Answer:
once they are leaked into the environment, could cause serious health hazards to all living organisms
Answer:
can do all of these
Explanation:
A radioactive material may exist in any given state of matter; solid, liquid or gas. Some radioactive materials have very long half lives. Half life refers to the period of time it takes for the amount of radioactive material in a sample to decrease by half of its original content of radioactive material.
Most radioactive materials produce ionizing radiation which causes ill effects on human and animal cells.
Choose the atom with the largest atomic radius. CI, S, Na,SI
Answer:
Na
Explanation:
Cl, S and Na are all in the same period.
The further left an element is in a row of the periodic table, the larger its atomic radius.
Answer:
Na
Explanation:
The element that has the greatest electronegativity is
Hello There!
On the periodic table, fluorine is the most electronegative element. On the periodic table, its symbol is F.
ATOMIC NUMBER "9"
ATOMIC MASS "18.998404" (19)
NEUTRONS "19-10=9" (9)
PROTONS "9"
ELECTRONS "9"
Fluorine is corrosive and a pale yellow gas.
How do van der waals forces hold molecules together?
Answer:
Electrostatic Van de Waals forces act between molecules to form weak bonds. The types of Van der Waals forces, strongest to weakest, are dipole-dipole forces, dipole-induced dipole forces and the London dispersion forces. The hydrogen bond is based on a type of dipole-dipole force that is especially powerful. These forces help determine the physical characteristics of materials.
Van der Waals forces are weak intermolecular forces caused by temporary dipoles due to electron density fluctuations, playing a crucial role in the structure of proteins and the behavior of non-ideal gases.
Van der Waals forces are residual forces that hold molecules together. Unlike strong covalent or ionic bonds, these intermolecular forces are relatively weak and are caused by slight fluctuations in electron densities within molecules. These fluctuations lead to temporary dipoles, allowing molecules to attract each other when they are in very close proximity. Van der Waals forces include attractions between permanent dipoles, induced dipoles, and instantaneous dipoles.
These weak attractions are essential for the three-dimensional structure of proteins in our cells, contributing to their proper function alongside covalent, ionic, and hydrogen bonds. The van der Waals force is likened to Velcro®, where individual interactions are weak, but collectively they can have a significant effect. This is an important concept when considering the behavior of real gases versus the ideal gas model, where van der Waals forces are not accounted for.
In a gas, as two molecules approach each other, their electron densities interact, causing temporary dipoles and resultant attractions between the molecules. These interactions are termed van der Waals forces and are critical for understanding the properties of gases and many biological molecules.
What is the percent by mass of oxygen in fe2o3
The energy from 0.02 moles of butane is used to heat 328 grams of water. The temperature of the water rose from 298 K to 343 K. (The specific heat capacity of water is 4.18 J/K g.) What is the enthalpy of combustion? A. 1,578.01 J B. 3,084,840.0 J C. 23,513,336 J
Answer:
c
Explanation:
C4H10 + 13/2 O2 = 4CO2 + 5H2O
0.02 = 328*4.18*45
1= x
making x the subject of the formula you'll get 3084840.0J
Answer:
B) The enthalpy of combustion = 3,084,840 J
Explanation:
Given:
Moles of butane = 0.02
Mass of water, m = 328 g
Initial temperature T1 = 298 K
Final temperature T2 = 343 K
Specific heat of water, c = 4.18 J/g-K
To determine:
Enthalpy of combustion
Explanation:
Heat lost during combustion of butane = heat gained by water
Heat gained (q) by water is given as:
q = mc\Delta T = mc(T2-T1)
substituting for m, c, T2 and [tex]q = 328g*4.18J/g-K*(343-298)K = 61697.8 \ J[/tex]T1
[tex]Enthalpy \ of \ combustion = \frac{q}{moles\ of\ butane} \\\\= \frac{61697.8}{0.02} = 3,084,890\ J[/tex]
Insoluble substances can dissolve in all solvents. True or false
Answer:
The answer to your question is False.
Explanation:
An insoluble substance cannot dissolve
Final answer:
The statement is false; insoluble substances by definition do not readily dissolve in solvents, and solubility depends on the 'like dissolves like' principle where substances dissolve in solvents with similar intermolecular forces.
