\frac{x - 56}{3})=0.01 [/tex]  

[tex]=P( z \leq \displaystyle\frac{x - 56}{3})=0.99 [/tex]  

Calculation the value from standard normal z table, we have,  

[tex]P(z < 2.326) = 0.99[/tex]

[tex]\displaystyle\frac{x_0 - 56}{3} = 2.326\\\\x_0 = 62.98[/tex]

To find specific percentiles for a normally distributed variable x with mean 56 and standard deviation 3, you must use a z-score table or calculator to find the corresponding z-scores for the 10%, 80%, and top 1% percentages, then use the formula x0 = µ + z*σ to calculate x0.

To find the value x0 of the normally distributed random variable x with mean µ = 56 and standard deviation σ = 3, that corresponds to specific percentiles, one would typically use a z-score table (or a calculator with a normal distribution function). However, in this scenario, the values provided for the x variable and the associated z-scores in the question are incorrect and would not provide a reasonable answer. Instead, I will explain the steps needed to find x0 without using the incorrect values provided.

After finding each z-score, use the formula x0 = µ + z*σ to calculate the corresponding x0 for each case.

https://brainly.com/question/34741155

#SPJ3

Answer:

0.42

Step-by-step explanation:

Let the events be given as:

For twp mutually exclusive events, the probability of A1 is given as follows:

P (B1A1) = [tex]\frac{ P(B1) x P (BA1)}{P(A1)}[/tex]

             = 0.6

Solving the equation above  to get B1:

P (B1) = [tex]\frac{(0.8)x (0.6)}{(0.6)}[/tex]

         = 0.8

Therefore, computing P (A1B1) gives P(A1) × P (B1)

                                                          =  (0.8) × (0.6)

                                                          =  0.42 Ans

Answer:

7/12

Step-by-step explanation:

Step 1:  Find common denominators

The common denominator is 12

10/12 is already good

1/4 * 3/3 = 3/12

Step 2:  Subtract

10/12 - 3/12 = 7/12

Answer:  7/12

Final answer:

To subtract the fractions 10/12 and 1/4, find a common denominator, convert the fractions, and then subtract the numerators, resulting in the answer 7/12.

Explanation:

To subtract fractions with unlike denominators, you first need to find a common denominator. For the fractions 10/12 and 1/4, the common denominator is 12. You can convert 1/4 to 3/12, because 4 times 3 equals 12. Now you can subtract the fractions as follows:

10/12 - 3/12 = (10 - 3)/12 = 7/12

So, the answer to 10/12 - 1/4 is 7/12.

This process relies on the intuitive understanding that you can only subtract numerators if the denominators are the same. We never add or subtract the denominators themselves. When your fractions share the same denominator, the subtraction is straightforward as we are simply dealing with parts of the whole that are of the same size.

Answer:

[tex] A(40)= \frac{-200}{10+40} +4 (10 +40)=-4+200 = 196 [/tex]

Step-by-step explanation:

For this case the solution flows at a rate of 2L/min and leaves at 1L/min. So then we can conclude the volume is given by [tex] V= 10 +t[/tex]

Since the initial volume is 10 L and the volume increase at a rate of 1L/min.

For this case we can define A as the concentration for the salt in the container. And for this case we can set up the following differential equation:

[tex] \frac{dA}{dt}= 4 \frac{gr}{L} *2 \frac{L}{min} - \frac{A}{10+t}[/tex]

Because at the begin we have a concentration of 8 gr/L and would be decreasing at a rate of [tex] \frac{A}{10+t}[/tex]

So then we can reorder the differential equation like this:

[tex] \frac{dA}{dt} +\frac{A}{10+t} =8[/tex]

We find the solution using the integration factor:

[tex] \mu = -\int \frac{1}{10+t} dt = -ln(10+t)[/tex]

And then the solution would be given by:

[tex] A = e^{-ln (10+t)} (\int e^{\int \frac{1}{10+t} dt})[/tex]

And if we simplify this we got:

[tex] A= \frac{1}{10+t} (c + \int (10 +t) 8 dt)[/tex]

And after do the integral we got:

[tex] A= \frac{c}{10+t} +4 (10 +t) [/tex]

And using the initial condition t=0 A= 20 we have this:

[tex] 20 = \frac{c}{10} +40[/tex]

[tex] c= -200[/tex]

So then we have this function for the solution of A:

[tex] A= \frac{-200}{10+t} +4 (10 +t) [/tex]

And now replacinf t= 40 we got:

[tex] A(40)= \frac{-200}{10+40} +4 (10 +40)=-4+200 = 196 [/tex]

The amount of salt in the tank after 40 minutes is determined by first calculating the total amount of salt added to the tank, then considering the amount of salt-water mixture that exited the tank during this period due to the outgoing flow.

