a 2.0 kg mass moving to the east at a speed of 4.0 m/s collides head-on in a perfectly inelastic collision with a stationary 2.0 kg mass. how much kinetic energy is lost during

Answer: 7.2V

Explanation:

Peak values or peak to peak voltage are calculated from RMS values, which implies VP = VRMS × √2, (assuming the source is a pure sine wave).

Since it's a sinusoidal voltage and measuring from an oscilloscope, the peak to peak voltage is gotten thus:

No of division X Volts/divisions

So, 3.6 x 2V = 7.2V

Final answer:

The peak-to-peak voltage of a sinusoidal signal covering 3.6 divisions on an oscilloscope set to 2 volts per division is 7.2 volts.

Explanation:

The question involves calculating the peak-to-peak voltage of a sinusoidal signal observed on an oscilloscope where the vertical scale is set to 2 volts per division. Given that the signal covers 3.6 divisions from positive to negative peak, we calculate the peak-to-peak voltage by multiplying the number of divisions the signal spans by the voltage per division.

To find the peak-to-peak voltage, we use the formula: Peak-to-Peak Voltage = Number of Divisions × Voltage per Division. Thus, the peak-to-peak voltage of the signal is 3.6 divisions × 2 volts/division = 7.2 volts.

Answer:

A) The expression of the electric field halfway between the plates, if the plates are in the plane Y-Z is:

[tex]\vec{E}=\displaystyle \frac{q}{LW\varepsilon_0}\vec{x}[/tex]

B) The expression for the magnitude of the electric field E₂ just in front of the plate two ends is:

[tex]|E_2|=\displaystyle \frac{q}{2LW\varepsilon_0}[/tex]

C) The charge density is:

[tex]\sigma_2=-4.2517\cdot10^{-3}C/m^2[/tex]

Completed question:

A capacitor is created by two metal plates. The two plates have the dimensions L = 0.49 m and W = 0.48 m. The two plates are separated by a distance, d = 0.1 m, and are parallel to each other.

A) The plates are connected to a battery and charged such that the first plate has a charge of q. Write an express of the electric field, E, halfway between the plates

B) Input an expression for the magnitude of the electric field, E₂. Just in front of plate two END

C) If plate two has a total charge of q =-1 mC, what is its charge density, σ in C/m2?

Explanation:

A) The expression of the field can be calculated as the sum of the field produced by each plate. Each plate can be modeled as 2 parallel infinite metallic planes. Because this is a capacitor connected by both ends to a battery, the external planes have null charge (the field outside the device has to be null by definition of capacitor). This means than the charge of each plate has to be distributed in the internal faces. Because this es a metallic surface and there is no external field, we can consider a uniform charge distribution (σ=cte). Therefore in this case for each plane:

[tex]\sigma_i=\displaystyle \frac{q_i}{LW}[/tex]

The field of an infinite uniform charged plane is:

[tex]\vec{E_i}=\displaystyle \frac{\sigma_i}{2\varepsilon_0}sgn(x-x_{0i})\vec{x} =\frac{q_i}{2LW\varepsilon_0}sgn(x-x_{0i})\vec{x}[/tex]

In this case, inside the capacitor, if the plate 1 is in the left and the plate 2 is in the right, the field for 0<x<d is:

[tex]\vec{E_1}\displaystyle=\frac{q}{2LW\varepsilon_0}sgn(x})\vec{x}=\frac{q}{2LW\varepsilon_0}\vec{x}[/tex]

[tex]\vec{E_2}\displaystyle=\frac{-q}{2LW\varepsilon_0}sgn(x-d})\vec{x}=\frac{q}{2LW\varepsilon_0}\vec{x}[/tex]

[tex]\vec{E}=\vec{E_1}+\vec{E_2}[/tex]

[tex]\vec{E}=\displaystyle \frac{q}{LW\varepsilon_0}\vec{x}[/tex]

B) we already obtain the expression of the field E₂ inside the space between the plates. Even if we are asked the expression just in front of the plate and not inside, the expression for |E₂| is still de same.

C) As seen above, we already obtain the charge density expression. Therefore we only have to replace the variables for the numerical values.

The electric field, E, halfway between the plates is (σ / ε₀). The electric field is written in terms of permittivity and surface charge density.

Given:
Length, L = 0.49 m

Width, W = 0.48 m

Distance, d = 0.1 m

Here:

E = electric field

σ = surface charge density

ε₀ = permittivity of free space

We must determine the surface charge density on each plate since the plates are wired to a battery and charged so that the first plate has a charge of q.

The area of the plate is:

Area of each plate (A) = L x W = 0.49 m x 0.48 m = 0.2352 m²

The surface charge density is given by:

σ = q / A

The electric field is computed as:

E = (σ / ε₀)

Hence, the electric field, E, halfway between the plates is (σ / ε₀). The electric field is written in terms of permittivity and surface charge density.

To learn more about the Electric field, here:

https://brainly.com/question/14058164

#SPJ3

#Complete question is:

A capacitor is created by two metal plates. The two plates have the dimensions L = 0.49 m and W = 0.48 m. The two plates are separated by a distance, d = 0.1 m, and are parallel to each other.

A) The plates are connected to a battery and charged such that the first plate has a charge of q. Write an express of the electric field, E, halfway between the plates

To solve this problem we will apply the concepts related to load balancing. We will begin by defining what charges are acting inside and which charges are placed outside.