Explanation:
The statement that insoluble substances can dissolve in all solvents is false. An insoluble substance is defined as a solute that does not dissolve in a solvent. While it is true that no solid is perfectly insoluble and most have some small level of solubility in a solvent, the term 'insoluble' is used to describe substances that do not dissolve to any significant extent. The solubility of a substance largely depends on the similarity in intermolecular forces between the solute and the solvent, which is summarized by the rule 'like dissolves like'.
Nonpolar substances are generally soluble in nonpolar solvents, whereas polar and ionic substances are more likely to dissolve in polar solvents. For example, table salt (NaCl), which is ionic, dissolves well in water because they are both polar. However, nonpolar substances, such as oil, do not mix with water because they are not soluble in polar solvents. Moreover, there are scenarios where an 'insoluble' substance can exhibit a degree of solubility due to the hydrotropic action of water, enabling otherwise insoluble substances to dissolve at least slightly in water.
In summary, some substances can dissolve to an extent in certain solvents due to the 'like dissolves like' principle, but insoluble substances by definition do not dissolve readily in any solvents to form true solutions.
Let an n-protic acid be an acid that can donate n hydrogen ions and has the formula HnX. If 0.600 L of 0.400 M sodium hydroxide is required to titrate 0.400 L of a 0.300 M HnX to the equivalence point, what is n in HnX?
Answer:
2, the acid is H₂X.
Explanation:
It is known at equivalence point: the no. of millimoles of base is equal to the no. of millimoles of acid.∴ (nMV) of NaOH = (nMV) for HnX.
where, n is the no. of producible H⁺ or OH⁻ of the acid or base, respectively.
M is the molarity of the acid or base.
V is the volume of the acid or base.
For NaOH:n = 1, M = 0.4 M, V = 0.6 L.
For HnX:n = ???, M = 0.3 M, V = 0.4 L.
∴ n for HnX = (nMV) of NaOH / (MV) for HnX = (1)(0.4 M)(0.6 L)/(0.3 M)(0.4 L) = 2.
∴ the acid is H₂X.
The value of n in HnX is 1, making it a monoprotic acid.
Explanation:This question is related to acid-base titration. In this case, 0.400 L of a 0.300 M HnX is being titrated with 0.600 L of 0.400 M sodium hydroxide (NaOH) to the equivalence point.
From the given information, we can use the concept of stoichiometry to determine the value of n in HnX. Since NaOH is a strong base and reacts with HnX in a 1:1 ratio, we can set up the following equation:
0.400 L x 0.300 M HnX = 0.600 L x 0.400 M NaOH
Solving for n, we find that n = 1. Therefore, HnX is a monoprotic acid.
Learn more about Acid-base titration here:https://brainly.com/question/40172894
#SPJ11
Which activity describes an application of topographic maps? Check all that apply.
recreation, such as camping and hiking
engineering, such as the construction of roads and buildings
science, such as mapping stars in the sky
business, such as analyzing population centers
science, such as analyzing surface features
Answer:
Option (1), (2) and (5)
Explanation:
Topographic maps are those that illustrate the surface features of different areas. It provides detailed information about an area such as the relief, hills, basins, rivers, and mountains and is constructed in both small and large scale. These maps are often used by geographers and geologists to study about any particular area.
In the given question, these topographic maps are used for recreation purposes including camping, hiking that enables them to lead the path. It is also used by the engineering geologist and engineers for the construction of roads and railways, buildings and houses, as the more resistant and reliable surfaces are traced out and used for these purposes. And mostly used by the geologists in order to understand how these surface features like folds, faults, mountains, and valleys have formed and evolved with the increasing time.
Hence the correct answers are option (1), (2) and (5)
Answer:
1,2 and 5
Explanation:
_____ is A property is a characteristic of a substance that can be observed and does not change the identity of the substance.
Fluorine has nine protons and nine electrons. It is in column 17 on the periodic table. How many valence electrons does hydrogen have? 2 5 7 9
Answer:
Hydrogen has one electron
Explanation:
Hydrogen is the first element in the Periodic Table, so it has only one valence electron.
For elements in Groups 13 to 18, then number of valence electrons equals the Group number – 10.
Fluorine is in Group 17, so it has seven valence electrons.