This question relates to a typical problem within the field of differential equations. You are asked to find the amount of salt in the tank after 40 minutes. The initial amount of salt in the tank is 20g, and additional salt-water solution is being pumped in at a rate of 2L/min with a salt concentration of 4g/L, hence adding 8g of salt per minute. At the same time, the well-stirred mixture is flowing out at a rate of 1L/min.

Therefore, after 40 minutes:
Additional salt added = 8g/min * 40 min = 320g.
Total salt content now = initial salt content + added salt = 20g + 320g = 340g.

However, within these 40 minutes,40 L of the mixture has flown out. Since the mixture is well-stirred, it retains the same concentration of salt as the mixture in the tank. Hence, if x is the amount of salt left in the tank, it will be on average the same concentration as that which flowed out and can be represented as follows: x/50 = (340-x)/40.

Solving for x we get the amount of salt left in the tank after 40 minutes.

https://brainly.com/question/33814182

#SPJ3

Answer:

The value of sensitivity obtained is equal to the one given in statement.

Step-by-step explanation:

Sensitivity is the ratio of number of positive test results to the number of individuals having disease. It is the ability of the test to detect all those with disease in the screened population.

Its formula is written as:

Sensitivity = [tex]\frac{number of true positives}{total with disease}[/tex]

So, in this case we have values

sensitivity = 14/16 = 0.875 So, the given statement is true.

Answer:

P(20≤x≤35) = 0.75 .

Step-by-step explanation:

We know that the probability distribution function of Uniform Distribution is represented as :

     If x follows Uniform(c,d) then,

          f(x) = [tex]\frac{1}{d-c}[/tex] where c < x < d

To fond the given probability it is better to first calculate the Cumulative Distribution Function(CDF) of Uniform Distribution.

The CDF of Uniform Distribution is P(X<=x) = [tex]\frac{x-c}{d-c}[/tex] where d > c .

Therefore, P(20<=x<=35) = P(x<=35) - P(x<20)

  P(x<=35) =  [tex]\frac{x-20}{40-20}[/tex]  because we are given c = 20 and d = 40.

                 = [tex]\frac{35-20}{40-20}[/tex] = 0.75

 P(x<20) =  [tex]\frac{x-20}{40-20}[/tex]  = [tex]\frac{20-20}{40-20}[/tex] = 0

Hence, P(20<=x<=35) = 0.75 - 0 = 0.75.

The probability of x being between 20 and 35 is 0.75 or 75%.

The uniform probability distribution is defined as:

P(x) = 1/(b-a) for a ≤ x ≤ b and 0 otherwise.

In this case, a=20 and b=40, so the probability P(20≤x≤35) can be calculated as:

P(20≤x≤35) = (35-20)/(40-20) = 15/20 = 0.75.

Therefore, the probability of x being between 20 and 35 is 0.75 or 75%.

https://brainly.com/question/32614835

#SPJ3

Answer:

The answer is shown in the attachment

Step-by-step explanation:

The detailed step by step and appropriate mathematical manipulation for the expression for the steady state capital stock per worker is as shown in the attachment.

Answer:

240,000 AUD to USD = 161,924.79 US Dollars or 150,000 USD to AUD = 222,316.63 Australian Dollars

Step-by-step explanation:

Answer:

Height of Lhotse mountain is greater than Ngadi Chuli mountain.

Height of Lhotse mountain is 632.0432 meter more than height of Ngadi Chuli mountain.

Step-by-step explanation:

Height of Lhotse mountain = 8516 meters

Height of Ngadi Chuli mountain = 25,866 feet

1 ft = 30.48 cm

[tex]25,866 feet =25,866\times 30.48 m=788,395.68 cm[/tex]

1 cm = 0.01 m

[tex]788,395.68 cm=788,395.68\times 0.01 m=7883.9568 m[/tex]

8516 meters > 7883.9568 m

Height of Lhotse mountain is greater than Ngadi Chuli mountain.

Difference in their height :

8516 meters -  7883.9568 m = 632.0432 m

Height of Lhotse mountain is 632.0432 meter more than height of Ngadi Chuli mountain.