PART A)

The charge of the conducting shell is distributed only on its external surface. The point charge induces a negative charge on the inner surface of the conducting shell:

[tex]Q_{int}=-Q1=-1.9*10^{-6} C[/tex]. This is the total charge on the inner surface of the conducting shell.

PART B)

The positive charge (of the same value) on the external surface of the conducting shell is:

[tex]Q_{ext}=+Q_1=1.9*10^{-6} C[/tex]

The driver's net load is distributed through its outer surface. When inducing the new load, the total external load will be given by,

[tex]Q_{ext, Total}=Q_2+Q_{ext}[/tex]

[tex]Q_{ext, Total}=1.9+3.8[/tex]

[tex]Q_{ext, Total}=5.7 \mu C[/tex]

(a) The total charge on the interior of the spherical conductor is -1.9 μC.

(b) The total exterior charge of the spherical conductor is 5.7 μC.

The given parameters;

The total charge on the interior is calculated as follows;

[tex]Q_{int} = - 1.9 \ \mu C[/tex]

The total exterior charge is calculated as follows;

[tex]Q_{tot . \ ext} = Q + Q_2\\\\Q_{tot . \ ext} = 1.9 \ \mu C \ + \ 3.8 \ \mu C\\\\Q_{tot . \ ext} = 5.7 \ \mu C[/tex]

Learn more about total charge on hollow spherical conductor here: https://brainly.com/question/14909974

The mathematical description that fits to find the circumference of a circle (Approximation we will make to the earth considering it Uniform) is,

[tex]\phi = 2\pi r[/tex]

Here,

r = Radius

The radius of the earth is 6378.01 km or 6378010m

Replacing we have that the circumference of the Earth is

[tex]\phi = 2\pi (6378010m)[/tex]

[tex]\phi = 40074000 m[/tex]

[tex]\phi = 40074*10^3 m[/tex]

Therefore the circumference of the Earth in m with 5 significant figures is [tex]40074*10^3 m[/tex] and using only trailing zeros the answer will be [tex]40074000m[/tex]

Answer:

Ventricular systole

Explanation:

This contraction causes an increase in pressure inside the ventricles, being the highest during the entire cardiac cycle. The ejection of blood contained in them takes place. Therefore, blood is prevented from returning to the atria by increasing pressure, which closes the bicuspid and tricuspid valves.

The highest pressure in the ventricles occurs during the ventricular systole phase of the cardiac cycle, when the ventricles are contracting to pump blood out to the body.

The pressure in the ventricles is highest during the ventricular systole phase of the cardiac cycle. At this point, the ventricles have filled up with blood and are contracting to pump this blood out into the body. This contraction greatly increases the pressure in the ventricles, leading to a peak pressure of around 120 mm Hg in the left ventricle, depending on the individual.

https://brainly.com/question/31667097

#SPJ3

Answer:

(a) Amplitude=0.0760 m

(b) Speed=0.337 m/s

Explanation:

(a) For amplitude

We can use the mentioned description of the motion and  the energy conservation principle to find amplitude of oscillatory motion

[tex]k_{i}+U_{i}=K_{f}+U_{f}\\ (1/2)mv^{2}+0=0+(1/2)kA^{2}\\ A^{2}=\frac{mv^{2}}{k} \\A=\sqrt{\frac{mv^{2}}{k}}\\ A=\sqrt{\frac{m}{k} }v\\ A=\sqrt{\frac{(0.800kg)}{16N/m} }(0.34m/s)\\A=0.0760m[/tex]

(b) For Speed

Again we can use the mentioned description of the motion and  the energy conservation principle to find amplitude of oscillatory motion

[tex]k_{i}+U_{i}=K_{f}+U_{f}\\ (1/2)m(v_{i})^{2}+0=(1/2)m(v_{f} )^{2}+(1/2)k(A/2)^{2}\\ (1/2)m(v_{i})^{2}=(1/2)m(v_{f} )^{2}+(1/2)k(A/2)^{2}\\(1/2)m(v_{i})^{2}-(1/2)k(A/2)^{2}=(1/2)m(v_{f} )^{2}\\(1/2)[m(v_{i})^{2}-k(A/2)^{2}]=(1/2)m(v_{f} )^{2}\\(v_{f} )^{2}=1/m[m(v_{i})^{2}-k(A/2)^{2}]\\As\\x=0.250A\\(v_{f} )^{2}=(1/0.800kg)[0.800kg(0.34m/s)^{2}-(16N/m)(0.250(0.07602m)/2)^{2}\\(v_{f} )^{2}=0.1138\\ v_{f}=\sqrt{0.1138}\\ v_{f}=0.337m/s[/tex]

Final answer:

The amplitude and speed of the block at a specified position in SHM can be determined by using conservation of energy, equating the initial kinetic energy to the maximum potential energy at the amplitude, and calculating the speed via energy values at a given displacement from equilibrium.

Explanation:

Let's break down the problem step by step:

1. Amplitude of Subsequent Oscillations (A):

  - When the block is hit with the hammer, it acquires an initial velocity of [tex]\(34.0 \, \text{cm/s}\)[/tex], which we'll convert to meters per second: [tex]\(v = 34.0 \, \text{cm/s} = 0.34 \, \text{m/s}\)[/tex].

  - The mechanical energy of the system (block + spring) is conserved. At the maximum extension (amplitude) of the oscillation, the kinetic energy is zero.

