5. A salvage operator recovered coins believed to be gold. A sample weighed 129.6 g and had a volume of 15.3 cm3. Were the coins gold (d= 19.3 g/cm3) or just yellow brass (d= 8.47 b/cm3)?

Answers

Answer 1

Answer:

Therefore the coins were of yellow brass.

Explanation:

A sample weighted 129.6 g and had a volume of 15.3 cm³.

[tex]Density =\frac{mass }{volume}[/tex]

Here mass= 129.6 g and volume =15.3 cm³.

[tex]Density =\frac{129.6}{15.3}[/tex] g/cm³

             =8.47 g/cm³

Given that the density of gold = 19.3 g/cm³

and density of yellow brass = 8.47 g/cm³

Since the density of the sample is equal to the density of yellow brass.

Therefore the coins were of yellow brass.

Answer 2
Final answer:

The density of the coins sampled is 8.47 g/cm3, which is the same as the density of brass and much less than the density of gold, 19.3 g/cm3. The coins are therefore made of brass not gold.

Explanation:

To determine if the coins are gold or brass, you need to calculate the density of the sample and compare it to the known densities of gold and brass. The density can be calculated by dividing the mass by the volume.

So, density = mass/volume = 129.6 g / 15.3 cm3 = 8.47 g/cm^3.

The density of the sample is identical to the density of brass, 8.47 g/cm^3, and much less than the density of gold, 19.3 g/cm3. Therefore, the coins are made of brass not gold.

Learn more about Density here:

https://brainly.com/question/34199020

#SPJ3


Related Questions

A compound is found to contain 73.23% xenon name 26.77% oxygen by mass. What is the empirical formula for this compound ?

Answers

The empirical formula is XeO₃.

Explanation:

Assume 100 g of the compound is present. This changes the percents to grams:

Given mass in g:

Xenon = 73.23 g

Oxygen = 26.77 g

We have to convert it to moles.

Xe = 73.23/   131.293 = 0.56 moles

O = 26.77/ 16 = 1.67 moles

Divide by the lowest value, seeking the smallest whole-number ratio:

Xe = 0.56/ 0.56 = 1

O = 1.67/ 0.56 = 2.9 ≈3

So the empirical formula is XeO₃.

The following properties are either physical or chemical. Which one is different from the rest based on those two categories?

Boiling point

Flammability

Magnetism

Thermal conductivity

Answers

The property that is different from the rest based on the categories of physical and chemical properties is Boiling point.

Boiling point is a physical property because it is associated with the phase change of a substance from liquid to gas and does not involve a change in the chemical composition of the substance. It is a characteristic of a substance that can be measured at a specific pressure and is used to identify substances.

Flammability is a chemical property because it involves a chemical reaction, specifically combustion, where the substance reacts with oxygen to produce heat and light. This reaction results in the formation of new substances with different chemical compositions.

Magnetism is considered a physical property as it pertains to the behavior of a substance in the presence of a magnetic field. It does not involve a change in the chemical composition of the material.

Thermal conductivity is also a physical property. It measures the ability of a material to conduct heat and is a characteristic that can be measured without changing the chemical identity of the substance.

In summary, boiling point, magnetism, and thermal conductivity are physical properties, while flammability is a chemical property. Boiling point is the one that is different from the rest in terms of the physical and chemical property categories


A sample of a gas is placed inside a cylinder that is a led size. The cylinder is heated as additional gas
is added to it. What will most likely happen to the pressure of the gas inside the cylinder?
It will decrease.
It will increase.
It will not change.

Answers

Final answer:

When a gas in a fixed-volume cylinder is heated and additional gas is added, the pressure of the gas will most likely increase due to more frequent and forceful collisions of gas molecules with the container's walls.

Explanation:

The question is about what will happen to the pressure of the gas inside a cylinder when it is heated and additional gas is added. According to the principles of gas laws, specifically the combined gas law, which is related to pressure (P), volume (V), and temperature (T) of a gas, the pressure of the gas will increase if the temperature of the gas increases while the volume remains constant.