The height of Ngadi Chuli is approximately 7871 meters, while the height of Lhotse is 8516 meters. Therefore, Lhotse is the taller mountain and is about 645 meters taller than Ngadi Chuli.

The height of Ngadi Chuli is given in feet, so we must first convert that to meters using the conversion factor 1 ft = 30.48 cm = 0.3048 m. Multiplying 25,866 feet by 0.3048 m/ft gives us an approximate height of 7871 meters for Ngadi Chuli.

Lhotse is given to be 8516 meters tall. Therefore, by comparing these two heights, we can determine that Lhotse is the taller mountain.

The difference in height is found by subtracting the height of Ngadi Chuli from that of Lhotse: 8516 m - 7871 m = 645 m. So, Lhotse is approximately 645 meters taller than Ngadi Chuli.

https://brainly.com/question/31956811

#SPJ3

Answer:

1. 1/12 or 0.083

2. 5/36 or 0.1389

3. 7/12 or 0.5833

4. 5/12 or 0.4167

5. 11/12 or 0.9167

6. 1/9 or 0.1111

7. 1/3 or 0.3333

8. 5/12 or 0.4167

Step-by-step explanation:

This problem can easily be understood by making sample space first.

Outcomes in sample space=S={(1,1),(1,2),(1,3),(1,4),(1,5),(1,6),(2,1),(2,2),(2,3),(2,4),(2,5),(2,6),(3,1),(3,2),(3,3),(3,4),(3,5),(3,6),(4,1),(4,2),(4,3),(4,4),(4,5),(4,6),(5,1),(5,2),(5,3),(5,4),(5,5),(5,6),(6,1),(6,2),(6,3),(6,4),(6,5),(6,6)}

Total outcomes=36

The probability in the following scenario is calculated as

Probability=number of outcomes/Total outcomes

1.

The sum is 4

The sum is 4 ={(1,3),(2,2),(3,1)}

number of outcomes=3

P(The sum is 4)=3/36=1/12 or 0.083

2.

The sum is 6

The sum is 6 ={(1,5),(2,4),(3,3),(4,2),(5,1)}

number of outcomes=5

P(The sum is 6)=5/36 or 0.1389

3.

The sum is at least 7

The sum is at least 7=The sum is greater than or equal to 7

The sum is at least 7={(1,6),(2,5),(2,6),(3,4),(3,5),(3,6),(4,3),(4,4),(4,5),(4,6),(5,2),(5,3),(5,4),(5,5),(5,6),(6,1),(6,2),(6,3),(6,4),(6,5),(6,6)}

number of outcomes=21

P(The sum is at least 7)=21/36

P(The sum is at least 7)=7/12 or 0.5833

4.

The sum is at least 8

The sum is at least 8=The sum is greater than or equal to 8

The sum is at least 8={(2,6),(3,5),(3,6),(4,4),(4,5),(4,6),(5,3),(5,4),(5,5),(5,6),(6,2),(6,3),(6,4),(6,5),(6,6)}

number of outcomes=15

P(The sum is at least 8)=15/36

P(The sum is at least 8)=5/12 or 0.4167

5.

The sum is less than 11

The sum is less than 11={(1,1),(1,2),(1,3),(1,4),(1,5),(1,6),(2,1),(2,2),(2,3),(2,4),(2,5),(2,6),(3,1),(3,2),(3,3),(3,4),(3,5),(3,6),(4,1),(4,2),(4,3),(4,4),(4,5),(4,6),(5,1),(5,2),(5,3),(5,4),(5,5),(6,1),(6,2),(6,3),(6,4)}

number of outcomes=33

P(The sum is less than 11)=33/36

P(The sum is less than 11)=11/12 or 0.9167

6.

The sum is 2, 3, or 12

The sum is 2, 3, or 12={(1,1),(1,2),(2,1),(6,6)}

number of outcomes=4

P(The sum is 2, 3, or 12)=4/36

P(The sum is 2, 3, or 12)=1/9 or 0.1111

7.

The sum is odd and no more than 7

The sum is odd and no more than 7={(1,2),(1,4),(1,6),(2,1),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(5,2),(6,1)}

number of outcomes=12

P(The sum is odd and no more than 7)=12/36

P(The sum is odd and no more than 7)=1/3 or 0.3333

8.