  - Therefore, the total mechanical energy at the maximum extension is equal to the potential energy stored in the spring:

    [tex]\[ E = U = \frac{1}{2} k A^2 \][/tex]

  - We can express the kinetic energy at the initial point as:

    [tex]\[ K = \frac{1}{2} m v^2 \][/tex]

  - Since the total mechanical energy is conserved, we have:

    \[ E = K + U \]

    [tex]\[ \frac{1}{2} k A^2 = \frac{1}{2} m v^2 \][/tex]

  - Solving for the amplitude \(A\):

    [tex]\[ A = \sqrt{\frac{m v^2}{k}} \][/tex]

  Substituting the given values:

 [tex]\[ A = \sqrt{\frac{0.800 \, \text{kg} \cdot (0.34 \, \text{m/s})^2}{16.0 \, \text{N/m}}} \][/tex]

  Calculating:

  [tex]\[ A \approx 0.34 \, \text{m} \][/tex]

Therefore, the amplitude of the subsequent oscillations is approximately 0.34 meters.

2. Block's Speed at [tex]\(x = 0.250A\)[/tex]:

  - At any position \(x\), the mechanical energy \(E\) of the system is given by:

   [tex]\[ E = \frac{1}{2} k x^2 + \frac{1}{2} m v^2 \][/tex]

  - At the maximum extension (amplitude), the kinetic energy is zero, so:

    [tex]\[ E = U(x = A) = \frac{1}{2} k A^2 \][/tex]

  - We can find the speed of the block at any position \(x\) using the amplitude \(A\):

    [tex]\[ v = \sqrt{\frac{k}{m} (A^2 - x^2)} \][/tex]

  Substituting the given value [tex]\(x = 0.250A\)[/tex]:

  [tex]\[ v = \sqrt{\frac{16.0 \, \text{N/m}}{0.800 \, \text{kg}} \left(0.34^2 - (0.250 \cdot 0.34)^2\right)} \][/tex]

Calculating:

 [tex]\[ v \approx 0.24 \, \text{m/s} \][/tex]

Therefore, the block's speed at the point where [tex]\(x = 0.250A\)[/tex] is approximately 0.24 meters per second

For a body with an aerodynamic profile to reach a low resistance coefficient, the boundary layer around the body must remain attached to its surface for as long as possible. In this way, the wake produced becomes narrow. A high shape resistance results in a wide wake. In this type of bodies, if there is turbulence, the drag coefficient increases because the pressure drag appears.

However, in the case of cylinders, it happens that the separation point of the boundary layer will move towards to the rear of the body, which will reduce the size of the wake and there will reduce the magnitude of the pressure drag.

In fluid dynamics, the sudden drop in drag coefficient when flow over a cylinder becomes turbulent is due to the shift from laminar to turbulent flow. As turbulence increases and 'energizes' the slower boundary layer of fluid on the cylinder, the overall drag is reduced and the drag coefficient decreases.

In flow over cylinders, the sudden drop in the drag coefficient when the flow becomes turbulent can be attributed to the shift from laminar to turbulent flow itself. As the speed or Reynolds number (N'R) increases, the type of flow changes, and so does the behavior of the viscous drag exerted on the moving object.

In laminar flow, layers flow without mixing and the viscous drag is proportional to speed. As the Reynolds number enters the turbulent range, the drag begins to increase according to a different rule, becoming proportional to speed squared. This turbulent flow introduces eddies and swirls that mix fluid layers.

However, beyond a point in the turbulent flow regime, the drag coefficient starts to decrease. This is because the turbulence begins to 'energize' the generally slower, boundary layer of fluid that clings to the surface of the cylinder, which reduces the overall strength of the drag created by the flow. Moreover, these energized layers of fluid effectively 'smooth out' the obstructive effect of the cylinder, leading to a sudden decrease in the drag coefficient.

https://brainly.com/question/11937154

#SPJ12

Answer:

Acceleration, [tex]a=6.51\times 10^{10}\ m/s^2[/tex]                                                

Explanation:

Given that,

Electric field, E = 680 N/C

Speed of the proton, v = 1.3 Mm/s

We need to find the acceleration of the proton. We know that the force due to motion is balanced by the electric force as :

[tex]qE=ma[/tex]

a and m are the acceleration and mass of the proton.

[tex]a=\dfrac{qE}{m}[/tex]

[tex]a=\dfrac{1.6\times 10^{-19}\times 680}{1.67\times 10^{-27}}[/tex]

[tex]a=6.51\times 10^{10}\ m/s^2[/tex]

So, the acceleration of the proton is [tex]a=6.51\times 10^{10}\ m/s^2[/tex]. Hence, this is the required solution.

Final Answer:

a) The proton's initial kinetic energy is [tex]\(8.66 \times 10^{-16}\)[/tex]J.

b) The proton gets as close as 6.00 cm to the line of charge.

Explanation:

a)  In part (a), the initial kinetic energy of the proton can be calculated using the formula [tex]\(KE = \frac{1}{2}mv^2\),[/tex]where [tex]\(m\)[/tex] is the mass of the proton and [tex]\(v\)[/tex] is its velocity.

Substituting the given values, we get [tex]\(KE = \frac{1}{2}(1.67 \times 10^{-27}\, \text{kg})(4.10 \times 10^3\, \text{m/s})^2\),[/tex] resulting in [tex]\(8.66 \times 10^{-16}\) J.[/tex]

b) In part (b), the proton's closest approach can be determined using the formula for electric potential energy [tex](\(PE\))[/tex] and kinetic energy [tex](\(KE\))[/tex] when the proton is momentarily at rest.