When the number of gas molecules is increased in a fixed volume, there is less space for the molecules to move, which means they will collide with the walls of the container more frequently, leading to an increase in pressure. Additionally, heating the gas will increase the kinetic energy of the molecules, resulting in more forceful collisions and therefore an increase in pressure.

How many zinc atoms are there in 65.4 g?

Answers

molar mass of Zn is 65.38 g/mol≅65.4 g/mol

65.4 g Zn* 1 mol Zn/64.4g* (6.022*10^23) atoms/1 mol Zn

hence, there are 6.022*10^23 atoms

If the pressure of a fixed mass of gas is doubled at a constant temperature, the
volume of the gas will be:
1/4 as much.
O twice as much
half as much
the same.

Answers

Answer: half as much .hope this helped

Explanation:

Meiosis is significant to most living organisms because it:
A. keeps prokaryotic organisms separate from eukaryotic organisms.
O
B. allows sexual reproduction to maintain the diploid chromosome
number.
O
c. makes gametes with four times the haploid number of the
species.
D. causes the chromosome number of a species to change when it
needs to.

Answers

The significance of meiosis in living organisms is that it allows sexual reproduction to maintain the diploid chromosome number by producing haploid gametes, which upon fertilization, restore the diploid condition.

Meiosis is significant to most living organisms because it allows sexual reproduction to maintain the diploid chromosome number. In sexual reproduction, genetic material from two individuals is combined to produce genetically diverse offspring. The process of meiosis is a series of events that arrange and separate chromosomes into cells, thereby reducing the chromosome number by half to produce haploid gametes. Fertilization then involves the fusion of these haploid gametes from two individuals to restore the diploid condition in the new zygote, hence, maintaining the species' chromosome number through generations.

The correct answer to the student's question is B. allows sexual reproduction to maintain the diploid chromosome number. This answer is supported by the understanding that meiosis produces genetically unique reproductive cells, called gametes, which have half the number of chromosomes as the parent cell. When two gametes fuse, they restore the original diploid state of the organism's chromosomes.

When a chemical reaction occurs,
the physical and chemical properties of the reactants are the same as the properties of the products
the compounds can be separated by physical means
O a phase change takes place
the physical and chemical properties of the products are different from the reactants​

Answers

Let us study about chemical reaction

Explanation:

Chemical reaction '

It is a reaction in which two or more substances react to form some new substance .

The substances that react are called "reactants " and the new ones that are formed are called "products ".

A + B ---> C + D

(reactants )    (products )

In a chemical reaction :

Reactants undergoes a chemical change .The products cant be separated by physical method .For every chemical reaction there is some identification property .During chemical reaction , energy changes occur .During chemical reaction :It is seen that  physical and chemical properties of the products are different from the reactants​

Which product is the final outcome of a nuclear generating plant? uranium heat electricity steam

Answers

Answer:

electricity

Explanation:

i took the test and got the answer right.

There can be emissions of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, electricity is the final outcome of a nuclear generating plant.

What is nuclear decay?

Nuclear decay is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle. the kinetics of decay of radioactive nuclear decay is of first order kinetics.

The rate law for first order kinetics is

K=(2.303/T)×log(a/a-x)

Where

k - rate constant

t - time passed by the sample

a - initial amount of the reactant

a-x - amount left after the decay process

Electricity is the final outcome of a nuclear generating plant. A nuclear power plant is a thermal power station in which we produce electricity using nuclear reactor.

Therefore, electricity is the final outcome of a nuclear generating plant.

To know more about nuclear decay, here:

https://brainly.com/question/21114779

#SPJ6

an acid is added to water. explain what type of bonding may take place ​

Answers

Let us learn about addition of acid to water

Explanation:

All chemical substances has certain chemical nature that is whether it is :

Acidic Basic Neutral

Acidic

It is a substance that in water produce hydrogen ions .