Answer:
7 i just did the test and got it right
Explanation:
Which aqueous solution of KI freezes at the lowest temperature? 1) 1 mol of KI in 500. g of water
2) 2 mol of KI in 500. g of water
3) 1 mol of KI in 1000. g of water
4) 2 mol of KI in 1000. g of water
Answer:
2) 2 mol of KI in 500. g of water.
Explanation:
Adding solute to water causes depression of the boiling point.The depression in freezing point (ΔTf) can be calculated using the relation:
ΔTf = i.Kf.m,
where, ΔTf is the depression in freezing point.
i is the van 't Hoff factor.
van 't Hoff factor is the ratio between the actual concentration of particles produced when the substance is dissolved and the concentration of a substance as calculated from its mass. For most non-electrolytes dissolved in water, the van 't Hoff factor is essentially 1. (i for KCl = 2/1 = 2).
Kf is the molal depression constant of water (Kf = 1.86°C/m).
m is the molality of the solution.
All parameters (i, and Kf) are constant, m is the variable.ΔTf ∝ m.
molality (m) of a solution is the no. of moles of dissolved solute in a 1.0 kg of the solvent.
We need to calculate the molality of each solution:
1) 1 mol of KI in 500. g of water :
m of this solution = (no. of moles)/(mass of the solution(kg) = (1.0 mol)/(0.5 kg) = 2 m.
∴ ΔTf = i.Kf.m = (2)(1.86°C/m)(2 m) = 7.44°C.
∴ Freezing point of the solution = 0.0°C - 7.44°C = - 7.44°C.
2) 2 mol of KI in 500. g of water :
m of this solution = (no. of moles)/(mass of the solution(kg) = (2.0 mol)/(0.5 kg) = 4 m.
∴ ΔTf = i.Kf.m = (2)(1.86°C/m)(4 m) = 14.88°C.
∴ Freezing point of the solution = 0.0°C - 14.88°C = - 14.88°C.
3) 1 mol of KI in 1000. g of water :
m of this solution = (no. of moles)/(mass of the solution(kg) = (1.0 mol)/(1.0 kg) = 1 m.
∴ ΔTf = i.Kf.m = (2)(1.86°C/m)(1 m) = 3.72°C.
∴ Freezing point of the solution = 0.0°C - 3.72°C = - 3.72°C.
4) 2 mol of KI in 1000. g of water:
m of this solution = (no. of moles)/(mass of the solution(kg) = (2.0 mol)/(1.0 kg) = 2 m.
∴ ΔTf = i.Kf.m = (2)(1.86°C/m)(2 m) = 7.44°C.
∴ Freezing point of the solution = 0.0°C - 7.44°C = - 7.44°C.
So, the aqueous solution of KI freezes at the lowest temperature is:
2) 2 mol of KI in 500. g of water.
Option 2, which contains 2 mol of KI in 500 g of water, will freeze at the lowest temperature due to the highest concentration of solute particles, resulting in the largest freezing point depression.
The lowest temperature at which an aqueous solution of KI will freeze is determined by the solution that has the highest concentration of solute particles (ions) in water. Freezing point depression is directly proportional to the molality of the solution, and since KI dissociates into K+ and I- ions in water, each mole of KI will yield two moles of ions.
Comparing the options given:
Option 1 has 1 mol of KI which yields 2 mol of ions in 500 g of water.Option 2 has 2 mol of KI which yields 4 mol of ions in 500 g of water - resulting in the highest concentration and thus the largest freezing point depression.Option 3 has 1 mol of KI in 1000 g of water, so the concentration is lower than in option 1.Option 4 has 2 mol of KI in 1000 g of water, which is double the amount of water compared to option 2, leading to a lower ion concentration.Therefore, option 2 (2 mol of KI in 500 g of water) would result in the lowest freezing temperature due to having the highest concentration of ions that causes the greatest freezing point depression.
Help please, 44 to 45, calculate the answers to the following problems. Use the following equation as the basis of your calculations.