At the closest point, all the initial kinetic energy is converted to electric potential energy, so The electric potential energy is given by [tex]\(PE = \frac{k \cdot q_1 \cdot q_2}{r}\),[/tex] where [tex]\(k\)[/tex] is Coulomb's constant, [tex]\(q_1\) and \(q_2\)[/tex]  are the charges, and [tex]\(r\)[/tex] is the separation distance. Substituting the known values, [tex]\(q_1 = 1.60 \times 10^{-19}\, \text{C}\), \(q_2\)[/tex]  is the charge density multiplied by the length per unit length, and [tex]\(r\)[/tex] is the distance, we can solve for [tex]\(r\),[/tex] resulting in [tex]\(6.00\, \text{cm}\).[/tex]

Final answer:

The initial kinetic energy of the proton is calculated using the formula KE = 1/2 * m * v^2, yielding 1.40x10^-20 J. The question regarding how close the proton gets to the line of charge cannot be completely answered without additional details, such as the electric field strength around the linear charge.

Explanation:

The question involves calculations relating to a proton's motion in the electric field created by a linear charge. This falls under the subject of physics and includes principles of electromagnetism and kinematics, typically taught in college-level physics courses.

a) Calculate the proton's initial kinetic energy

The kinetic energy (KE) of an object moving with velocity v is given by the equation KE = 1/2 * m * v^2, where m is the mass of the object. For a proton with mass 1.67x10^-27 kg moving at 4.10x10^3 m/s, its initial kinetic energy is:

KE = 1/2 * (1.67x10^-27 kg) * (4.10x10^3 m/s)^2 = 1.40x10^-20 J.

b) How close does the proton get to the line of charge?

This part requires the concept of energy conservation and electrostatic force. However, without specifying the potential energy due to the proton's interaction with the linear charge, the question is incomplete. Usually, one would calculate the potential energy at the closest approach and set it equal to the original kinetic energy to solve for the distance. The issue requires more information, such as the electric field strength around the line of charge, to proceed with the calculation.

Answer:

0.0473m

Explanation:

345 ml = 0.000354 m3

6.5 cm = 0.065 m

20g = 0.02 kg

Since can is half filled with water, the water volume is 0.000354 / 2 = 0.000177 m cubed

Let water density be 1000kg/m3, the mass of this half-filled water is

1000*0.000177 = 0.177 kg

The total water-can system mass is 0.177 + 0.02 = 0.197 kg

For the system to stay balanced, this mass would be equal to the mass of the water displaced by the can submerged

The volume of water displaced, or submerged can is

0.197 / 1000 = 0.000197 m cubed

Then the volume of the can that is not submerged, aka above water level is

0.000354 - 0.000197 = 0.000157 m cubed

The base area of the can is

[tex]A = \pi r^2 = \pi (d/2)^2 = \pi (0.065)^2 = 0.003318 m squared[/tex]

The length of the can that is above water is

0.000157 / 0.003318 = 0.0473 m

The half-filled soda can displaces the equivalence of its own weight in water when placed in it. Half of the soda can's total volume will always be submerged since it is only half-filled i.e., half of the can's mass is displacing water.

The subject of this problem is the principles of buoyancy and volume. A half-filled soda can placed in water will displace its own weight of the water. The length of the can above the water level can be calculated using an understanding of volume and displacement.

First, calculate the volume of the can using the formula for the volume of a cylinder V = πr²h, where r is radius and h is height. Given the diameter of the can is 6.5 cm, the radius is 3.25 cm. The height can be calculated by rearranging the volume formula to find h. We know that the can's complete volume is 345 mL, so h (full can height) = V / (πr²).

From this, we can calculate the height of the can that is submerged in water. Since the can is half-filled, it displaces half its full weight in water. So half of the can's total volume will always be submerged. Therefore, the length of the can above the water will be half the total height of the can.

https://brainly.com/question/9582777

#SPJ11

Answer:

stone A is diamond.

Explanation:

given,

Volume of the two stone =  0.15 cm³

Mass of stone A = 0.52 g

Mass of stone B = 0.42 g

Density of the diamond =  3.5 g/cm³

So, to find which stone is gold we have to calculate the density of both the stone.

We know,

[tex]density[/tex][tex]\density = \dfrac{mass}{volume}[/tex]

density of stone A

[tex]\rho_A = \dfrac{0.52}{0.15}[/tex]

[tex]\rho_A = 3.467\ g/cm^3[/tex]

density of stone B.

[tex]\rho_B = \dfrac{0.42}{0.15}[/tex]

[tex]\rho_B = 2.8\ g/cm^3[/tex]

Hence, the density of the stone A is the equal to Diamond then stone A is diamond.

Neither of the stones is a real diamond because their densities, calculated using mass and volume, do not match the density of a real diamond.

The determination of whether a stone is a real diamond or a fake can be made by calculating the density of the stone. Density is calculated as the mass of an object divided by its volume. So, for stone A, the density is 0.52 g / 0.15 cm3 = 3.47 g/cm3, and for stone B, the density is 0.42 g / 0.15 cm3 = 2.8 g/cm3. The density of a real diamond is 3.5 g/cm3. Hence, neither stone A nor stone B is a real diamond as their densities are less than the density of a real diamond.

https://brainly.com/question/34199020

#SPJ3

Explanation:

Given that,

The dimensions of the largest building in the world is 632 m long, 710 yards wide, and 112 ft high. It basically forms a cuboid. The volume of a cuboidal shape is given by :

Since,

1 meter = 3.28084 feet

632 m = 2073.49 feet

1 yard= 3 feet

710 yards = 2130 feet

V = lbh

[tex]V=2073.49 \ ft\times 2130\ ft\times 112\ ft[/tex]

[tex]V=494651774.4\ ft^3[/tex]

[tex]V=4.94\times 10^8\ ft^3[/tex]

Also,

[tex]V=(4.94\times 10^8\ ft^3)(\dfrac{1\ m}{3.281})^3[/tex]

[tex]V=1.39\times 10^7\ m^3[/tex]

Hence, this is the required solution.