Like HCl ------> H⁺ + Cl⁻

When these kind of ions are released in water , they further combine with water to form hydronium ion that is :

HCl ------> H₃O⁺ + Cl⁻

                (hydronium ion)

The bonding in them is a coordinate bond that is : A bond formed between a donor and a acceptor as in it there is no mutual sharing of electrons ,Therefore it is also called as dative bond . The structure of hydronium ion is attached below .

Bases

They are those when dissolved in water produce hydroxide ion .

That is : NaOH-------> Na ⁺    + OH⁻

Determine the empirical formula for c6n4o10

Answers

Let us derive empirical formula

Explanation:

We are given with compound C₆N₄O₁₀: mass percentage of all is :

For C = 12 x 6 /288=0.25%

For N= 14 x 4 /288=0.19%

For 0= 16 x 10/288=0.5%

The elements present are :

         Atomic mass   moles                       Simplest ratio           rounding off

C      12                        0.25/12=0.020             0.02/0.02=1           2

N       14                       0.9/14=0.06                    0.06/0.02=3         6

O       16                        0.5/16=0.03                   0.03/0.02=1.5       3

The empirical formula derived is : C₂n₆O₃

3. Which inclined plane has a greater mechanical advantage? Figure A or Figure B?
Figure A
Figure B
(
Figure A has a greater mechanical advantage
Figure B has a greater mechanical advantage
Figure A and B have the same mechanical advantage
none of the above

Answers

figure B has greater mechanical advantage

Explanation:

The mechanical advantage of a machine is the ratio between the output force and the input force.

For a ramp, the (ideal) mechanical advantage of a machine is also given by the formula

[tex]MA=\frac{L}{H}[/tex]

where

L is the lenght of the ramp

H is the height of the ramp

Therefore, in order to compare the mechanical advantage of these two ramps, we have to compare their ratio L/H.

By looking at the figure, we notice that:

- Figure A has greater height H and shorter length L

- Figure B has smaller height H and longer length L

This means that the ratio L/H is larger for figure B: therefore, figure B has greater mechanical advantage.

Learn more about simple machines:

brainly.com/question/5352966

#LearnwithBrainly

* Need ASAP * Explain the relationship between percent composition, Empirical formula, and molecular formula.

Answers

By dividing the percentage composition with the molar mass of that element we will get the empirical formula. Then using that empirical formula and formula mass we can find the molecular formula.

Explanation:

The chemical properties of any substance are defined obviously by the different types and relative amounts of atoms constituting its primary entities (in case of covalent compounds the primary entities are molecules and ions in the event of ionic compounds).

A percent composition of any compound gives the mass percent of each element present in the compound; in addition to that frequently it is determined experimentally and utilized to derive an empirical formula of any compound. An empirical formula mass of any covalent compound could be comparable with the molar or molecular mass of a compound to acquire a molecular formula.

This is our main source of heat

Answers

Answer:

The sun is our main source of heat and light energy. A source is where something comes from. The heat we feel and the light we see here on Earth is mainly from our nearest star, the sun.

Explanation:

if your hot pack requires 3.0g of a solid to obtain the correct temperature change, instead of the correct amount (1.4g) calculate the percent error

Answers

Answer:

MethodsPart A – Preparation of reference hot or cold packsEach group had either hot packs (CaCl2) or cold packs (NH4NO3). Each hot/cold pack was prepared in 20.0mL of water. We used a beaker to consistently measure 20.0mL of water for each trial. We then placed 20.0mL of deionized water in a 100mL beaker. The initial temperature of thewater was measured. My lab partner and I added about 1.0 grams of calcium chloride for hot packs. After the calcium chloride was added, we stirred gently with the glass stirring rod until the solid dissolved. While doing so, we kept the thermometer in the solution and recorded the final temperature change. We monitored the temperature change closely and recorded the maximum temperature. Once that was recorded, we disposed of the solution and dried the glassware carefully. We repeated step 2 again, using 4.0 grams of solid and 8.0 grams of solid. Before beginning Part B, we completed results # 1-2.Part B- Preparation of desired hot or cold packAfter completing results #1-2, we used the answer from results #2 to prepare a 20.0mL hot pack that reached the desired temperature. Once, finished our results were shared on the board. On the board, we reported our data to the class for “grams of solid used” and “final temperature reached”.  