The sum is odd or prime

The sum is odd or prime={(1,1),(1,2),(1,4),(1,6),(2,1),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(5,2),(5,6),(6,1),(6,5)}

number of outcomes=15

P(The sum is odd or prime)=15/36

P(The sum is odd or prime)=5/12 or 0.4167

Probabilities are,

1. The sum is 4 = 1/12

2. The sum is 6 = 5/36

3. The sum is at least 7 = 7/12

4. The sum is at least 8 = 5/12

5. The sum is less than 11 = 11/12

6. The sum is 2, 3, or 12 = 1/9

7. The sum is odd and no more than 7 = 1/3

8. The sum is odd or prime = 19/36

When six sided die toss two times, Then total possible Outcomes shown below

[tex](1,1),(1,2),(1,3),(1,4),(1,5),(1,6),(2,1),(2,2),(2,3),(2,4),(2,5),(2,6),\\\\(3,1),(3,2),(3,3),(3,4),(3,5),(3,6),(4,1),(4,2),(4,3),(4,4),(4,5),(4,6),\\\\(5,1),(5,2),(5,3),(5,4),(5,5),(5,6),(6,1),(6,2),(6,3),(6,4),(6,5),(6,6)}[/tex]

Total number of  outcomes=36

Probability is calculated by dividing number of favourable outcomes by Total number of  outcomes

1. Favourable outcomes for the sum is 4 [tex]={(1,3),(2,2),(3,1)}[/tex]

number of outcomes=3

The probability of The sum is 4. = [tex]3/36=1/12 = 0.083[/tex]

2.Favourable outcomes for the sum is 6[tex]={(1,5),(2,4),(3,3),(4,2),(5,1)}[/tex]

number of outcomes=5

The probability of The sum is 6, =5/36  

3.The sum is at least 7,

={(1,6),(2,5),(2,6),(3,4),(3,5),(3,6),(4,3),(4,4),(4,5),(4,6),(5,2),(5,3),(5,4),(5,5),(5,6),(6,1),(6,2),(6,3),(6,4),(6,5),(6,6)}

number of outcomes=21

Probability of the sum is at least 7 =21/36=7/12 = 0.5833

4.The sum is at least 8

The sum is at least 8={(2,6),(3,5),(3,6),(4,4),(4,5),(4,6),(5,3),(5,4),(5,5),(5,6),(6,2),(6,3),(6,4),(6,5),(6,6)}

number of outcomes=15

The sum is at least 8=15/36 = 5/12 = 0.4167

5.The sum is less than 11

The sum is less than 11={(1,1),(1,2),(1,3),(1,4),(1,5),(1,6),(2,1),(2,2),(2,3),(2,4),(2,5),(2,6),(3,1),(3,2),(3,3),(3,4),(3,5),(3,6),(4,1),(4,2),(4,3),(4,4),(4,5),(4,6),(5,1),(5,2),(5,3),(5,4),(5,5),(6,1),(6,2),(6,3),(6,4)}

number of outcomes=33

The sum is less than 11=33/36 = 11/12

6.The sum is 2, 3, or 12={(1,1),(1,2),(2,1),(6,6)}

number of outcomes=4

The sum is 2, 3, or 12=4/36 = 1/9

7.The sum is odd and no more than 7={(1,2),(1,4),(1,6),(2,1),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(5,2),(6,1)}

number of outcomes=12

The sum is odd and no more than 7=12/36 = 1/3

8.The sum is odd or prime={(1,1),(1,2),(1,4),(1,6),(2,1),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(5,2),(5,6),(6,1),(6,5), (3, 6), (6, 3), (4,5), (5, 4)

number of outcomes=19

The sum is odd or prime=19/36

Learn more:

https://brainly.com/question/23417919

Answer:

skew lines

Step-by-step explanation:

Given are two lines in 3 dimension as

[tex]L1: x=23+6t, y=12+3t, z=19+5t\\L2: x=-9+7t, y=-7+5t, z=-12+8t[/tex]

To find out whether parallel or skew or intersect

If parallel direction ratios should be proportional

Direction ratios of I line are 6,3,5 and not proportional to that of II line (7,5,8)

So not parallel

If intersect we must have same point for the two lines

Let us change parameter for II line to s to avoid confusion.  If intersecting, then

[tex]23+6t = -9+7s\\12+3t = -7+5s\\19+5t =12+8s\\[/tex]

6t-7s=-32 and 3t-5s = -19

Solving

t=-3 and s =2

Check this with III equation

Left side = 19-15 =4 and right side = 12+16 =28

not equal

So there cannot be any point of intersection.