44. How many liters of CO2 would be produced if 32 grams of CH4 are combined with oxygen?
45. How many grams of H2O would be produced when the 32 grams of CH4 are burned?
Answer: 44,8 l. of CO2 and 72 g. of water will be produced
Explanation:
Answer:44.8l
Explanation:i hope u find my explanation in the attachment
Assume that 8.5 L of iodine gas (I2) are produced at STP according to the following balanced equation:
2KI(aq) + Cl2(g) → 2KCl(aq) + I2(g)
How many moles of I2 are produced?
mol
How many moles of Cl2 are used?
mol
How many grams of Cl2 (g) are used?
grams
Answer:
a) 0.38 mol.
b) 0.38 mol.
c) 26.94 g.
Explanation:
For the balanced equation:2KI(aq) + Cl₂(g) → 2KCl(aq) + I₂(g),
It is clear that 2 mol of KI react with 1 mol of Cl₂ to produce 2 mol of KCl and 1 mol of I₂.
a) How many moles of I₂ are produced?
Firstly, we need to calculate the no. of moles of 8.5 L of produced I₂:It is known that every 1.0 mol of any gas occupies 22.4 L at STP conditions.
Using cross multiplication:
1 mol of I₂ occupies → 22.4 L, at STP.
??? mol of I₂ occupies → 8.5 L, at STP.
∴ The no. of moles of I₂ produced = (1 mol)(8.5 mol)/(22.4 L) = 0.38 mol.
b) How many moles of Cl₂ are used?
Using cross multiplication:
1 mol of Cl₂ produces → 1 mol of I₂, from stichiometry.
∴ 0.38 mol of Cl₂ produces → 0.38 mol of I₂.
So, the no. of moles of Cl₂ are used = 0.38 mol.
c) How many grams of Cl₂(g) are used?
∴ The "no. of grams" of Cl₂(g) are used = (no. of moles of Cl₂)(molar mass of Cl₂) = (0.38 mol)(70.9 g/mol) = 26.94 g.
Which of the following is the best explanation why some reactions appear to stop before all the reactants are converted to products?
The reaction goes to completion.
The reaction reaches equilibrium and the products stop being formed.
The reversible reaction occurs at the same rate.
The limiting reactant prevents the forward reaction occurring.
Answer:
I think its The reaction reaches equilibrium and the products stop being formed.
Answer:
Option C is true.
Explanation:
We are given that some reactions appear to stop before all the reactants are converted to products
We have to find the best explanation in given option why some reactions appear to stop before all the reactant are converted to products.
Reverse reaction : It is defined as the reaction in which reactants and products exist in a state of equilibrium.
Rate of froward reaction is equal to rate of backward reaction when the reaction is in equilibrium condition.
The reaction is not actually stop but it appear that the reaction to stop before all the reactants are concerted to products.
Hence, the reversible reaction occurs at the same rate occurs at the rate is best explanation for some reaction appear to stop before all the reactants are converted to products.
Option C is true.
Which of these compounds is a product of protein synthesis?
A. hydrogen
B. Water
C. Carbon dioxide
D. Oxygen
An engineer wants to determine an efficient method for condensing large amounts of steam into liquid water. Which constant should she use?
Hfus
–Hvap
Hvap
–
Answer:
The second choice: - Hvap.Explanation:
Condensing steam into liquid water is the reverse process of vaporizing liquid water into steam.
The heat or enthalpy of vaporization, also called latent heat of vaporization, of liquid water is the amount of heat that the water absorbs when changes from liquid state to steam (vapour) at certain pressure and it is a constant at every pressure.
The symbol of the latent heat of vaporization is Hvap or ΔHvap.
Thus, being being condensing the reverse process of vaporization, the heat of condensing will be the same magnitude but in reverse direction, i.e. the heat will be released instead of absorbed, and the engineer will have to use the negative of the latent heat of vaporization: - Hvap or - ΔHvap.
Answer:
b) -hvap
Explanation:
edge 2021
A baseball player hits a ball. Which is the best description of the energy of the ball as it flies over the pitcher's head? chemical mechanical kinetic thermal
Answer:
The answer is KINETIC energy
Explanation:
The baseball is moving and Kinetic energy correlates to movement.