Explanation:

What is a hypothesis?

A. analysis based on an observation.

B. a proposed answer to a question.

C. a conclusion based on analysis.

D. data gathering during an experiment.​

Answers

a proposed answer to a question i beige

Answer:

B

Explanation: it is the correct answer

What is the mass of a cylinder of lead that is 1.80 in in diameter, and 4.12 in long. The density of lead is 11.4 g/mL.

Answers

Answer:

124.26g

Explanation:

Diameter  = 1.80 , length (h) = 4.12 , density = 11.4

Density = mass / volume

Volume = area x height

Area = #d2 ➗ 4

Where #(pi) = 3.142

Area = 3.142 x 1.80 square ➗ 4

Area = 10.2/4 = 2.6

Volume = area x height

Volume = 2.6 x 4.2=10.9

Density = mass / vol

Mass = density x vol

Mass = 11.4 x 10.9

Mass 124.26g

I hope this was helpful, Please mark as brainliest

How many moles of acetylene gas occupies a volume of 3.25 liters at STP?

Answers

Answer: 0.14 mole C2H2

Explanation: solution attached:

Derive n from PV= nR

n= PV/RT

= 1 atm ( 3.25 L) / (0.08205 L.atm/mol.K) ( 273 K)

= 0.14 mole C2H2

0.1449 moles

I hope this helps

dialysis is used to purify blood, sea water, and polluted drinking water. true or false?

Answers

True!


Explanation:
Dialysis is the separation of smaller molecules from larger molecules or of dissolved substances from colloidal particles in a solution by selective diffusion through a semipermeable membrane. The most common usage is that of blood, or kidney dialysis, but the process can be used for sea or drinking water as well.

Which of the following is the si unit of acceleration

Answers

Answer:

C

Explanation: Acceleration is defined as the rate of change of velocity with time i.e acceleration = velocity/time.

but velocity is defined as distance moved in one second i.e velocity = distance / time.

distance is measured in meter (m) and time in second (s), then, acceleration = m/s/s. which is meter/second² i.e m/s²

Final answer:

The SI unit of acceleration is meters per second squared (m/s²). It represents the rate of change of velocity per unit of time.

Explanation:

The SI unit of acceleration is metres per second squared (m/s²). It is a measure of how quickly an object changes its velocity. For instance, continue driving a car starting from rest, if your speed grows by 6 m/s every second, then your acceleration is 6 m/s². Here, 'metres per second' shows the velocity change and squaring it (second squared) shows the time duration over which this change occurs.

Learn more about SI unit of Acceleration here:

https://brainly.com/question/30888197

#SPJ6

Function C gives the cost, in dollars, of buying n apples. 6. Which statement best represents the meaning of C (10) = 9?
a. the cost of buying 9 apples
b.the cost of 9 apples is $10
c.the cost of 10 apples
d. ten apples cost $9

Answers

Answer:

D. Ten apples cost $9

Explanation:

C, the cost in dollars of buying apples is a function of the number (n) of apples bought

C (10) = $9 implies that the cost of buying 10 apples is $9

Final answer:

The statement 'C (10) = 9' means that ten apples cost $9 based on the given function C which represents the cost of buying n apples.

Explanation:

The question is asking for the interpretation of the mathematical function C(n) = 9 when n is 10. In this case, C(10) = 9 means that the cost of 10 apples is $9. This is based on the provided function C which represents the cost of buying n number of apples. So, when n is 10, the cost is 9 dollars. This interpretation is similar to how we calculate the cost of buying fruits in chapters 8 and 9, by multiply the quantity of each fruit by the price.

Learn more about Mathematical Functions here:

https://brainly.com/question/30594198

#SPJ3

amount in the lab to be 1.24g. However the accepted value is 1.30g. Calculate percent error.