Answer:

22.8077659955 m deep

Explanation:

t = Time taken

u = Initial velocity

v = Final velocity

s = Displacement

a = Acceleration

g = Acceleration due to gravity = 9.81 m/s² = a

[tex]v^2-u^2=2as\\\Rightarrow v=\sqrt{2as+u^2}\\\Rightarrow v=\sqrt{2\times 9.81\times 6.1+0^2}\\\Rightarrow v=10.9399268736\ m/s[/tex]

[tex]v=u+at\\\Rightarrow t=\dfrac{v-u}{a}\\\Rightarrow t=\dfrac{10.9399268736-0}{9.81}\\\Rightarrow t=1.11518112881\ s[/tex]

Time taken to fall through the foam

[tex]3.2-1.11518112881=2.08481887119\ s[/tex]

Distance is given by

[tex]s=vt\\\Rightarrow s=10.9399268736\times 2.08481887119\\\Rightarrow s=22.8077659955\ m[/tex]

The vat is 22.8077659955 m deep

The depth of the vat obtained is 44.076 m

H = ½gt²

H = ½ × 9.8 × 3.2²

H = 4.9 × 10.24

H = 50.176 m

Depth of vat = H – h

Depth of vat = 50.176 – 6.10

Depth of vat = 44.076 m

Learn more about motion under gravity:

https://brainly.com/question/20385439

Answer:

[tex]v_0 = 16.82\ m/s[/tex]

Explanation:

given,

angle at which rock is thrown = 60°

rock lands at distance,d = 25 m

initial speed of rock, = ?

In horizontal direction

distance = speed x time

d = v₀ cos 60° t

25 = v₀ cos 60° t............(1)

now,

in vertical direction

displacement in vertical direction is zero

using equation of motion

[tex]s = ut +\dfrac{1}{2}gt^2[/tex]

[tex]0 =v_0 sin 60^0 t - 4.9 t^2[/tex]

[tex]v_o sin 60^0 = 4.9 t[/tex]

[tex]t = \dfrac{v_0 sin 60^0}{4.9}[/tex]

putting the value of t in equation (1)

[tex]25 = v_0 cos 60^0\times \dfrac{v_0 sin 60^0}{4.9}[/tex]

[tex]25 =\dfrac{v_0^2cos 60^0 sin 60^0}{4.9}[/tex]v

[tex]v_0^2 = 282.90[/tex]

[tex]v_0 = 16.82\ m/s[/tex]

Hence, the initial speed of the rock is equal to 16.82 m/s

The muzzle speed of the gun, when fired at an angle of elevation of 30° and reaching a maximum height of 544 m, is approximately 329 m/s.

The physics concept here is projectile motion. The muzzle speed of the gun can be calculated using the equation for the maximum height attained by a projectile, which is given by H = (V^2 * sin^2θ) / 2g, where V represents the muzzle speed, θ is the angle of elevation, and g is the acceleration due to gravity. Rearranging for V, and substituting the given values, we get:

V = sqrt((2 * H * g) / sin^2θ) = sqrt((2 * 544 m * 9.8 m/s^2) / sin^2 30°). Since sin 30° = 0.5, this leads to V = sqrt((2 * 544 m * 9.8 m/s^2) / (0.5)^2). The resulting muzzle speed, when calculated and rounded to the nearest whole number, is 329 m/s.

https://brainly.com/question/20627626

#SPJ3

Answer:

The question is incomplete, below is the complete question,

"A water balloon is launched at a speed of (15.0+A) m/s and an angle of 36 degrees above the horizontal. The water balloon hits a tall building located (18.0+B) m from the launch pad. At what height above the ground level will the water balloon hit the building? Calculate the answer in meters (m) and rounded to three significant figures. A=12, B=2"

Answe:

12.1m

Explanation:

Below are the data given

Speed, V=(15+A) = 15+12=27m/s

Angle of projection, ∝=36 degree

Distance from building = 18+B=18+2=20m

Since the motion describe by the object is a projectile motion, and recall that  in projectile motion, motion along the horizontal path has zero acceleration and motion along the vertical path is under gravity,

the Velocity along the horizontal path is define as

[tex]V_{x}=Vcos\alpha \\V_{x}=27cos36\\V_{x}=21.8m/s[/tex]

the velocity along the Vertical path is

[tex]V_{y}=Vsin\alpha \\V_{y}=27sin36 \\V_{y}=15.87m/s[/tex]

Since the horizontal distance from the point of projection to the building is 20m, we determine the time it takes to cover this distance using the simple equation of motion

[tex]Velocity=\frac{distance }{time }\\ Time,t=27/21.8\\t=1.24secs[/tex]

The distance traveled along the vertical axis is given as

[tex]y=V_{y}t-\frac{1}{2}gt^{2}\\ t=1.24secs,\\V_{y}=15.87m/s\\g=9.81m/s[/tex]

if we substitute values, we arrive at

[tex]y=15.87*1.24-\frac{1}{2}9.81*1.24^{2}\\y=19.66-7.57\\y=12.118\\y=12.1m[/tex]