How do you know when a chemical reaction has occurred
Answer:
The Substance Has Changed and Has Become Something Else
Explanation:
When a chemical reaction occurs it has a few characteristics, for example burning. The substance, paper, becomes something else, ash. The ash can no longer be turned back into paper. Another example is rust, once and object is rust due to oxidation it can no longer return back. A physical reaction on the other hand can be reversed, like freezing. To spot chemical change look for color changing, gas production, a change in temperature, or if you see any light.
Use the standard enthalpies of formation for the reactants and products to solve for the ΔHrxn for the following reaction. (The ΔHf of C2H4 is 52.26 kJ/mol, CO2 is -393.509 kJ/mol, and H2O is -241.818 kJ.) C2H4 (g) + 3O2(g) 2CO2 (g) + 2H2O(g)
ΔHrxn =
The reaction is .
Answer: The enthalpy change of the reaction is -1322.91 kJ
Explanation:
The chemical equation for the combustion of propane follows:
[tex]C_2H_4(g)+3O_2(g)\rightarrow 2CO_2(g)+2H_2O(g)[/tex]
The equation for the enthalpy change of the above reaction is:
[tex]\Delta H^o_{rxn}=[(2\times \Delta H^o_f_{(CO_2(g))})+(2\times \Delta H^o_f_{(H_2O(g))})]-[(1\times \Delta H^o_f_{(C_2H_4(g))})+(3\times \Delta H^o_f_{(O_2(g))})][/tex]
We are given:
[tex]\Delta H^o_f_{(H_2O(g))}=-241.818kJ/mol\\\Delta H^o_f_{(O_2(g))}=0kJ/mol\\\Delta H^o_f_{(CO_2(g))}=-393.509kJ/mol\\\Delta H^o_f_{(C_2H_4(g))}=52.26kJ/mol[/tex]
Putting values in above equation, we get:
[tex]\Delta H^o_{rxn}=[(2\times (-393.509))+(2\times (-241.818))]-[(1\times (52.26))+(3\times (0))]\\\\\Delta H^o_{rxn}=-1322.91kJ[/tex]
Hence, the enthalpy change of the reaction is -1322.91 kJ
Where in the lungs does gas exchange occur
Answer: Between the alveoli and a network of tiny blood vessels called capillaries, which are located in the walls of the alveoli.
Gas exchange in the lungs occurs in the alveoli. Oxygen diffuses from the alveoli into the blood, while carbon dioxide diffuses from the blood into the alveoli.
Gas exchange in the lungs, also referred to as pulmonary gas exchange, primarily occurs in the alveoli. The alveoli are tiny, grape-like clusters surrounded by networks of thin-walled pulmonary capillaries.
Here is a step-by-step explanation of the gas exchange process:
When you inhale, air enters the alveoli, which have a higher concentration of oxygen compared to the blood in the surrounding capillaries.Oxygen diffuses from the alveoli into the blood because of this concentration gradient.Conversely, the blood in the capillaries has a higher concentration of carbon dioxide than the alveoli, causing carbon dioxide to diffuse into the alveoli.This exchange of gases allows oxygenated blood to travel through the pulmonary veins to the rest of the body, while carbon dioxide is expelled when you exhale.The vast number of alveoli (around 300 million per lung) provides a large surface area, maximizing the efficiency of gas exchange.
At an ocean depth of 76.2 m, the pressure is about 8.4 atm. Convert the pressure to mmHg and torr units.
Final answer:
To convert 8.4 atm to mmHg and torr, multiply by 760 resulting in a pressure of 6384 mmHg and 6384 torr, as 1 torr equals 1 mmHg.
Explanation:
To convert the pressure at an ocean depth of 76.2 m, which is about 8.4 atm, into mmHg and torr units, we use the conversion factor 1 atm = 760 mmHg = 760 torr. For the presented example, the calculation would be:
Pressure in mmHg = 8.4 atm × 760 mmHg/atm = 6384 mmHg
Since 1 torr is exactly equivalent to 1 mmHg, this also means that:
Pressure in torr = 6384 torr
Thus, the pressure at an ocean depth of 76.2 m, when expressed in mmHg and torr, is 6384 mmHg and 6384 torr, respectively.
Two liquids are poured into a beaker. After a few seconds, the beaker becomes warm.
Which of the following best describes this reaction?