Answers

Yo sup??

given value=1.24 g

expected value=1.30 g

Percentage Error=(expected value-given value/expected value)*100

=(0.06/1.3)*100

=4.62 %

Hope this helps.

Final answer:

The percent error for the chemistry experiment, given the theoretical yield (accepted value) of 1.30g and actual yield (amount in the lab) of 1.24g, is calculated to be 4.62%.

Explanation:

To calculate the percent error in this chemistry experiment, we can use the formula:

The % error of the yield = | [Theoretical Yield - Actual Yield] / Theoretical Yield x 100%|

In this case, the theoretical yield (accepted value) is 1.30g, and the actual yield (amount in the lab) is 1.24g. Applying the formula:

% error = |[1.30g - 1.24g] / 1.30g x 100% |
= |[0.06g] / 1.30g x 100% |
= | 0.046154 x 100% |
= 4.62%

Therefore, the percent error for this experiment is 4.62%.

!!HELP ASAP!! How does temperature affect the rate of a reaction?
A. Increasing the temperature lowers the activation energy of the
reaction.
B. Increasing the temperature increases the concentration of the
reactants.
C. Increasing the temperature decreases the potential energy of the
reactants.
D. Increasing the temperature gives the molecules more kinetic
energy

Answers

Answer:

D. Increasing the temperature gives the molecules more kinetic energy.

Increasing the temperature gives the molecules more kinetic energy. Hence, option D is correct.

What is the rate of a reaction?

The rate of a reaction is the speed at which a chemical reaction takes place.

Temperature is also known as the average kinetic energy of molecules.

Some atoms used to have sufficient kinetic energy to react, while others do not.

Increasing the temperature indicates that more numbers of molecules will have sufficient kinetic energy to react and reactions will take place more frequently.

Hence, increasing temperature increases the reaction rate.

Thus, option D is correct.

Learn more about the rate of reaction here:

https://brainly.com/question/8592296

#SPJ5

Calcium Oxide will react with ammonium chloride to produce ammonia gas, water vapor, and calcium chloride. If only 16.3 g of ammonia is produced from 112 g of calcium oxide and 224 g of ammonium chloride, what is the percent yield?

Answers

Answer:

                     %age Yield  =  22.72 %

Explanation:

                    The balance chemical equation is as follow;

                           2 NH₄Cl + CaO → 2 NH₃ + CaCl₂ + H₂O

Step 1: Calculate Moles of CaO, NH₄Cl and NH₃;

CaO:

        Moles  =  Mass / M.Mass

        Moles  =  112 g / 56.07 g/mol

        Moles  =  1.99 moles of CaO

NH₄Cl:

        Moles  =  Mass / M.Mass

        Moles  =  224 g / 53.49 g/mol

        Moles  =  4.18 moles of NH₄Cl

NH₃:

        Moles  =  Mass / M.Mass

        Moles  =  16.3 g / 17.03 g/mol

        Moles  =  0.95 moles of NH₃

Step 2: Calculate Limiting reagent as:

According to equation.

                   2 moles of NH₄Cl reacts with  =  1 mole of CaO

So,

              4.18 moles of NH₄Cl will react with  =  X moles of CaO

Solving for X,

                     X =  4.18 mol × 1 mol / 2 mol

                     X  =  2.09 mol of CaO

This means that none of the given reagent is limiting reagent. They both are almost equal in number of moles.

Step 3: Calculate Theoretical Yield of NH₃ as;

According to equation.

                   2 moles of NH₄Cl produced  =  2 moles of NH₃

So,

              4.18 moles of NH₄Cl will produce  =  X moles of NH₃

Solving for X,

                     X =  4.18 mol × 2 mol / 2 mol

                     X  =  4.18 mol of NH₃

Step 4: Calculate Percentage Yield as;

             %age Yield  =  Actual Yield / Theoretical Yield × 100

             %age Yield  =  0.95 mol / 4.18 × 100

             %age Yield  =  22.72 %

Final answer:

The percent yield of a reaction is calculated by dividing the actual yield by the theoretical yield and multiplying by 100. In this case, it would involve using stoichiometry to calculate the theoretical yield of NH3 from 112 g of CaO, then dividing the actual yield of 16.3 g by the theoretical yield and multiplying by 100.