Hence the water balloon hit the building at an height of 12.1m

Answer:

(a) [tex]T_{1}=490N[/tex]

(b) [tex]T_{2}=240N[/tex]

Explanation:

For Part (a)

Given data

The box moves up at steady 5.0 m/s

The mas of box is 50 kg

As ∑Fy=T₁ - mg=0

[tex]T_{1}=mg\\T_{1}=(50kg)(9.8m/s^{2} ) \\T_{1}=490N[/tex]

For Part(b)

Given data

[tex]v_{iy}=5m/s\\ a_{y}=-5.0m/s^{2}[/tex]

As ∑Fy=T₂ - mg=ma

[tex]T_{2}=mg+ma_{y}\\T_{2}=m(g+ a_{y})\\T_{2}=50kg(9.8-5.0) \\T_{2}=240N[/tex]

The tension in the rope varies depending on whether the box is at rest, moving at a constant velocity, or accelerating. The tension equals the weight of the box when it's at rest or moving constantly, but it will be increased or decreased by the net force caused by acceleration when the box is speeding up or slowing down.

If the box is at rest, the tension in the rope is equal to the force of gravity. We can calculate this using the formula T = mg, where m is the mass of the box and g is the acceleration due to gravity. Therefore, T = (50 kg)(9.8 m/s²) = 490 N.

When the box moves upwards with a constant velocity, the tension in the rope also equals the weight of the box (T = mg), so the tension will stay the same at 490 N.

However, when the box is speeding up, the net force is the product of mass and acceleration. In this case, acceleration = 5.0 m/s². Using the equation Fnet = ma, we find that Fnet = (50 kg)(5 m/s²) = 250 N. The total tension now includes both the tension due to the box's weight and the additional force due to the acceleration. Therefore, T = T(g) + Fnet = 490 N + 250 N = 740 N.

Lastly, when the box is slowing down at 5.0 m/s², the net force acts in the opposite direction of the initial velocity. Using the same calculations, we find Fnet = 250 N. But this force now reduces the tension originally caused by the box's weight, so the total tension in the rope becomes T = T(g) - Fnet = 490 N - 250 N = 240 N.

https://brainly.com/question/30794023

#SPJ11

Answer:

The vapor pressure of cyclohexane at 81.0°C is 101325 Pa.

Explanation:

Given that,

Boiling point = 81.0°C

Atmospheric pressure :

Atmospheric pressure is the force per unit area exerted by the weight of the atmosphere.

The value of atmospheric pressure is

[tex]P=101325\ Pa[/tex]

Vapor pressure :

Vapor pressure is equal to the atmospheric pressure.

Hence, The vapor pressure of cyclohexane at 81.0°C is 101325 Pa.

Answer:

ER = 0.008273 in

Explanation:

Given:

- Length of the specimen L = 2 in

- The diameter of specimen D = 0.5 in

- Specimen is loaded until it is stressed = 65 ksi

Find:

- Determine the approximate amount of elastic recovery after it is unloaded.

Solution:

- From diagram we can see the linear part of the curve we can determine the Elastic Modulus E as follows:

                                  E = stress / strain

                                  E = 44 / 0.0028

                                  E = 15714.28 ksi

- Compute the Elastic strain for the loading condition:

                                  strain = loaded stress / E

                                  strain = 65 / 15714.28

                                  strain = 0.0041364

- Compute elastic recovery:

                                   ER = strain*L

                                   ER = 0.0041364*2

                                   ER = 0.008273 in

The approximate amount of elastic recovery after unloading a stressed specimen is zero.

To determine the approximate amount of elastic recovery after unloading a stressed specimen, we need to consider the concept of elastic deformation. Elastic deformation refers to the temporary elongation or compression of a material when a stress is applied to it, and it returns to its original shape once the stress is removed.

Since the question does not provide specific information about the material or its elastic modulus, we cannot determine the exact amount of elastic recovery. However, we can generally say that the elastic recovery would be close to the original length of the specimen before it was loaded.

Therefore, we can assume that the approximate amount of elastic recovery would be zero, as the specimen would return to its original length.

Answer:

(a) Magnitude =3.18 km

(a) Angle =28.2°

Explanation:

(a) To find magnitude of this vector recognize

[tex]R_{x}=-2.8 km\\R_{y}=-1.5km[/tex]

Use Pythagorean theorem

[tex]R=\sqrt{(R_{x})^{2}+(R_{y})^{2} }\\ R=\sqrt{(-2.8)^{2}+(-1.5)^{2} }\\ R=3.18km[/tex]

(b)To find the angle use the trigonometric property

[tex]tan\alpha =\frac{opp}{adj}\\\ tan\alpha =\frac{R_{y} }{R_{x}}\\\alpha =tan^{-1}(\frac{(-1.5)}{(-2.8)})\\\alpha =28.2^{o}[/tex]

To solve this problem we will apply the concepts related to pressure, depending on the product between the density of the fluid, the gravity and the depth / height at which it is located.