A. an exothermic reaction
B. a decomposition reaction
C. an endothermic reaction
D. a single-displacement reaction
Answer:
A. an exothermic reaction
Explanation:
an exothermic reaction releases energy in the form of heat, therefore making the beaker warm.
Answer: A. an exothermic reaction
Explanation:
A. Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat. The temperature of the vessel rises.
B. Decomposition is a type of chemical reaction in which one reactant gives two or more than two products.
Example: [tex]Li_2CO_3\rightarrow Li_2O+CO_2[/tex]
C. Single displacement reaction is a chemical reaction in which more reactive element displaces the less reactive element from its salt solution.
Example: [tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]
D. Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat.The temperature of the vessel drops.
What is the IMA of the 1 st class lever in the graphic given?
2
3
0.5
Answer:
I believe the answer isT 2.
Explanation:
he formula for IMA of a first-class lever is effort-distance/resistance-distance.
Answer:
IMA = 2
Explanation:
IMA= din/dout
IMA= 3/1.5
IMA= 2
ListenBase your answer to the question on the information below.Soil pH can affect the development of plants. For example, a hydrangea plant produces blue flowers when grown in acidic soil but pink flowers when grown in basic soil. Evergreen plants can show a yellowing of foliage, called chlorosis, when grown in soil that is too basic.Acidic soil can be neutralized by treating it with calcium hydroxide, Ca(OH)2, commonly called slaked lime. Slaked lime is slightly soluble in water.Which equation correctly shows the neutralization of the ions in acidic soil by the ions released by slaked lime in water?Ca(OH)2(s) + H2O → Ca(OH)2(aq)H3O+(aq) + OH−(aq) → 2H2O(l)Ca(OH)2(s) + H2O → Ca+2 + 2OH−2H2O(l) → H3O+(aq) + OH−(aq)
Answer:
[tex]\boxed{\text{H$_{3}$O$^{+}$ + OH$^{-} \longrightarrow$ 2H$_{2}$O}}[/tex]
Explanation:
1. "Molecular" equation
[tex]\rm Ca(OH)$_{2}$ + 2H$_{3}$O$^{+} \longrightarrow \,$ Ca$^{2+}$ + 4H$_{2}$O[/tex]
2. Ionic equation
[tex]\rm \textbf{Ca}$^{2+}$ + 2OH$^{-}$ + 2H$_{3}$O$^{+}$ \longrightarrow \textbf{Ca}$^{2+}$ + 4H$_{2}$O[/tex]
3. Net ionic equation
Cancel all ions that appear on both sides of the reaction arrow (in boldface).
[tex]\rm 2OH$^{-}$ + 2H$_{3}$O$^{+} \longrightarrow$ 4H$_{2}$O[/tex]
Divide every coefficient by 2.
[tex]\rm OH$^{-}$ + H$_{3}$O$^{+} \longrightarrow$ 2H$_{2}$O[/tex]
Rank the compounds below from slowest to Fastest rate of hydration. 1) formaldehyde 2) 3,3-dimethyIbutan-2-one 3) propanal 4)3-methylbutan-2-one 5) butan-2-one
The compounds ranked from the slowest to fastest rate of hydration are 3,3-dimethylbutan-2-one, 3-methylbutan-2-one, butan-2-one, propanal, and formaldehyde. Steric hindrance plays a crucial role in determining the reactivity of carbonyl compounds towards nucleophilic hydration reactions.
The rate of hydration for carbonyl compounds, such as aldehydes and ketones, is influenced by their reactivity towards nucleophilic attack. This reactivity is mainly determined by the electron-withdrawing or -donating nature of substituents on the carbonyl carbon and steric effects.
In this context, we can rank the compounds based on their rates of hydration:
Formaldehyde (CH2O): Formaldehyde is the simplest aldehyde, and its high reactivity is attributed to the lack of steric hindrance. The absence of bulky substituents allows nucleophiles to approach the carbonyl carbon easily, resulting in a fast rate of hydration.
Propanal (CH3CH2CHO): Propanal has a moderately reactive carbonyl group. The presence of a linear alkyl chain provides some steric hindrance compared to formaldehyde, slowing down the hydration rate slightly.
Butan-2-one (CH3COCH2CH3): Butan-2-one, also known as methyl ethyl ketone, has a more substituted carbonyl carbon due to the ethyl group. This increased steric hindrance results in a slower rate of hydration compared to propanal.