Explanation:

The percent yield of a reaction is calculated by taking the actual yield (the amount actually produced by the reaction) and dividing it by the theoretical yield (the amount that could have been produced under perfect conditions), then multiplying by 100 to get a percentage. In this case, we don't have the theoretical yield, but we know that 16.3 g of ammonia gas was produced from 112 g of Calcium Oxide and 224 g of ammonium chloride.

The reaction between Calcium Oxide and ammonium chloride is: CaO + 2NH4Cl -> 2NH3 + H2O + CaCl2

First, use stoichiometry to calculate the theoretical yield of NH3 from 112 g of CaO. Then, divide the actual yield by the theoretical yield, and multiply by 100 to get the percent yield.

Learn more about Percent Yield here:

https://brainly.com/question/36893978

#SPJ3

How many grams of aluminum can react with 336g oxygen? 4Al + 3O2 --> 2Al2O3

Answers

Answer: 714 g Al2O3

Explanation: Solution attached

First convert mass of O2 to moles

Do the mole ratio between O2 and Al2O3 from the balanced equation.

Convert moles of Al2O3 to mass using its molar mass.

In a chemical reaction, 378 grams of aluminum can react with 336 grams of oxygen to form aluminum oxide, calculated using stoichiometry based on the balanced chemical equation.

The calculation of how many grams of aluminum can react with 336g of oxygen involves using stoichiometry, a technique in chemistry to calculate amounts of reactants and products.

The balanced chemical equation given is 4Al + 3O2 ⇒2Al2O3. First, we need to find the number of moles of oxygen by dividing the given mass of oxygen by its molar mass (32 g/mol for O2, thus 16 g/mol for O). Next, using the mole ratio from the balanced equation, calculate the moles of aluminum required to react with the obtained moles of oxygen. Finally, convert the moles of aluminum to grams using the molar mass of aluminum (27 g/mol).

The process will involve these steps:

Find moles of O2: 336 g O2 × (1 mol O2 / 32 g O2) = 10.5 mol O2.Using the mole ratio (4 mol Al : 3 mol O2), calculate moles of Al: 10.5 mol O2 ×(4 mol Al / 3 mol O2) = 14 mol Al.Convert moles of Al to grams: 14 mol Al × (27 g Al / 1 mol Al) = 378 g Al.

Therefore, 378 grams of aluminum can react with 336 grams of oxygen to form aluminum oxide.

Which would be the biggest long-term benefit of building a city recycling center? A. building the new recycling building
B. supplying citizens with new collection bins
C. reducing the amount of garbage
D. operating new trucks for pickup service

Answers

Answer:

C. reducing the amount of garbage

Explanation:

Building a city recycling center has several potential benefits, but the biggest long-term benefit would be reducing the amount of garbage.  By decreasing the need to haul trash to landfills, the city can lower disposal costs, reduce environmental impact, and conserve natural resources.  Additionally, it can encourage more sustainable practices among businesses and residents, further reducing waste production and improving overall environmental health.

AgNO3 + Cu=_Cu(NO3)2 + Ag
need help balancing this equation

Answers

Answer:

2AgNO3 + Cu = Cu(NO3)2 + 2Ag

Explanation:

This is a simple substitution reaction.

For the equation to be balanced, the total number of elements on each side of the equation must be equal.

The right hand side contains 2 nitrogen and 6 oxygen, to balance this on the left add 2 to the back of silver nitrate. Thus silver on the right hand side of the equation must be 2.

Thus the equation is balanced.

Final answer:

To balance the chemical equation for the reaction between copper and silver nitrate, ensure you have an equal number of atoms for each element on both sides of the equation, resulting in 2 AgNO3 (aq) + Cu (s) → Cu(NO3)2 (aq) + 2 Ag (s).