For mercury, density, gravity and height are defined as

[tex]\rho_m = 846lb/ft^3[/tex]

[tex]g = 32.17405ft/s^2[/tex]

[tex]h_1 = 1in = \frac{1}{12} ft[/tex]

For the air the defined properties would be

[tex]\rho_a = 0.0075lb/ft^3[/tex]

[tex]g = 32.17405ft/s^2[/tex]

[tex]h_2 = ?[/tex]

We have for equilibrium that

[tex]\text{Pressure change in Air}=\text{Pressure change in Mercury}[/tex]

[tex]\rho_m g h_1 = \rho_a g h_2[/tex]

Replacing,

[tex](846)(32.17405)(\frac{1}{12}) = (0.0075)(32.17405)(h_2)[/tex]

Rearranging to find [tex]h_2[/tex]

[tex]h_2 = \frac{(846)(32.17405)(\frac{1}{12}) }{(0.0075)(32.17405)}[/tex]

[tex]h = 9400ft[/tex]

Therefore the elevation of the mountain top is 9400ft

The elevation of the mountain top is approximately 13,972 feet.

The difference in barometric pressure between the sea level and the top of the mountain represents the hydrostatic pressure exerted by the column of air. We can calculate the elevation of the mountain top by using the equation:

ΔP = ρgh

Where ΔP is the difference in pressure, ρ is the density of the air, g is the acceleration due to gravity, and h is the elevation. Rearranging the equation, we have:

h = ΔP / (ρg)

Substituting the given values, we have:

h = (30 - 29) in / (0.0075 lb/ft³ * 32.2 ft/sec²)

Simplifying the equation, we get:

h ≈ 13,972 ft

Therefore, the elevation of the mountain top is approximately 13,972 feet.

The torque required by the motor to spin a 220g, 23-cm-diameter plastic disk from 0 to 1800 rpm in 4.6 seconds, without considering the external forces, is 0.431 Nm.

In solving the question,

Torque

is our primary interest. We first need to convert rpm to rad/s since Torque calculations require SI units. The conversion can be done by the formula ω = 2π (frequency), and frequency is simply rpm/60. Hence, 1800 rpm is equivalent to 188.50 rad/s. Now, we use the Kinematics equation ω = ω

0

+ αt to calculate angular acceleration (α), where ω

0

is the initial angular velocity, and it is 0 rad/s in this case as the disk starts from rest, ω is the final angular velocity and is 188.50 rad/s, while t is the time of 4.6 seconds. Solving this gives us α=41 rad/s

2

. The Torque can now be calculated using τ=Iα where I (moment of inertia for a disk) = 0.5*m*r

2

. Substituting the values of m, r and α gives a Torque value of 0.431 Nm.

https://brainly.com/question/33222069

#SPJ12

Answer:

4.58 L.

Explanation:

Given that

V₁ = 5 L

T₁ = 25°C  = 273 + 25 = 298 K

T₂ = 0°C = 273 K

The final volume = V₂

We know that ,the ideal gas equation

If the pressure of the gas is constant ,then we can say that

[tex]\dfrac{V_2}{V_1}=\dfrac{T_2}{T_1}[/tex]

Now by putting the values in the above equation we get

[tex]V_2=V_1\times \dfrac{T_2}{T_1}\\V_2=5\times \dfrac{273}{298}\\V_2=4.58\ L\\[/tex]

The final volume of the balloon will be 4.58 L.

The answer details the vertical velocity needed and the horizontal distance required for a basketball player to complete a jump.

Vertical velocity: To rise 0.750 m above the floor, the athlete needs a vertical velocity of 5.43 m/s.

Horizontal distance: The athlete should start his jump 2.27 m away from the basket to reach his maximum height at the same time as he reaches the basket.

The work done by the electric force on the moving point charge is approximately -5.09 × 10^-5 J.

Work done by the electric force is given by the equation W = q1 * q2 * (1/r1 - 1/r2), where q1 and q2 are the charges, r1 is the initial distance, and r2 is the final distance.

In this case, q1 = 2.30 μC, q2 = -5.00 μC, r1 = 0.170 m, and r2 = 0.250 m. Plugging these values into the equation and solving for W, we get:

W = (2.30 μC) * (-5.00 μC) * [1/√(0.170^2) - 1/√(0.250^2 + 0.250^2)]

After simplifying, the work done is approximately -5.09 × 10^-5 J.

Learn more about Work done here:

https://brainly.com/question/35147902

#SPJ3

Answer:

Explanation:

Given

Wire attached to the tree at a point [tex]h=1.5\ m[/tex] from ground

Length of wire [tex]L=2\ m[/tex]

From diagram,

Using trigonometry

[tex]\sin \theta =\frac{Perpendicular}{Hypotenuse}[/tex]

[tex]\sin \theta =\frac{1.5}{2}[/tex]

[tex]\theta =48.59[/tex]

Angle between Tree and support[tex]=90-48.59=41.41^{\circ}[/tex]      

To find the angle between the tree and the support wire, we can use trigonometry. Given that the wire is 2.00 m long and attached to the tree at a point 1.50 m from the ground, the angle between the tree and the support wire is 41.1 degrees.

To find the angle between the tree and the support wire, we can use trigonometry. The wire and the ground form a right triangle, with the wire as the hypotenuse and the vertical distance from the ground to the point of attachment as the opposite side. Using the Pythagorean theorem, we can find the length of the base of the triangle, which is the distance between the point of attachment and the tree.

Given that the wire is 2.00 m long and attached to the tree at a point 1.50 m from the ground, we can calculate the length of the base using the Pythagorean theorem: square root of (2.00^2 - 1.50^2) = 1.30 m.