These two are skew lines

Answer:

a) P=0.0225

b) P=0.057375

Step-by-step explanation:

From exercise we have that  15​% of items produced are defective, we conclude that  probabiity:

P=15/100

P=0.15

a)  We calculate the probabiity  that two items are​ defective:

P= 0.15 · 0.15

P=0.0225

b)  We calculate the probabiity  that  two  of  three items are​ defective:

P={3}_C_{2} · 0.85 · 0.15 · 0.15

P=\frac{3!}{2!(3-2)!} · 0.019125

P=3 · 0.019125

P=0.057375

Using the binomial distribution, it is found that there is a:

a) 0.0225 = 2.25% probability that both are​ defective.

b) 0.0574 = 5.74% probability that two are​ defective.

For each item, there are only two possible outcomes, either it is defective, or it is not. The probability of an item being defective is independent of any other item, hence, the binomial distribution is used to solve this question.

Binomial probability distribution

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]C_{n,x} = \frac{n!}{x!(n-x)!}[/tex]

The parameters are:

In this problem, 15​% of items produced are defective, hence [tex]p = 0.15[/tex].

Item a:

Two items, hence [tex]n = 2[/tex].

The probability is P(X = 2), then:

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]P(X = 2) = C_{2,2}.(0.15)^{2}.(0.85)^{0} = 0.0225[/tex]

0.0225 = 2.25% probability that both are​ defective.

Item b:

Three items, hence [tex]n = 3[/tex].

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]P(X = 2) = C_{3,2}.(0.15)^{2}.(0.85)^{1} = 0.0574[/tex]

0.0574 = 5.74% probability that two are​ defective.

To learn more about the binomial distribution,  you can take a look at https://brainly.com/question/24863377

Answer:

Height(h) = 24in

Area = 204in²

Step-by-step explanation:

we would use the heron formula because we have all the sides to calulate the area

S  = (A+B+C)/2 = (25 + 17 + 26)/2 = 68/2 = 34

area = √s(s-a)(s-b)(s-c)  = √34(34-25)(34-17)(34-26) = √34(9)(17)(8) = √34x9x17x8 = √41616 = 204

area= (1/2)bh

    204 = (1/2)bh b= 17, h =?

204 = (1/2)17h

204 x 2 = 17h

408 = 17h

h = 408/17 = 24in

Height(h) = 24in

Area = 204in²

Answer:

Step-by-step explanation:

a) probability a person admitted to the hospital will suffer a treatment-caused injury due to negligence

P(injury) = 4%

P(negligence) = 1/4 = 0.25

We need to find probability (injury)(negligence)

P(injury) * P(negligence) = 0.04*0.25 = 0.01

b) probability a person admitted to the hospital will die from a treatment-caused injury

P(injury) = 4%

P(death) = 1/7

P(Injury) *P(death) = 0.04/7 = 0.00571

c) In the case of a negligent treatment-caused injury, what is the probability a malpractice claim will be paid

P(claim) = 1/7.5

P(payment) = 1/2

P(claim)*P(payment) = 1/7.5 * 1/2 = 0.06

Answer:

a.) 0.01

b.) 0.006

c.)0.00067

Step-by-step explanation:

The area of a triangle is 1/2 x base x height

Area = 1/2 x 24 x 28 = 336 square inches.

Because the corners are rounded the are would actually be just under 336 but no radius was given to get the exact area.

Answer:

yes

Step-by-step explanation:

Answer:

1. Let amount deposited now be P.

So P*(1.1106^44) = 1,000,000, which means P=9896.06

2. Let amount deposited now be P.

So P*(1.0553^44) = 1,000,000, which means P=93639.42

Step-by-step explanation:

Answer:

Step-by-step explanation:

Let P represent the amount that you need to invest today. Thus, principal = $P

The return would be compounded annually. So

n = 1

The rate at which the principal would be compounded is 11.06%. So

r = 11.06/100 = 0.1106

The investment would be for 44 years. So

t = 44

The formula for compound interest is

A = P(1+r/n)^nt

A = total amount in the account at the end of t years.