Explanation:

To balance the chemical equation Cu (s) + AgNO3(aq) → Cu(NO3)2 (aq) + Ag (s), follow these steps:

Identify the reactants and products to understand what symbols go on each side of the arrow and where the + signs go.

Write the correct formulas for all compounds and elements, ensuring all ionic compounds are charge balanced.

Balance the equation by ensuring the same number of atoms of each element appears on both sides of the reaction.

Here is the balanced chemical equation:

2 AgNO3 (aq) + Cu (s) → Cu(NO3)2 (aq) + 2 Ag (s)

This reaction is an example of a single replacement reaction where silver (Ag) is displaced by copper (Cu). The copper starts as a solid and is oxidized to copper (II) nitrate, while silver nitrate is reduced to solid silver. Remember that the charge conservation is important, and therefore the number of electrons and the total charge must remain equal on both sides of the equation.

Which of the following is an inference?
a.

The flower is pink.
b.

Vinegar has a pungent aroma.
c.

A dog barks.
d.

A cup with steam coming from it will be hot to the touch.




Please select the best answer from the choices provided

A
B
C
D

Answers

Answer:

the answer is d

Explanation:

but wusup shawty

Final answer:

Among the provided options, 'A cup with steam coming from it will be hot to the touch' is an example of an inference because it is a conclusion based on the observation of steam, indicating the cup's contents are hot.

Explanation:

The question asks for the identification of an inference among four options. An inference is a conclusion reached based on evidence and reasoning rather than from explicit statements. Option d, 'A cup with steam coming from it will be hot to the touch', is an inference because it is a conclusion that one arrives at after observing steam, which suggests that the liquid inside the cup is likely hot.

Inference Examples

I didn't realize that they are husband and wife - an inference about their relationship.Who stole my durian smoothie? - an inference that someone took it without permission.

In the context of a joke, the question 'How many months have 28 days?' with the answer 'All of them' involves linguistic or logical inference as it plays on the expectation that people will think of February alone.

A new technology company is marketing drones for residential use. The bar graph shows the relation between number of sales and three types of marketing strategies over the company’s first five months of operation. What are the two biggest advantages of using a bar graph to display this kind of data? The graph provides a comparison of the different marketing strategies. The graph helps in selecting the best marketing strategy to improve sales. The graph helps to predict future sales near the end of the calendar year. The graph indicates how many people see the posted advertisements. The graph gives information about the number of people who have received emails.

Answers

Answer:

1- The graph provides a comparison of the different marketing strategies

2- The graph helps in selecting the best marketing strategy to improve sales

Explanation:

Hope this help

plz mark brainliest

Have a nice day!!!

Answer:  You need 2 answers:

The graph provides a comparison of the different marketing strategies.

The graph helps in selecting the best marketing strategy to improve sales.

Explanation:  I just took the test and these are correct.

What is the mole ratio that can convert from moles of A to moles of B?

Answers

There is no direct way to convert from the mass of one substance to the mass of another. To convert from one mass (substance A) to another mass (substance B), you must convert the mass of A first to moles, then use the mole-to-mole conversion factor (B/A), then convert the mole amount of B back to grams of B.

To convert from one mass (stuff A) to another (substance B), first convert A's mass to moles, then apply the mole-to-mole conversion factor (B/A).

Convert moles ratio:

A's mass to moles, then apply the mole-to-mole conversion factor (B/A), and then convert B's mole quantity back to grams.

There is no straightforward conversion from one substance's mass to that of another. To convert from one mass (stuff A) to another (substance B), first convert A's mass to moles, then apply the mole-to-mole conversion factor (B/A), and then convert B's mole quantity back to grams.

Find out more information about 'Conversion'.

https://brainly.com/question/4736731?referrer=searchResults

What is the main element that stars are made of

Answers

The majority of these stars are described as being main sequence, which means their cores are fusing HYDROGEN to create helium. The Sun is a main sequence star and its chemical composition mainly consists of hydrogen and helium with trace amounts of other elements.