3-Methylbutan-2-one (CH3COCH(CH3)2): The presence of a branched methyl group in the 3-position introduces additional steric hindrance. This bulky substituent slows down the nucleophilic attack, leading to a slower rate of hydration.
3,3-Dimethylbutan-2-one (CH3COCH(CH3)2CH3): This compound has the highest steric hindrance among the given options due to two methyl groups in the 3-position. The bulkiness significantly hinders the approach of nucleophiles, resulting in the slowest rate of hydration.
Hydration rates are influenced by steric hindrance and the reactivity of the molecule. Formaldehyde is the fastest to hydrate due to minimal steric hindrance and high reactivity, while 3,3-dimethylbutan-2-one, having the most steric hindrance, is the slowest.
Explanation:When ranking the compounds from slowest to fastest rate of hydration, we need to consider the factors that affect hydration rates such as structure, size, and functional group. Hydration involves the addition of water to the compound, and this process is generally faster for molecules that can better stabilize the transition state. Formaldehyde is highly reactive and can form a hydrate readily, despite its small size, due to its high reactivity and the lack of steric hindrance. For ketones, increased steric hindrance and a decrease in polarization of the carbonyl group result in slower hydration rates.
Based on these considerations, the ranking from slowest to fastest rate of hydration for the given compounds would be: 3,3-dimethylbutan-2-one (most steric hindrance and least reactive), 3-methylbutan-2-one, butan-2-one, propanal, and formaldehyde (least steric hindrance and most reactive).
What is the formula for heat of fusion?
Answer:
The formula used to calculate heat of fusion:
q = m·ΔH f
Explanation:
The formula used to calculate heat of fusion:
q = m·ΔH f
Answer:
q = m·ΔH f
Explanation:
What phase of matter has particles that are held together but can flow past each other and takes the shape of a container, filling it from the bottom up?
Answer:
Liquid
Explanation:
Liquid has particles that are held together but can flow past each other and takes the shape of a container, filling it from the bottom up.
Hope this helps!
Answer: Liquid
Explanation:
Solid state : It is a state in which the particles are closely packed and does not have any space between them. They have least kinetic energy due to restricted movement. This state has a definite shape and volume.
Liquid state : It is a state in which the particles are present in random and irregular pattern. The particles are closely arranged but they can move from one place to another and thus have higher kinetic energy as compared to solids. This state has a definite volume but does not have a fixed shape. It takes the shape of the container.
Gaseous state : It is a state in which the particles are loosely arranged and have a lot of space between them. They have highest kinetic energy. This state has indefinite volume as well as shape.
Thus the phase mentioned is liquid phase.
Compare and contrast solutions and suspensions
Contrast:
Solutions are clear, transparent, and homogeneous.
Suspensions are cloudy, heterogeneous, and at least two substances are visable
Compare: one similarity is that neither of their particles settle.
An unknown substance has been shown to have weak covalent bonds.
Which of the following is most likely a property of this substance?
A. high pH
B. high conductivity
C. low melting point
D. low flammability
Answer:
Low melting point.
Explanation:
We cannot link the pH of a substance from it bonds directly.
Ionic compounds have strong ionic bonds but we cannot say that they will have high or low pH.
High conductivity is a feature of ionic compounds generally (also metals)
low melting point means the bonds are weak so they can be weak covalent bonds.
Low flammability is not related to bonding.
1) In saturated limewater, [H+ ]=3.98x10-13 M.
a) Find [OH]-/
b) What is the pH?/
c) Is the solution acidic, basic, or neutral?/
2) In butter, [H+ ]=6.0x10-7 M.
a) Find [OH]-/
b) What is the pH?/
c) Is the solution acidic, basic, or neutral?/
3) In peaches, [OH]=3.16x10-11 M
a) Find [H+ ]/
b) What is the pH?/
c) Is the solution acidic, basic, or neutral?/
4) During the course of the day, human saliva varies between being acidic and basic. If [OH]=3.16x10-8 M,
a) Find [H+ ]/
b) What is the pH?/
c) Is the solution acidic, basic, or neutral?/
Answer:
1) a) [OH⁻] = 0.025 M.
b) pH = 12.4.
c) The solution is basic.