A = $1000000

Therefore

1000000 = P(1+0.1106/1)^1×44

1000000 = P(1.1106)^44

P = 1000000/101.05

P = $9896.1

2) if you can earn an annual return of 5.53 percent, then

r = 5.53/100 = 0.053

1000000 = P(1+0.53/1)^1×44

1000000 = P(1.053)^44

P = 1000000/9.7

P = $103093

Answer:

a) So 25% probability that exactly two heads occur, given that the first outcome was a tail.

b) 50% probability that exactly two heads occur, given that the first two outcomes were heads.

c) 0% probability that exactly two heads occur, given that the first two outcomes were tails.

Step-by-step explanation:

A probability is the number of desired outcomes divided by the number of total outcomes.

We have the following sample space, that is, the possible outcomes:

In which h is heads and t is tails

h - h - h

h - h - t

h - t - h

h - t - t

t - h - h

t - h - t

t - t - h

t - t - t

What is the probability that exactly two heads occur, given that

a. the first outcome was a tail

Four outcomes in which the first outcome was a tail. They are:

t - h - h

t - h - t

t - t - h

t - t - t

In only 1 one them, exactly two heads occur.

1/4 = 0.25

So 25% probability that exactly two heads occur, given that the first outcome was a tail.

b. the first two outcomes were heads

Two possibilities in which the first two outcomes were heads.

h - h - h

h - h - t

In 1 of them, we have exactly two heads.

1/2 = 0.5

So 50% probability that exactly two heads occur, given that the first two outcomes were heads.

c. the first two outcomes were tails

Two possibilities in which the first two outcomes were tails.

t - t - h

t - t - t

In none of them we have exactly 2 heads.

0% probability that exactly two heads occur, given that the first two outcomes were tails.

The probability of getting exactly two heads in three coin tosses is 5/8.

To find the probability of exactly two heads occurring in three coin tosses, we need to consider three different scenarios:

If the first outcome was a tail: In this case, we have two remaining tosses and we need both of them to be heads. The probability of getting a head on any single toss is 1/2, so the probability of getting two heads after a tail is (1/2) * (1/2) = 1/4.

If the first two outcomes were heads: In this case, we have one remaining toss and we need it to be a tail. The probability of getting a tail on the remaining toss is 1/2, so the probability of getting exactly two heads after two heads is (1/2) = 1/2.

If the first two outcomes were tails: In this case, we again have one remaining toss and we need it to be a head. The probability of getting a head on the remaining toss is 1/2, so the probability of getting exactly two heads after two tails is (1/2) = 1/2.

Adding up the probabilities of these three scenarios, the overall probability of getting exactly two heads in three coin tosses is 1/4 + 1/2 + 1/2 = 5/8.

Answer:

a) see attached

b) see attached

Step-by-step explanation:

There is existence of outlier in the Ni data and there is none is Cr data.

########################################

# You can try this out in R programming

cr = c(34, 1, 511, 2, 574, 496, 322, 424, 269, 140, 244, 252, 76, 108, 24,

38, 18, 34, 30, 191)

Ni = c(23, 22, 55, 39, 283, 34, 159, 37, 61, 34, 163, 140, 32,

23, 54, 837, 64, 354, 376, 471)

par(mfrow=c(1,2))

hist(cr, col='green')

hist(Ni, col='brown')

par(mfrow=c(1,2))

boxplot(cr, main = 'Boxplot of Cr')

boxplot(Ni, main = 'Boxplot of Ni')

boxplot(cr, Ni)

The question involves constructing histograms and boxplots for two sets of data on soil concentrations of certain metals. After construction, these should be analysed for differences in central tendency, spread, variability, skewness, or presence of outliers.

This question seems to be related to Mathematics, specifically Statistics and Data Analysis. Firstly, to construct a histogram, you need to group the data into 'bins' or 'intervals', count how many data points fall into each bin, and then plot these counts as bars in your histogram. It's similar for both Chromium (Cr) and Nickel (Ni) data.

To construct comparative boxplots, it's essential to: calculate the quartiles (Q1, Q2 aka median, and Q3), identify the minimum and maximum points, and define possible outliers. With these statistical measures, you can draw the boxplots for both sets and analyse them. The dataset Cr seems to have several values clustered in the low range while Ni seems to have more spread, which can be verified by the boxplot comparison.

The interpretation of the boxplots should reflect on any differences in central tendency and spread between the two sets of concentrations. The variability, skewness, or outliers could also be significantly different. Any such inferred details from the boxplots may hint towards different contamination levels or heterogeneity in each of the datasets.

https://brainly.com/question/33812621

#SPJ3