HYDROGEN is the correct answer just test 2021

Other Questions
What was ARPANET?a precursor to the Internetan organization created to stabilize and unify the Internetthe first commercial Internet servicean organization devoted to standardizing the Internet What happened at the party convention for the Democrats that affected the 1860 presidential election?A. The Democrats nominated Abraham Lincoln for President.B. The Democrats nominated Jefferson Davis for President.C. The Democrats split into two parties and nominated two men for President, one from the North and one from the South.D. The Democrats supported slavery and nominated a northerner for President and a southerner for Vice President. Goffman's dramaturgical approach to human interaction emphasizes that Select one: a. we may radically alter our self-expression as we move from situation to situation. b. the self is a fixed, rigid entity defined by a social script. c. the frontstage and backstage selves are signs of a disturbed psyche. d. the self is not influenced appreciably by setting or context. ABD Tech has invested $20 million to install business intelligence software (BIS) at all of its branches across the globe so that it can access stored information in its servers for business analysis and decision making purposes. In this scenario, the cost incurred by ABD Tech is an example of _____A) acquisition costB) processing costC) storage costD) retrieval cost A cannonball is shot out of a long cannon and then a short cannon with the same amount of force. The short cannon cannonball has Group of answer choices more mometum, velocity, and impulse. more momentum only. more impulse only. less mometum. more velocity only. The average C - H bond energy in CH4 is 415 kJ / mol. Use the following data to calculate the average C - H bond energy in ethane ( C2H6;C - C bond ) , in ethane ( C2H4;C C bond ) , and in ethyne ( C2H2;C C bond ) . C2H6 ( g ) + H2 ( g ) rightarrow 2CH4 ( g ) Hrxn = - 65.07 kj / mol C2H4 ( g ) + H2 ( g ) rightarrow 2CH4 ( g ) H = - 202.21kJ / mol C2H2 ( g ) + 3H2 ( g ) rightarrow 2 CH4 ( g ) H = - 376.74kj / mol Average C - H bond Average C - H bond energy in ethane = kJ / mol energy in ethane = kj / mol Average C - H bond energy in ethyne = kJ / mol What is one reason that people want to minimize costs? A. Costs are often bad things that people don't want to accept. B. Costs are calculated differently by everyone. C. Costs always involve spending money. D. Costs always have to be paid before a benefit arrives. Which of the following are examples of rational numbers? Select all that apply A 2.25 g sample of an unknown gas at 63 C and 1.10 atm is stored in a 1.15 L flask. What is the density of the gas? density: g / L What is the molar mass of the gas? molar mass: A researcher has prepared culture media for mouse cells. Much to his surprise, when he places mouse cells in this media, the cells appear to swell and eventually burst. The researcher likely made a mistake preparing this culture media, creating a(n) _____ Which factors can prevent permanent fixation of an allele (i.e. maintain genetic diversity)? Hint: You're going to have to try different values than just those presented in the exercise--try to keep both alleles present!a. Gene Flow b. Genetic Drift c. Natural Selection d. Mutation i need a list of biotic factor listed from A to Z There are 19 animals , total of legs are 54 and the animals are pigs and ducks. How many pigs and ducks are there? 2. Volcanic islands that form over mantle plumes, such as the Hawaiian chain, are home to some of Earths largest volcanoes. However, several volcanoes on Mars are gigantic compared to any on Earth. What does this difference tell us about the role of plate motion in shaping the Martian surface? We know that the U.S. is a substantial net debtor to foreigners. How, then, is it possible that the U.S. received more foreign asset income than it paid out? with whom do casca and cinna side An object moves in a circle of radius R at constant speed with a period T. If you want to change only the period in order to cut the object's acceleration in half, the new period should be A) Th/2 B) 7V2. C) T/4. D) 4T E) TI2 Which statement best summarizes two major effects of modernization onworld religions? 1. A hollow conductor carries a net charge of +3Q. A small charge of -2Q is placed inside the cavity in such a way that it is isolated from the conductor. How much charge is on the outer surface of the conductor? A spherical shell of radius 9.7 m is placed in a uniform electric field with magnitude 1310 N/C. Find the total electric flux through the shell.