2) a) [OH⁻] = 1.66 x 10⁻⁸ M.
b) pH = 6.22.
c) The solution is acidic.
3) a) [H⁺] = 3.16 x 10⁻⁴ M.
b) pH = 3.5.
c) The solution is acidic.
4) a) [H⁺] = 3.16 x 10⁻⁷ M.
b) pH = 6.5.
c) The solution is acidic.
Explanation:
1) In saturated lime water, [H⁺] = 3.98 x 10⁻¹³ M.
a) Find [OH⁻]
∵ [H⁺][OH⁻] = 10⁻¹⁴.
∴ [OH⁻] = 10⁻¹⁴/[H⁺] = 10⁻¹⁴/(3.98 x 10⁻¹³ M) = 0.025 M.
b) What is the pH?
∵ pH = - log[H⁺].
[H⁺] = 3.98 x 10⁻¹³ M.
∴ pH = - log(3.98 x 10⁻¹³ M) = 12.4.
c) Is the solution acidic, basic, or neutral?
We can determine the nature of the solution, acidic, basic or neutral, from the value of the pH.pH is a scale from 0 to 14.
If pH < 7, the solution is acidic.If pH = 7, the solution is neutral.If pH > 7, the solution basic.∵ pH = 12.4 > 7.
∴ The solution is basic.
2) In butter, [H⁺] = 6.0 x 10⁻⁷ M.
a) Find [OH⁻]
∵ [H⁺][OH⁻] = 10⁻¹⁴.
∴ [OH⁻] = 10⁻¹⁴/[H⁺] = 10⁻¹⁴/(6.0 x 10⁻⁷ M) = 1.66 x 10⁻⁸ M.
b) What is the pH?
∵ pH = - log[H⁺].
[H⁺] = 6.0 x 10⁻⁷ M.
∴ pH = - log(6.0 x 10⁻⁷ M) = 6.22.
c) Is the solution acidic, basic, or neutral?
We can determine the nature of the solution, acidic, basic or neutral, from the value of the pH.pH is a scale from 0 to 14.
If pH < 7, the solution is acidic.If pH = 7, the solution is neutral.If pH > 7, the solution basic.∵ pH = 6.22 < 7.
∴ The solution is acidic.
3) In peaches, [OH⁻] = 3.16 x 10⁻¹¹ M
a) Find [H⁺]
∵ [H⁺][OH⁻] = 10⁻¹⁴.
∴ [H⁺] = 10⁻¹⁴/[OH⁻] = 10⁻¹⁴/(3.16 x 10⁻¹¹ M) = 3.16 x 10⁻⁴ M.
b) What is the pH?
∵ pH = - log[H⁺].
[H⁺] = 3.16 x 10⁻⁴ M.
∴ pH = - log(3.16 x 10⁻⁴ M) = 3.5.
c) Is the solution acidic, basic, or neutral?
We can determine the nature of the solution, acidic, basic or neutral, from the value of the pH.pH is a scale from 0 to 14.
If pH < 7, the solution is acidic.If pH = 7, the solution is neutral.If pH > 7, the solution basic.∵ pH = 3.5 < 7.
∴ The solution is acidic.
4) During the course of the day, human saliva varies between being acidic and basic. If [OH⁻] = 3.16 x 10⁻⁸ M,
a) Find [H⁺]
∵ [H⁺][OH⁻] = 10⁻¹⁴.
∴ [H⁺] = 10⁻¹⁴/[OH⁻] = 10⁻¹⁴/(3.16 x 10⁻⁸ M) = 3.16 x 10⁻⁷ M.
b) What is the pH?
∵ pH = - log[H⁺].
[H⁺] = 3.16 x 10⁻⁷ M.
∴ pH = - log(3.16 x 10⁻⁷ M) = 6.5.
c) Is the solution acidic, basic, or neutral?
We can determine the nature of the solution, acidic, basic or neutral, from the value of the pH.pH is a scale from 0 to 14.
If pH < 7, the solution is acidic.If pH = 7, the solution is neutral.If pH > 7, the solution basic.∵ pH = 6.5 < 7.
∴ The solution is acidic.