Now we can use the trigonometric function tangent to find the angle between the tree and the support wire: tangent(angle) = opposite/adjacent, where the opposite side is 1.30 m and the adjacent side is 1.50 m. Solving for the angle, we get: angle = arctan(1.30/1.50) = 41.1 degrees (rounded to one decimal place).

https://brainly.com/question/34406111

#SPJ3

Answer:

Q'sphere=2.7*10^-9 C

Q'rod=-4.7*10^-9 C

Explanation:

given data:

charge on metallic sphere Qsphere=3.1*10^-9 C                ∴1n=10^-9

charge on rod Qrod =-4*10^-9 C  

no of electron n= 9.2×10^9 electrons

To find:

we are asked to find the charges Q'sphere on the sphere and Q'rod on the rod after the rod touches the sphere.

solution:

the total charge transferred when the rod touches the sphere equal to the no of electrons transferred multiplied by the charge of each electron:

Q(transferred)= nq_(e)

                       =(9.2×10^9)(1.6×10^-19)

                       =-1.312×10^-9 C

because electron are negative they move from the negatively charged rod to the positively charged rod so that new charged of the sphere is:

      Q'sphere =Qsphere+Q(transferred)

                       =(3.1*10^-9 )-(1.312×10^-9)

                       =2.7*10^-9 C

similarly the new charge of the rod is:

            Q'rod = Qrod-Q(transferred)

                      = (-6*10^-9 C)-(1.312*10^-9 C)

                      = -4.7*10^-9 C

∴note: there maybe error in calculation but the method is correct.

Final answer:

Upon contact, a metallic sphere and a negatively charged rod share their charges until equilibrium. The total charge of -0.9 nC is equalized, with 9.2×109 electrons changing the sphere's charge to +1.628 nC and the rod's charge to -2.528 nC.

Explanation:

When two charged objects come into contact, they share their charges until equilibrium is reached. This means each object will end up with the average charge. In the case of the metallic sphere with a charge of +3.1 nC and the negatively charged rod with a charge of -4.0 nC, the total charge before contact is (-4.0 nC) + (+3.1 nC) = -0.9 nC.

Since 9.2×109 electrons are transferred, we calculate the charge transferred using the charge of one electron, which is approximately -1.6×10-19 C. Multiplying the number of electrons by the charge of one electron gives us the total charge transferred: 9.2×109 × -1.6×10-19 C/electron ≈ -1.472 nC.

This charge is added to the metallic sphere and subtracted from the rod. So, the new charge on the sphere is +3.1 nC + (-1.472 nC) = +1.628 nC, and the charge on the rod is -4.0 nC - (-1.472 nC) = -2.528 nC. Both charges are now closer in magnitude, representing the sharing of charges due to contact.

To solve this problem we will apply the concept of Electric Flow, which is understood as the product between the Area and the electric field. For the data defined by the area, we will use the geometric measurement of the area in a circle (By the characteristics of the object) This area will be equivalent to,

[tex]\phi = 35 cm[/tex]

[tex]r = 17.5 cm = 0.175 m[/tex]

[tex]A = \pi r^2 = \pi (0.175)^2 = 0.09621m^2[/tex]

Applying the concept of electric flow we have to

[tex]\Phi = EA[/tex]

Replacing,

[tex]5.42*10^5N \cdot m^2/C = E (0.09621m^2)[/tex]

[tex]E = 5.6335*10^6N/C[/tex]

Therefore the magnitude of the electric field is [tex]5.6335*10^6N/C[/tex]

Answer:

dog's mass in grams is [tex]20.1\times 10^3 grams[/tex]

dog's mass in milligrams is [tex]20.1\times 10^6 milligrams[/tex]

dog's mass in micrograms is[tex]20.1\times 10^9 micrograms[/tex]

Explanation:

dog has a mass of m= 20.1 kg

dog's mass in grams is given by [tex]20.1\times 1000 grams=20100 gms =20.1\times 10^3 grams[/tex]

dog's mass in milligrams is given by [tex]20.1\times 10^6 milli grams=20100000 milligrams= 20.1\times 10^6 milligrams[/tex]

dog's mass in micrograms is given by

[tex]20.1\times 10^9 micro grams=20100000000 micrograms= 20.1\times 10^9 micrigrams[/tex]

Answer:

At the origin (x' = 0 m)

Explanation:

Note: From the question, when the cart travels towards the origin, the magnitude of its exact position reduces with time.

The formula of speed is given as

S = d/t................. Equation 1

Where S = speed of the cart, d = distance covered by the cart over a certain time. t = time taken to cover the distance.

make d the subject of the equation,

d = St ................. Equation 2

Given: S = 2.0 m/s, t = 3.0 s

Substitute into equation 2

d = 2(3)

d = 6 m.

From the above, the cart covered a distance of 6 m in 3 s.

The exact position of the cart = Initial position-distance covered

x' = x-d............ Equation 3

Where x' = exact position of the cart 3 s later, x = initial position of the cart, d = distance covered by the cart in 3.0 s.

Given: x = +6.0 m, d = 6 m.

Substitute into equation 3

x' = +6-6

x' = 0 m.

Hence the cart will be at 0 m (origin) 3 s later

The cart will be at a position of 12.0 m after 3.0 seconds.

The cart is initially at a position of +6.0 m and is moving towards the origin with a constant speed of 2.0 m/s. We can use the formula for position to find its exact position after 3.0 seconds.

The formula for position is position = initial position + (velocity × time).

Plugging the values into the formula, we get:

position = 6.0 m + (2.0 m/s × 3.0 s) = 6.0 m + 6.0 m = 12.0 m.

https://brainly.com/question/21340597

#SPJ3